|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed. |
| 2 | M & L for brick work with flyash old size bricks, straight or curved on plan exc. 6mm mean radius, built in in cement mortar 1:6.complete all as specified and directed |
| 3 | M & L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 4 | M & L for walling of random rubble (but except stone), uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 5 | Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 6 | M & L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed |
| 7 | M & L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 9 | M & L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 10 | All as per item No above but in skirting over 10mm thick screeding in cement mortar 1:4 complete all as specified and directed. |
| 11 | M & L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed |
| 12 | M & L for Glazed ceramic tiles coloured (450x300mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed. |
| 13 | M & L for vitrified ceramic tiles light shade8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 14 | M & L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. |
| 15 | M & L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed. |
| 16 | M & L for chequered cement concrete tiles 25 x 25 cm x 22-25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 complete all as specified and directed. |
| 17 | Dismantling of old paver block any type any size complete all as specified and directed. |
| 18 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 19 | Refixing only 60mm thick factory made cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc.,by table vibratory method & pattern over and including new 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 20 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 21 | M & L for machine cut Kota stone slab flooring 18-20 mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. |
| 22 | M & L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & mirror polishing complete all as specified and directed. |
| 23 | M & L for only on old surfaces mirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified and directed. |
| 24 | Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 25 | M & L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone/brick masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 26 | M & L for 10mm thick rendering in cement mortar in CM (1:3) on ceiling ((at any surface) finished even and smooth without using extra cement, complete all as specified and directed. |
| 27 | M & L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick/stone work or concrete surfaces, finished even and smooth complete all as specified and directed. |
| 28 | M & L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. |
| 29 | M & L for preparation of newly plastered antifungal treatment surface of wall and applying one coat of wall primer,followed by application of wall Putty in two coat with proper sanding to obtain smooth and even surface, again applying one coat of primer and finally applying two coats of Distempering with 1st quality acrylic emulsion distemper (ready mixed ) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour, complete all as specified and directed. |
| 30 | M & L for preparation of newly plastered ceiling surfaces and applying two coats of white wash complete all as specified and directed. |
| 31 | M & L for preparation of new plastered of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over and over two coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastering surfaces, complete all as specified and directed.Make :- ASIAN/APEX/BERGER (Weather coat all guard) |
| 32 | Taking down old unserviceable rolling shutter & S & F steel rolling shutters gear operated type with bevel gear box & crank handle, thickness of laths 1.25mm with ball bearing as specified including all fitings like top cover, anchoring rod, hasp & staple etc and one shop coat of primer, erected in position as directed including all fixing items and making good disturbed surface to match the existing complete all as specified and directed. |
| 33 | S & F in repair mild steel ball bearing suitable size for rolling shutter complete all as specified and directed. |
| 34 | S & F in repair mild steel safety lever lock with 4 levers suitable size for rolling shutter complete all as specified and directed. |
| 35 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 36 | S & F for 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 37 | Refixing old 15mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 38 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 39 | S & F for 20mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 40 | Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors trenches including necessary cleaning, cutting, screwing complete all as specified and directed. |
| 41 | S & F in repairs grating round 125 mm dia PTMT minimum weight 50 gms fixed to Floor trap/Nahni trap with CM 1:6 etc complete all as specified and directed. |
| 42 | S & F for in repairs 15mm bore cast copper alloy chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 43 | S & F for r in repairs PVC (SWR) floor trap plain with grating incl jointing with solvent cement of 75mm dia. complete all as specified and directed. |
| 44 | S & F for in repair tubular towel rail, chromium plated brass 20mm dia 'D' type 60CM long between flanges complete all as specified and directed. |
| 45 | S & F for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 46 | S & F for in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed. |
| 47 | S & F for in repair CP brass shower rose with or without swivel joints 100mm size including fixing to steel pipe or union complete all as specified and directed. |
| 48 | S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed |
| 49 | S & F for in repair angle valves 15mm bore , cast copper alloy chromium plated fancy type, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 50 | S & F for in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed. |
| 51 | S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed. |
| 52 | S & F for repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and directed. |
| 53 | S & F in repairs vitreous china One piece EWC with slim soft close seat cover including good making, etc complete including making good to floor etc complete all as specified and directed. |
| 54 | S & F in repair plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed. |
| 55 | S & F for in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 56 | S & F for in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 57 | S & F 75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 58 | S & F 110mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 59 | S & F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 60 | S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 61 | S & F for in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed. |
| 62 | S & F in repair Stainless steel Soap dish, complete all as specified and directed.(Make: Prayag, Cat No BA-15 S and equivlent make) |
| 63 | Dismantling Wall and ceiling boards/wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 64 | Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,etc complete all as specified and directed. |
| 65 | S & F for solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame(including 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame) complete all as specified and directed. |
| 66 | Hacking out old broken glass up to 9.50 m height (any thickness size, quality or description) from steel frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 67 | S & F for 3mm thick plain sheet glass ordinary quality and glazing with oil putty upto 9.50M height in steel shutter in square n.exc 0.50 Sqm in each pane or any steel frame including glazing clips, complete all as specified and directed. |
| 68 | S & F for 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed. |
| 69 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded pointed in any mortar complete all as specified and directed. |
| 70 | M & L for 18-20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambs, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 71 | S & F for for 18mm thick PVC board of one side prelaminated or digital finished and other side plan white colour to make kitchen cabinet shutter/drawaer front shutters complete with and including all fittings as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed. |
| 72 | S & F for for 18mm thick PVC board both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete with and inculding all fittings as per specifications, complete all as specified and directed Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion complete all as specified and directed. |
| 73 | Refixing shutters of any description n exc 1 sqm each in same opening incl. taking down complete all as specified and directed. |
| 74 | Refixing shutters of any description exc 1.0 Sqm but n. exc 2 Sqm each in same opening incl. taking down complete all as specified and directed. |
| 75 | M & L for in repair aluminium powder coated sliding window, ventilator three track including aluminium powder coated decorated grill sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side complete all as specified and directed and as per Chief Engineer Drg. |
| 76 | S & F in repair Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. |
| 77 | M & L for in repair aluminium powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminium door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified and directed and as per Chief Engineer Drg. |
| 78 | Taking down chowkats with shutter (without taking off shutter from the frame) but n. exc 1.5 Sqm each complete all as specified and directed. |
| 79 | Taking down chowkats with shutter (without taking off shutter from the frame) exc. 1.5 sqm & n. exc 4 sqm each complete all as specified and directed. |
| 80 | S & F for in repair door closure hydraulically regulated designation No-3 universal type suitable for door shutter of 851 to 1000mm in width of aluminium body (die cast) weight between 61 to 80 kg in repair complete all as specified and directed. |
| 81 | S & F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified and directed. |
| 82 | Dismantling asbestos Cement /PPGI (corrugated, semi corrugated,Plain etc) sheets in roof covering complete all as specified and directed. |
| 83 | S & F for 6mm thick asbestos cement corrugated or semi corrugated sheets in roof fixed with L-type or J-type or cranked hook bolts (including Ridge) complete all as specified and directed. |
| 84 | S & F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws fixed with L & J hooks and washers, in roofs, walls etc with grade of zink coating 275 complete all as specified and directed. |
| 85 | S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 86 | Dismantling of existing structure; steel any type complete all as specified and directed. |
| 87 | S & F rolled mild steel as in angle setion, fixed indepenntly with or without connecting plates or welding with existing steel or iron surfaces etc and similar to walls like cooler stand fixing confirming to Gde E-165 (Fe 290) including necessary cutting, welding etc and fixing in position complete all as specified and directed. |
| 88 | M & L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 89 | M & L for washing rubbing down and stopping of old painted surfaces at wall, removing nails, making good holes, making good cracks with putty etc and distempered surfaces of wall and applying one coat of oil bound distemper white or tinted etc complete all as specified and directed. |
| 90 | M & L for washing rubbing down and stopping of old painted surfaces of wall/Jallies, removing nails, making good holes, making good cracks with putty etc and applying one coat of cement base paint at any height etc complete all as specified and directed. |
| 91 | S & F solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet uses instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 92 | S & F factory made solid PVC moulded door shutter with wood free EPS, 28to30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part -II) 2010 complete all as specified and directed. |
| 93 | S & F rotational moulded synthetic (HDPE) water storage tank 500 litre capacity hoisted & fixed in position all as specified in SSR Part-I including dismantling of old water tank complete all as specified and directed. |
| 94 | S& F rotational moulded synthetic (HDPE) water storage tank 1000 litre capacity hoisted & fixed in position all as specified in SSR Part-I including dismantling of old water tank complete all as specified and directed. |
| 95 | S&F in repair Swanneck pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed. |
| 96 | S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mm and bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed. |
| 97 | S & F in repair stainless steel plate rack made of 0.50mm thick of over all size 914mm x 609mm x 255mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. Please Enable Macros to View BoQ information |
| 98 | S & F in repair stainless steel plate rack made of 0.50mm thick of over all size 914mm x 609mm x 255mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. Please Enable Macros to View BoQ information |
