|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete,brick etc and making good disturbed ground and preparing post holes for providing new post in any type of soil complete all as specified and direted. |
| 2 | Dismantling fencing wire mesh, any type complete all as specified and direted. |
| 3 | M&L for angle iron as in fencing post incl cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron, fillets ( for securing wire mess) incl. all necessary drilling bolting or riveting etc confirming to Fe 290 Gde E -165 complete all as specified and direted. |
| 4 | M&L, for PCC 1:3:6 type C-2 in post holes and similar works complete all as specified and direted. |
| 5 | Supply only Chain link MS galvanised fencing of mesh size 50mm x 50mm x 2.50mm complete all as specified and direted. |
| 6 | Fixing only chain link fencing including line wires, any mesh size, type of standards rail straining bolts etc,4mm dia.wire complete all as specified and direted. |
| 7 | S&F in repair of galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining bolts, including, securing or tying at crossings with provison of galvanised mild steel wire etc complete all as specified and direted. |
| 8 | Providing & Fixing concertena coil fencing with punched tape concertena coil 600m dia 10m openable length (total length 90m) having 50 Nos rounds per 6m length, up to 3.0m height of wall with angle iron Y shaped placed 2.0m or 3.00m apart all complete as per direction of engineer-in-charge, with reinforced barbed wire tape (R.B.T.)/spring core (2.5mm thick) wire of high tensile strength of 165 Kg/Sqcm with tape (0.52mm thick and weight 43.478 gm/metre complete all as specified and direted.Note : (cost of M.S. Angle shall be paid separately under relevant items.) |
| 9 | S&F of mild steel screw bolts (machine cut) with hexagonal or square heads at one end to be fitted with washers and one hexagonal or square nut, n.exc. 5cm long dia of neck 12mm. complete all as specified and direted. |
| 10 | M&L for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and direted. |
| 11 | Demolition of stone/brick masonry laid dry complete all as specified and direted. |
| 12 | M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and direted. |
| 13 | M&L PCC 1:3:6 Type C-1 using 20 mm graded stone aggregate in surface channels and drains/benching complete all as specified and directed forming fair and smooth without using extra cement complete all as specified and direted. |
| 14 | M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in copping bed block etc including weathering slightly, rouded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick in CM 1:4 on stone masonary and brick masonary surfaces finished fair and even complete all as specified and dirceted. |
| 16 | M& L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed. |
| 17 | All as per item No 16.00 above here in before but except stone complete all as specified and direted. |
| 18 | Extra over random rubble stone walling for hammer dressing to face of sandstones and dressing to face beds & joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm complete all as specified and directed. |
| 19 | M&L for raised pointing to random or polygonal rubble,uncoursed or brought upto coursed in CM 1:4 complete all as specified and direted. |
| 20 | Demolition of lime concrete (unreinforced) in any position and of any description not other wise specifically provided for complete all as specified and directed. |
| 21 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 22 | Material & labour for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade incuding 25mm sand cushioning duly watering and consolidation complete all as specified and as directed. |
| 23 | Dismantling of sand stone slab as in cover slab/flooring etc of any thickness laid bedded and pointed in any mortar complete all as specified and directed. |
| 24 | M&L 50 mm thick rough dressed sand stone slab for manhole covers jointed and pointed in CM(1:4) complete all as specified and directed. |
| 25 | All as per item No 24.00 above here in above but except stone slab complete all as specified and direted. |
| 26 | Material & Labour for preparation of old surfaces of kerb stone and applying two coats of synthetic enamel paint of different colour for neat and smooth finishing complete all as specified and directed. |
| 27 | Material & Labour for applying two coats of glossy indigo floor coat emulsion paint premium series or equivalent on existing old paver block/chequered tiles /floors of any pattern incl removing caked mud,trading oil and greasy spots,cleaning with water complete all as specified and directed. |
| 28 | M&L for framed work of Fe-410W Gde E-250 quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 29 | M&L for Steel work in gates including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 30 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 31 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. Please Enable Macros to View BoQ information |
