|
| 1 | DESCRIPTION OF ITEMS |
| 2 | M & L for cleaning of blockage of traps of any type or of any size by way of cleaning, desluging foreign material as well as roding of sewer line from trap to first manhole manually/ mechanically and keeping sewer line functional upto first man hole manually entering from floor trap/nahani trap/water closet/soil waste/vent pipe/gully trap and removing the sludge to out of MoD land complete all as directed by Engr-in-charge. |
| 3 | M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation and mass concrete incl demolition complete all as specified. |
| 4 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drain, incl demolition complete all as specified and directed. |
| 5 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred / stopped end, complete all as specified and directed. (Inner girth only measured) complete all as specified and directed. |
| 6 | M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, set in CM 1:6 incl demolition complete all as specified and directed. |
| 7 | M & L for TMT bars 10mm dia and over, cut to length bent to shape required including cranking, beinding spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed. |
| 8 | Ditto- all as per item No 6 above but MS round bar 10 mm dia and over as in handles of manhole covers |
| 9 | Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 incl demolition of existing masonry complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping including weathering and throating including necessary form work and demolition etc., complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, including to be finished even and smooth (without using extra lime or cement) finishing the surfaces fair and even, complete all as specified and directed. |
| 12 | M&L for 15mm thick rendering on other than faces of brick/concrete surfaces in CM 1:6, including finishing the surfaces fair and even complete all as specified and directed. |
| 13 | S&F 150 MM bore Reinforced concrete pipes, class NP3, laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds and Excavation & earth work including complete all as specified and directed. |
| 14 | S&F 200 MM bore Reinforced concrete pipes, class NP3, laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds and Excavation & earth work including complete all as specified and directed. |
| 15 | M&L 150 mm bore Sail-glazed stoneware trenches and jointed , laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds and incl excavation & earth work complete all as specified and directed. |
| 16 | M&L 200 mm bore Sail-glazed stoneware trenches and jointed , laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, incl Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds and incl excavation & earth work complete all as specified and directed. |
| 17 | Taking up existing cover of soak well / septic tank of any size and cleaning of same including dewatering and digging out sludge, mud state and removing the sludge to a distance exc. 250m and n. exc. 500m and disposed off as directed by the Engineer-in-charge cleaning of inlet & outlet pipes and tank with clean water and placing the cover in position, complete all as specified and directed.Note :- Measurement shall be made for size of tank/soak well up to water level |
| 18 | Taking up existing cover of man holes and cleaning of man holes to any depth and of any size by taking out semi-solid/solid sludge complete and removing sludge to out of MoD land and placing the man hole cover in position complete all as specified and directed by Engr-in-Charge. |
| 19 | Cleaning of 100mm bore and up to and including 150mm bore sewage lines and blocked pipe lines and disposal of waste materials / spoil up to a distance n. exc. 50m by any means complete all as directed.Note :- Relaying / refixing or S&F of new pipe etc where required and cleaning of manholes shall be measured seperately. |
| 20 | Cleaning of 200mm bore and up to and including 300mm bore sewage line including manhole and blocked pipe lines and disposal of waste materials / spoil up to a distance n. exc. 50m by any means complete all as directed.Note :- Relaying / refixing or S&F of new pipe etc where required and cleaning of manholes shall be measured seperately. |
| 21 | S&F 100 mm dia, cast iron sand cast soil waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors, or fixed to walls including dismantling of old pipe complete all as specified and directed |
| 22 | S&F 75 mm dia, cast iron sand cast soil waste and vent pipe, in any length with or without ears, with cement joints, laid in trenches or in floors, or fixed to walls including dismantling of old pipe complete all as specified and directed |
| 23 | S&F in repairs 100mm dia, cast iron sand cast Bends laid and jointed complete all as specified and directed. |
| 24 | S&F in repairs 75mm dia, cast iron sand cast Bends laid and jointed complete all as specified and directed. |
| 25 | Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store complete all as specified and directed. |
| 26 | S&F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and directed. |
| 27 | S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed to walls complete all as specified and directed. |
| 28 | S&F in repair 100mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 29 | S&F in repair 100mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 30 | S&F in repair 100mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed. |
| 31 | S&F in repair 75mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 32 | S&F in repair 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed. |
| 33 | M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in sub base of floors etc incl demolition, complete all as specified and directed. |
| 34 | M & L for non skid tiles, exterior grade, pattern of size 300x300mm, 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and including 15mm thick cement screed bed in CM 1:4 and dismantling of existing tiles complete all as specified and as directed. |
| 35 | Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 36 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified |
| 37 | M&L for preparation of new plastered surfaces for Finishing walls with Acrylic Smooth exterior weather paint of required shade : New work (applying Two coat @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall /ceiling surface complete all as specified and as directed. |
| 38 | Note : Tenderers may note that amount of credit Rs 80,285.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
