|
| 1 | Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 m wide and exceeding 1.5 mtr but not exceeding 3.0 mtr in depth; for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in hard/ dense soil, complete all as specified and directed. |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out hard/ dense soil, complete all as specified and directed. |
| 4 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft/loose soil, complete all as specified & directed. |
| 5 | Removing excavated soil n exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified & directed. |
| 6 | Material and labour for cement concrete 1:4:8, type D-2 (using 40mm aggregate) as in foundations, filling and mass concrete complete all as specified & directed. |
| 7 | Material and labour for cement concrete 1:2:4, type B-1 (using 20mm aggregate) as in foundations, filling and mass concrete complete all as specified & directed. |
| 8 | Material and labour for Brickwork with sub class ‘B’ bricks, designation 100, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified and directed. |
| 9 | Material and labour for cement concrete 1: 2:4, Type B-1, (20mm graded crushed stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 10 | Material and labour for rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement.complete all as specified and directed. |
| 11 | Use & waste form work to soffits of suspended slabs, such as roof slabs, landings and similar work not exceeding 200 mm thick with rough finished flat surfaces of concrete, complete all as specified and directed by Engr-in-Charge. |
| 12 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished flat surfaces, complete all as specified & directed. |
| 13 | Material and labour for formwork to faces of walls, retaining walls, etc rough finished flat surfaces, complete all as specified & directed. |
| 14 | Material and labour for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed. |
| 15 | Material and labour for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, fdn beams. Plinth beams, bases of columns etc, basement slabs, under reamed piles and mass concrete, complete all as specified & directed. |
| 16 | Material and labour for reinforced cement concrete M-25 design mix (using 20mm graded crushed stone aggregate) as in walls etc, complete all as specified & directed. |
| 17 | Material and labour Asbestos cement pipes 150mm dia for sewage, confirming to IS : 6908 : 1991 with & including AC coupler joints sealed with rubber gasket (EPDM/SBR) as per IS 5382 complete including sectional hydro testing (including cost and conveyance of water to site for testing), laid in trenches to required level/gradient, as per manufacturer's instruction complete all as specified and directed. |
| 18 | Material and labour Asbestos cement pipes 200mm dia for sewage, confirming to IS : 6908 : 1991 with & including AC coupler joints sealed with rubber gasket (EPDM/SBR) as per IS 5382 complete including sectional hydro testing (including cost and conveyance of water to site for testing), laid in trenches to required level/gradient, as per manufacturer's instruction complete all as specified and directed. |
| 19 | Material and labour Asbestos cement pipes 300mm dia for sewage, confirming to IS : 6908 : 1991 with & including AC coupler joints sealed with rubber gasket (EPDM/SBR) as per IS 5382 complete including sectional hydro testing (including cost and conveyance of water to site for testing), laid in trenches to required level/gradient, as per manufacturer's instruction complete all as specified and directed. |
| 20 | Material and labour for PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 21 | Material and labour for PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engr-in-charge. |
| 22 | Material and labour for PVC (SWR) bends 110mm dia any radius complete all as specified and directed. |
| 23 | Material and labour PVC (SWR) bends 75mm dia any radius complete all as specified and directed. |
| 24 | Material and labour PVC (SWR) vent cowl 75mm dia complete all as specified and directed. |
| 25 | Material and labour Stack clamps for 110mm dia pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 26 | Material and labour Stack clamps for 75mm dia pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 27 | Material and labour Concrete 1:3:6 type C-2 using 40mm graded crushed stone agg, bed to drain pipes 150mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 28 | Material and labour Concrete 1:3:6 type C-2 using 40mm graded crushed stone agg, bed to drain pipes 200mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 29 | Material and labour Concrete 1:3:6 type C-2 using 40mm graded crushed stone agg, bed to drain pipes 300mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 30 | Material and labour Concrete 1:3:6 type C-2 using 40mm graded crushed stone agg, bed to drain pipes 110mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 31 | Material and labour Concrete 1:3:6 type C-2 using 40mm graded crushed stone agg, bed to drain pipes 75mm including packing under, and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 32 | Supply & fixing LLDPE septic tank With UPFLOW Filter including media, designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 30 users complete all as specified and directed. |
| 33 | Material and labour for soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth all as specified and directed. |
| 34 | Providing and fixing SFRC (Steel fiber reinforced concrete) man hole cover, factory made, confirming to IS: 12592 upto date with lifting arrangement including frame of dia 610mm with medium duty ISI marked and fixing in position the same to correct lines and levels in 1:3 cement sand mortar over manhole complete in all respects to the satisfaction to the Engineer-in-charge.. |
| 35 | Providing and fixing SFRC (Steel fiber reinforced concrete) man hole cover, factory made, confirming to IS: 12592 upto date with lifting arrangement including frame of square in shape not less than 350x350mm size with medium duty ISI marked and fixing in position the same to correct lines and levels in 1:3 cement sand mortar over manhole complete in all respects to the satisfaction to the Engineer-in-charge.. |
| 36 | Material and labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed. |
| 37 | Material and labour for mild steel TMT bars of 5mm dia and over upto and incluidng 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed. |
| 38 | Material and labour for cement concrete type C-2 1:3:6 (using 40mm aggregate) as in surface channels and drains complete all as specified and directed. |
| 39 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed. |
| 40 | Supply and fixing Rotational moulded polyethylene water storage tanks 1000 Litres, capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 41 | Supply and fixing 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. Minimum weight -455gm complete all as specified and directed. |
| 42 | Material and labour for steel water tubing 50mm dia, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 43 | Material and labour for steel water tubing 25mm dia, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 44 | Material and labour for 50mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 45 | Material and labour for 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 46 | Material and labour for cement concrete 1:3:6, 75mm thick type C-2, (20mm graded aggregate) as in Plinth Protection etc, finished surfaces even and fair without using extra cement complete all as specified and directed. |
| 47 | Supply only water proofing compound ISI marked complete all as specified and directed |
| 48 | Demolition of Brick/precast concrete block walling built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed. |
| 49 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 50 | Demolition and breaking up drain pipes 200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 51 | Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 52 | Demolition and breaking up drain pipes 300mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 53 | Demolition and breaking up drain pipes 100/75mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 54 | Cutting into existing manholes for connecting new drains of 300mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 55 | Cutting into existing manholes for connecting new drains of 200mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 56 | Cutting into existing manholes for connecting new drains of 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 57 | For Credit Schedule refer tender documents. The amount of credit schedule shall be deducted from total quoted amount of BOQ to arrive contract sum. Please Enable Macros to View BoQ information |
