|
| 1 | M&L bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness with 5.5 % binder content using paving bitumen of grade VG-30 penetration by weight of total mix laid using mechanical paver, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc. 12 tonne power roller and including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly a priming / tack coat with bitumen primer at 5 Kg per 10 Sqm using paving bitumen over existing black top surfaces complete all as specified and directed. |
| 2 | Note: For design purpose min. binder content is specified as 5.5% for VG-30 grade bitumen and it shall not reduce under any circumstances. During design stage, if binder content exceeds 5.5% no extra payment shall be made to contractor for excess use of binder. |
| 3 | M&L premix bituminous macadam of paving bitumen with binder content of 4% by weight of total mix, any penetration laid/ rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) |
| 4 | M&L preparing bituminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine as per manufacturers instructions complete all as specified and directed. |
| 5 | S&F in repair road studs (Cat Eye) two way relective of size 100 x 100 x 25 mm (min size) and max size according to manufacturer made with ABS material, scratch and abrasion resistant, micro plastic, temperature resistant body complete all as specified and as directed |
| 6 | S&F in repairs solar cat eye aluminum alloy shall (100 % water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions complete all as specified and directed. |
| 7 | M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), and including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and demolition complete all as specified and directed. |
| 8 | M&L preparation of new concrete surfaces of any description over 10 cm girth or width or otherwise described and including applying two coats of synthetic enamel paint over a coat of primer as per manufacturers instructions complete all as specified and directed. |
| 9 | M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing and including demolition complete all as specified and directed. |
| 10 | M&L 50 mm thick M Sand (stone dust) cushioning for laying of precast concrete interlocking tiles and including watering and consolidation complete all as specified and directed. |
| 11 | M&L 100 mm thick, M 50 grade machine pressed precast concrete interlocking paver block rubber mould using grey cement and pigment of any shape and size conforming to IS 15658-2006 and including demolition complete all as specified and directed. |
| 12 | M&L PCC 1:2:4 type B0 usong 12.5 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. Please Enable Macros to View BoQ information |
