|
| 1 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed. |
| 2 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed |
| 5 | Taking down shutters of any description not exc. 1 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed |
| 6 | Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each and refixing in same opening after easing and adjusting including refixing builders hardware as required and renewal of screws etc. complete all as specified and directed |
| 7 | M&L for inspecting joinery and carrying out petty repairs, easing adjusting door/ window/ kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed.Note : (i) Each repair job shall be measured as one job. |
| 8 | S&F solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed. |
| 9 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed. |
| 10 | M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 11 | S&F 2nd class hard wood, plain framed, panelled shutters (any number of panels), 35 mm thick with panels of timber flat on both sides (feather edged), or of veneered particle Board medium density, wood particle board with commercial face veneers; fitted to chowkhats complete all as specified and directed. |
| 12 | M&L for 2nd class hard wood (Sal) glazed and skeleton shutters 35 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. with sash bars divided into squares with plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 13 | M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on one face and other face covered with decorative face veneer with lipping/frame to match including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 14 | S&F 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete fixed to wooden/steel frame including necessary welding, cutting, opening etc. complete all as directed. |
| 15 | M&L for 2nd class hard wood (Sal) glazed and skeleton shutters 30 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. with sash bars divided into squares with plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 16 | S&F Aluminium plate type II, gate and shutter hook and eye of size 125 mm complete all as specified and directed. |
| 17 | M&L for 4.8 mm thick sheet glass ordinary quality and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 18 | M&L for 3 mm thick sheet glass frosted and fixed with oil putty or rubber beading, wooden/aluminium beads and provsion of glazing pins where required in squares exceeding 0.50 Sqm in each pane fixed in wooden/ aluminium/ steel windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 19 | Cutting holes in brick walls/PCC block wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4, type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed. |
| 20 | Cutting holes in stone masonary wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4, type B-1, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed. |
| 21 | M&L for preparation of new or previously untreated wooden surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 22 | S&F in repair 600 mm x 450 mm x 5.5 mm thick bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and aluminium angle alround fixed to wooden plugs with chromium plated brass screws & washers complete all as specified and directed. |
| 23 | S&F in repair for towel rail 600 mm long of PTMT (minimum weight 190 grm) fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed. |
| 24 | S&F in repair brass mortice lock 4 levers, vertical type, of size 100 mm including plate and two keys including making hole in pressed steel frame complete all as specified and directed. |
| 25 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 27 | S&F solar/sun control film 50 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed. |
| 28 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 30 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specified and directed. |
| 31 | S&F extruded aluminium alloy handles, fabricated type, anodised 125 mm size complete all as specified and directed. |
| 32 | S&F 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. |
| 33 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specified and directed. |
| 34 | S&F extruded aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed. |
| 35 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed. |
| 36 | S&F aluminium anodised barrel tower bolt of extruded section 125 mm long and fixed complete all as specified and directed. |
| 37 | S&F 75 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 38 | S&F in repair 300 mm, brass ordinary rat tail rod pattern spring including roller and roller plate complete fixed to wooden/steel frame including necessary welding, cutting, opening etc. complete all as directed. |
| 39 | S&F in repair 18/19 mm thick veneered particle boards interior grade, solid core, general purposes type, with with decorative veneer on one face, fixed with screws to timber frame work complete all as specified and directed. |
| 40 | M&L for external teak wood lipping, 6 mm thick and 18/19 mm wide fixed with nails complete all as specified and directed. |
| 41 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed. |
| 42 | S&F in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm complete all as specified and directed. |
| 43 | S&F Ball catches (magnetic catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50 x 15 mm and fixed complete all as specified and directed. |
| 44 | S&F in repair plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads cross sectional area exc. 6 Sqcm but not exc. 13 Sqcm in second class hard wood complete all as specified and directed. |
| 45 | S&F in repair second class hard wood boarding 25 mm thick, planed both sides with butt joints fixed with nails in any situation complete all as specified and directed. |
| 46 | S&F 100 mm long hasp & staple Aluminium anodised, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed. |
| 47 | M&L for forming jambs etc to opening, including cutting, toothing proper bonding into old work, also facing, jointing and pointing to match the existing work, new work built in CM 1:4 complete all as specified and directed. |
| 48 | S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed . |
| 49 | Removing existing grills from window and refixing the same after carrying out repairs for windows to external/ internal side of buidling complete all as specified and directed. |
| 50 | S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/ windows/ ventilators, sliding/ fixed/ openable type with one or more rebates including joining cleat for fixing complete with necessary fittings complete all as specified and directed. |
| 51 | S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium door shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified and directed. |
| 52 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 53 | Dismantiling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 54 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 55 | S&F steel rolling shutters, with lath thickness of 1.25 mm without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, manual type complete all as specified and directed |
| 56 | S&F collapsable steel gate, top hung consisting for channel pickets, pivoted flats bars, top and bottom runners and wheel, handle etc as specification, erected in position and securing runners with holdfast and brackets complete all as specified in clause No. 10.24 of SSR part-I and consisting of following:-MS channel - Hot rolled medium channel 18 x 9 x 3 mmTee and flats for top and bottom runners with a minimum web of 40 x 12 mm and flange of 40 x 6 mmDistance between centre to centre of channel pickets - 10 cm |
| 57 | M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. Please Enable Macros to View BoQ information |
| 58 | M&L for preparation of old painted steel, surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. Please Enable Macros to View BoQ information |
