Tender For Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27), Jalgaon-Maharashtra

TDR : 54872951

Tender Notice
BOQ

8 Days Left

Jalgaon , Maharashtra

Tender Brief : Tender For Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27)

Document Fees
₹ 2000 /-

EMD
₹ 10000.0 /-

Tender Value
Refer document

Submission Date
06-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supplying and replacing MNX three pole power contactors {L&T MNX Power Contactors 415V AC (3 Pole)}/ Siemens/Metasol make 3 Pole, 3 Phase, AC (AC magnetic contactor, suitable for use with 3TF series motor control systems) for motor starter:
2	MNX 9
3	MNX 12
4	MNX 18
5	MNX 25
6	MNX 40
7	MNX 140
8	MNX 185
9	MNX 225
10	MNX 300
11	MNX 400
12	MNX 550
13	MNX 650
14	SIEMENS - 3TF51
15	SIEMENS - 3TF53
16	LS Make MC - 225 a/4
17	Supplying, erecting & marking MCB with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board:
18	25 AMP 415 Volt mark
19	32 AMP 415 Volt ISI mark
20	40 AMP 415 Volt Isl mark
21	63 AMP 415 Volt ISI mark
22	125 AMP 415 Volt ISI mark
23	200 AMP 415 Volt ISI mark
24	Supplying and erecting electrical control panel electrical components:
25	INDICATOR R, Y, B MAKE- TECNIC, 22.5 mm
26	VOLT METR, range 0 - 500 volts, 96x96
27	CT OPERATED AMMETER, range 0 - 200 amp., 96x96
28	ROTARY SWITCH RYB AMP./VOLTMETER
29	C- channel
30	Rewinding of electric motor of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.:
31	Upto 10 HP
32	Upto 20 HP
33	Upto 40 HP
34	Upto 100 HP
35	Upto 150 HP
36	Upto 250 HP
37	Upto 350 HP
38	Upto 450 HP
39	Supplying and replacing No-Volt-Coil for motor having DOL starter and Star-Delta Starter from:
40	Upto 15 HP
41	Upto 30 HP
42	Upto 90 HP
43	Upto 125 HP
44	Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe:
45	2CX10 SQMM
46	4CX10 SQMM
47	4CX16 SQMM
48	4CX25 SQMM
49	4CX35 SQMM
50	4CX50 SQMM
51	3.5CX70 SQMM
52	3.5CX95 SQMM
53	3.5CX120 SQMM
54	4CX70 SQMM
55	4CX95 SQMM
56	4CX120 SQMM
57	4CX150 SQMM
58	4Cx180 SQMM
59	4CX240 SQMM
60	4CX300 SQMM
61	Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe:
62	1CX25 SQMM
63	1CX35 SQMM
64	1CX50SQMM
65	2CX2.5 SQMM
66	2CX4 SQMM
67	2CX6 SQMM
68	2CX10 SQMM
69	3CX2.5 SQMM
70	3CX4 SQMM
71	3CX6 SQMM
72	3CX10 SQMM
73	4CX4 SQMM
74	4CX6 SQMM
75	4CX10 SQMM
76	Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable with necessary material:
77	2.5 to 16 sq.
78	25 to 50 sq.
79	70 to 95 sq.
80	120 to 185 sq. mm.
81	240 sq. mm.
82	300 sq. mm.
83	400 sq. mm.
84	Supplying & erecting crimping type copper lugs for cable complete:
85	Upto 50 sqmm
86	Upto 70-120 sqmm
87	Upto 150-300 sqmm
88	400 sqmm
89	Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), aluminium conductor laid in provided trench / pipe:
90	Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 150 sq. mm. aluminiumconductor laid in provided trench / pipe
91	Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminiumconductor laid in provided trench / pipe
92	Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 240 sq. mm. aluminiumconductor laid in provided trench / pipe
93	Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 300 sq. mm. aluminiumconductor laid in provided trench / pipe
94	Supplying , erecting & terminating XLPE insulated galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 400 sq. mm. aluminiumconductor laid in provided trench / pipe
95	Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable with necessary material:
96	2.5 to 16 sq.
97	25 to 50 sq.
98	70 to 120 sq.
99	150 to 185 sqm.
100	240 to 300 sqm.
101	400 sqm.
102	Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )XLPE HT cable with necessary material:
103	Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial
104	Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial
105	Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessarymaterial
106	Providing and erecting Heat shrinkable out door termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial
107	Providing and erecting Heat shrinkable outdoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial
108	Providing and erecting Heat shrinkable outdoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessarymaterial
109	Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial as
110	Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial
111	Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessarymaterial
112	Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x 400 sq. mm. with necessary material
113	Fault detection and repairing of MCC panel and ATS panel:
114	Fault detection and repairing of MCC panel and ATS panel as per site requirement (labour part only)
115	Sub Stations (SS) works:
116	Supply of transfomer oil
117	Overhauling of 200 KVA transformer
118	Overhauling of 800 KVA transformer
119	Overhauling of 1000 KVA transformer
120	Supplying and erecting 11 kV outdoor type gang operated air break, triplepole switch 200 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on providedcross arm with adequate length of \\"C\\" class G.l. pipe for operating handleerected on extended square shaft. The operating handle provided with lockand key at suitable height from ground level with necessary clamp.
121	Supplying and erecting 11 kV outdoor type gang operated air break, triplepole switch 400 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on providedcross arm with adequate length of \\"C\\" class G.l. pipe for operating handleerected on extended square shaft. The operating handle provided with lockand key at suitable height from ground level with necessary clamp.
122	Supplying and erecting, 11 kV outdoor type drop out fuse with insulatorcomplete with fuse holders, fuse barrel with metal fitting, fuse elementmounted on M.S. channel with working current of 15A capacity completeerected on provided cross arm.
123	Supplying and erecting fencing of section having size 2450 mm in height fromground level and 1200 mm width with angle iron frame work erected in CCfoundation and painted complete as per specification no SS-AS/FSG
124	Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m longfixed at the middle of the fencing frame and the other side inclined at 30 degreeangle, in cement concrete foundation of 15 x 15 x 40 cm complete duly paintedwith one coat of red oxide and two coats aluminium paint complete.
125	Supplying and erecting double leaf hinged door each 1500 mm in width x 1850mm in height using B class, GI pipe with angle iron supports, chain link wiremesh (jali) complete supported on channel iron, erected in foundation, and paintedcomplete
126	Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barbwith a gap between two bars of 75 mm. firmly fixed on provided angle supportswith necessary materials complete. (6.044 meters/kg.).
127	Transportation of 11/22 kV transformer above 315 kVA to 1000 kVA withoutloading & unloading (for handing over to section store/ repair works only)
128	Dismantling the existing distribution transformer of any capacity from theplinth / foundation safely without any damages.
129	Dismantling existing DO / AB switch set complete from D.P. structure in anapproved manner.
130	Supplying and erecting 11 kV fuse barrel with metal fittings complete.
131	Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWGcomplete erected for connections on H.T. sides.
132	Supplying and erecting extra thick alkathene pipe 10 mm dia. erected toenclose bare conductor wires complete.. (use shall be restricted to H.T.)
133	Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mmsuitable for 11 kV with brass couplings etc. for removing drop out fuses at 6meters length, 4 pieces each with rain shade with hand grip including earthlingchain 1.5m complete.
134	Supplying and erecting copper tubular bus 20 mm dia 1.6 mm (16 SWG) thickfor the use of high tension over head bus and erected on provided HTinsulators with clamps, nuts and bolts complete. (weight per meter of bus isabout 1.7 kg.)
135	Supplying and erecting clamps, made out of 25x3 mm, copper strips to befixed to tubular bus for connecting the bare copper wire to other equipment, withbrass nuts bolts of suitable dia complete.
136	Supplying and erecting anti climbing devices, fabricated from pole clamps ofMS flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erectedon pole complete.
137	Supplying and fixing PVC synthetic elastomer electrically insulating matwith class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thicknessup to 11 kV
138	Supplying , erecting Indoor LED Fittings:
139	Supplying and erecting CRCA powder coated corridor/passage light LEDfitting (4 feet) Max. 17W with high transitivity diffuser with system lumensoutput of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCTupto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95,operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs.at L70B50, including driver, with end caps on provided PVC Block / woodenboard with 3 years warranty.
140	Supplying , erecting Outdoor LED Fittings:
141	Supplying and erecting integrated LED flood light fitting Max. 100W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty
142	Supplying and erecting integrated LED flood light fitting Max. 195W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty
143	Supplying , erecting point wiring and MCBDBs:
144	Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduitwith 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthingand required accessories as per specification No: WG-PW/SW
145	Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type)
146	Supplying , erecting Cable Enclosures / Excavation and Earthing:
147	Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, various sections of iron, plates, chequered plates, rods, bars, MSpipes, etc. for panel board or any other purpose with bending, cutting, drillingand welding complete erected at the position with necessary materials dulypainted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority.
148	Supplying and laying (including excavation of suitable width & depth up to 90 cm)120 mm outside dia. double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete.
149	Supplying and laying (including excavation of suitable width & depth up to 90 cm)160 mm outside dia, double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete.
150	Supplying and laying (including excavation of suitable width & depth up to 90 cm)200 mm outside dia, double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete.
151	Excavating hard Rock or bituminous road by chiselling for preparing pit forpole / stay/earth plate / for laying cable/ pipe & clearing the site by removingdebris & making the site as required complete.
152	Excavating hard murum / stone metal road by chiselling for preparing pit forpoles stay or earth plates or for laying cables, pipes & clearing the site byremoving debris & making the site as required complete.
153	Excavating soft murum / soft soil road by chiselling for preparing pit for polesstay or earth plates or for laying cables, pipes & clearing the site by removingdebris & making the site good complete.
154	Supplying & laying (including excavation) half round reinforced cementconcrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in properline, level and slope including providing and fixing collars in cement mortar 1:2and curing etc. complete.
155	Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm withfunnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results
156	Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results
157	Supplying, installation and testing of maintenance free earthing comprising ofElectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecularcopper bonded earthing rod of Length 3m along with 25 kg Carbon basedenvironment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the results
158	Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnelwith a wire mesh for watering and brick masonry block C.l. cover with minimum25 kg Carbon based environment friendly back fill Ground Enhancing compoundcomplete with all materials, testing & recording the results
159	Supplying and erecting GI strip of high purity required size used for earthing onwall and/or any other purpose with necessary GI clamps fixed on wall paintedwith bituminous paint with joints required.
160	Service charges for Manpower of Services:
161	Service charges for Manpower of Helper Services
162	Service charges for Manpower of Skilled Electrician Services
163	Supply and installation of Lifting tools and tackels:
164	Manual chain pulley block with trolly (capacity- 5 Tonnes)
165	Electrical hoist of capacity- 5 Tonnes with trolley
166	Supply and installation of Steel Poles:
167	Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm diawith 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively andtotal 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg)
168	Supply and installation of Accessories for Outdoor Fittings:
169	Supplying and erecting Street light bracket for erection of Double fittingmade from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole capof 300 mm length 100 mm dia duly welded
170	Supply and installation of WIRING:
171	Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminiumPVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWGcomplete erected with required size of porcelain reel insulators and 16 SWGG.I. binding wire.
172	Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminiumPVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWGcomplete erected with required size of porcelain reel insulators and 16 SWGG.I. binding wire.
173	Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch, earthing and requiredaccessories
174	Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch, earthing and requiredaccessories
175	Repairing work for 20 HP Centrifugal Motor Pump set:
176	Supply of Following spares for above pumpset:
177	Motor Cooling Fan
178	Rotter Balancing
179	Best Quality grease AP 3
180	Bearing Cap
181	Motor Top bearing
182	Motor Bottom bearing
183	Motor top and bottom Shaft Welding Turning
184	Oil Seal
185	Bearing check - nut
186	Motor housing Cover Top
187	Motor housing Cover Bottom
188	Motor connection plate
189	Motor connection lugs
190	Pump Shaft Sleeve S/S
191	Pump Shaft S/S (New)
192	Pump Shaft Balance
193	Pump Impeller
194	Impeller Neck Ring
195	Impeller Balance
196	Impeller diffuser
197	Oil seal & Mechanical Seal
198	Coupling Bush
199	Repairing work for 30 HP Centrifugal Motor Pump set:
200	Supply of Following spares for above pumpset:
201	Motor Cooling Fan
202	Rotter Balancing
203	Best Quality grease AP 3
204	Bearing Cap
205	Motor Top bearing
206	Motor Bottom bearing
207	Motor top and bottom Shaft Welding Turning
208	Oil Seal
209	Bearing check - nut
210	Motor housing Cover Top
211	Motor housing Cover Bottom
212	Motor connection plate
213	Motor connection lugs
214	Pump Shaft Sleeve S/S
215	Pump Shaft S/S (New)
216	Pump Shaft Balance
217	Pump Impeller
218	Impeller Neck Ring
219	Impeller Balance
220	Impeller diffuser
221	Oil seal & Mechanical Seal
222	Coupling Bush
223	Repairing work for 40 HP Centrifugal Motor Pump set:
224	Supply of Following spares for above pumpset:
225	Motor Cooling Fan
226	Rotter Balancing
227	Best Quality grease AP 3
228	Bearing Cap
229	Motor Top bearing
230	Motor Bottom bearing
231	Motor top and bottom Shaft Welding Turning
232	Oil Seal
233	Bearing check - nut
234	Motor housing Cover Top
235	Motor housing Cover Bottom
236	Motor connection plate
237	Motor connection lugs
238	Pump Shaft Sleeve S/S
239	Pump Shaft S/S (New)
240	Pump Shaft Balance
241	Pump Impeller
242	Impeller Neck Ring
243	Impeller Balance
244	Impeller diffuser
245	Oil seal & Mechanical Seal
246	Coupling Bush
247	Repairing of 60 HP V.T Pumpset
248	Removing and Dismaintling of 60 HP V.T pump set with allied equipments etc complete
249	Repairing of vertical Turbine pump with turning, grinding and polishing of bowl assembly and required spares with skilled labour charges etc. complete
250	Supply of Following spares for above pumpset
251	Stuffing box bushing bronze
252	Gland sleeve S.S.
253	Rubber Bush
254	Ratchet as per sample
255	Neck ring bronze
256	Bowl bush
257	Bowl turning and surface counter and top
258	Impeller
259	Impeller collect
260	Impeller turning
261	Impeller balancing
262	Top shaft S.S
263	Column pipe EN - 8
264	Column shaft
265	Shaft sleeve
266	Special strengthen Heavy Duty nut bolts for total pump set
267	Rubber Packing
268	Pump Foundation plate surfacing and Finishing etc. complete
269	Column pipe repair with welding of ribs to MS Flange with machining etc
270	coupling Socket
271	Spyder
272	Spyder rubber
273	Pump Shaft
274	Complete servicing of 60 HP V.T motor with checking insulation winding, varnishing and rotor balancing etc complete .
275	Transportation of V.T Pumpset with loading and unloading by crane with too and from site etc complete
276	Erection and assembling of 60 HP V.T Pumpset with bowl assembly, discharge head, coloumn pipe, line shaft with allied equipments etc complete .
277	Repairing of 60 HP Motor:
278	Removing and Dismaintling of 60 HP VHS type Motor with allied equipments etc complete
279	Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work .
280	Supply of Following spares for above pumpset
281	Rotor balancing
282	Cooling fan
283	best quality grease Ap3
284	140 No. bearing oil
285	Motor top bearing
286	Motor bottom bearing
287	Motor bottom / top Shaft welding turning
288	Oil seal
289	Motor lock ratchet check lock key complete bushing S.S & etc.
290	Brass pipe & Nipple etc complete
291	Terminal
292	Brass Lugs
293	Motor housing cover top
294	Motor housing cover bottom
295	Bearing checknut
296	Cerclip
297	bearing Cap
298	Transportation of motor with loading and unloading by crane with too and fromsite etc complete
299	Erection and assembling of 60 HP VHS type motor with allied equipments etc complete .
300	Supplying & erecting DOL starter:
301	7.5 H.P.
302	Supplying & erecting Star Delta Starter:
303	20 H.P.
304	15 H.P
305	Supplying & erecting HRC fuse cartridge 415V:
306	60 Amp
307	80 Amp
308	100 Amp
309	125 Amp
310	150 Amp
311	200 Amp
312	Supplying & replacing timer for STAR/DELTA motor starter:
313	GIC Stardelta Timer
314	GIC Timer SM-301
315	Select 800SD
316	Time Switch Timer
317	Supplying and replacing thermal over load relay for motor starter:
318	Relay Range 4 to 6 Amp
319	Relay Range 9 to 14 Amp
320	Relay Range 13 to 21 Amp
321	Relay Range 45 to 75 Amp
322	Supplying & erecting four pole ON LOAD change over switch, 415V, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3:
323	25 AMP 415 Volt mark
324	32 AMP 415 Volt ISI mark
325	40 AMP 415 Volt ISI mark
326	63 AMP 415 Volt ISI mark
327	125 AMP 415 Volt ISI mark
328	200 AMP 415 Volt ISI mark
329	Repairing of motor starter (Rate quoted per HP of pump) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Maharashtra Tenders

Services Tenders

Mechanical Engineering Services Tenders

Electromechanical Services Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27), Jalgaon-Maharashtra

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Water Supply Deppt. (Annual Rate Maintenance Contract For Electrical And Mechanical Works) (2026-27), Jalgaon-Maharashtra

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us