|
| 1 | As per Schedule \\"B\\" |
| 2 | Design, manufacturing & supply of 3Ton JIB CRANE AS PER TECHNICAL SPECIFICATION (Pillar Mounted JIB CRANE ) |
| 3 | ERECTION AND COMMISSIONING OF 3 TON JIB CRANE |
| 4 | Electric Operated Circular or Rectangular Travelling Crane (Single Girder) Providing, erecting and commissioning single girder Electrically Operated Rectangular Over head travelling crane with 6m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54,control panel and down pendant control block 3 Ton capacity (Above 6 m up to 8 m span) |
| 5 | Providing, erecting coated tin shed above the EOT structure with Fabricated MS pipe, angle, MS bars and hardware with redoxide paint with two coat and anti rusting paint with one coat etc complete. |
| 6 | Dismantling existing civil structure and repairs of wall and brick work with plastering for erection of Rolling shutter of size 8 Feet by 6 feet as per requirment. |
| 7 | Supplying erecting rolling shutter with gears and handle arrangement for removing motor and pump equipment through EOT . |
| 8 | Providing erecting , RCC Foundation for erection of pillar for EOT structure including excavation , concreting and plastering etc complete |
| 9 | Providing erecting LT panel for EOT incoming supplying and lighting arrangement for EOT shed. |
| 10 | Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer. |
| 11 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 12 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 13 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 14 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 15 | Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Please Enable Macros to View BoQ information |
