Name of Work:- RENEWAL OF PADARI CHHIT UR SHAKTESHGARH WITH HOT MIX PLANT IN KM-1,2,3,4,5,6(500),7,8,9,10,,16(300),17,18
Sl. No.
Item Description
1
Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder V.G. 30 @ 4.50 .per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. Grade II
2
Providing and applying Tack coat with bitumen Pressure distributor at the rate of 0.20 kg per sqm with Bitumen VG-10 on the prepared granular /bituminous surface cleaned with mechanical broom befor BC
3
Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binderVG30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects Grade II
4
Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades.
5
Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade.
6
Providing & Laying of Hot Applied Thermoplastic compound 2.5 mm thick including reflectoring glass beads at 250 grma per Sqm Area thickness of 2.5 mm is exclusive of surface applied glass Beads as per IRC . 35.2015 the finished surface to revable unifrom and free from streaks and holes. MORTH Specification no. 803 (8:13) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
