Tender For Providing Lwss Kangain To Thambu And Its Adjoining Villages (Under Jjm) In Tehsil Pal Ur & Jaisinghpur Distt. Kangra (Hp) (Sh: - Making Connections Of Various Distribution Pipe Lines With Newly Constructed Over Head Tank At Daroh Kaswa), Kangra-Himachal Pradesh
TDR : 54868337
Tender Notice
BOQ
11 Days Left
Kangra
Himachal Pradesh
Tender For Providing Lwss Kangain To Thambu And Its Adjoining Villages (Under Jjm) In Tehsil Pal Ur & Jaisinghpur Distt. Kangra (Hp) (Sh: - Making Connections Of Various Distribution Pipe Lines With Newly Constructed Over Head Tank At Daroh Kaswa)
Name of Work:- Providing LWSS Kangain to Thambu and its adjoining villages (Under JJM) in Tehsil Pal ur & Jaisinghpur Distt. Kangra (HP) (SH: - Making connections of various distribution pipe lines with newly constructed over head tank at Daroh Kaswa)
Sl. No.
Item Description
1
Excavation in foundation trenches etc. in earth work lift up to 1.50 mtrs stacking the excavated soil not more than 3 mtrs clear from the edge of excavation and than returing the stacked soil in 15cm layers when required into plinth sides of foundation etc consoildating each deposited layer by ramming and watering and then disposing of all surplus excavated earth directed within all leads & lifts in Pick work 20m and Jumper work in all leads and lifts as per the direction of Engineer in Charge.
2
Laying in trenches G.M.S tubes fitting complete (cost of earth work paid separately) of following dia and class complete as per the direction of Engineer-in-Charge with in all leads and lifts.
3
50 mm dia (L/C)
4
32 mm dia (L/C)
5
Laying, Jointing with circumfrential butt welded joints by electrical arc welding (welding thicknes shall be equal to pipe wall thickness) steel flanged pipes after every 30 mtr of pipe of following diameter confirming ot IS 1239-1990 (Part-II) having wall thickness as specified below capable of with standing required test pressure, including manufacturing and febrication of reducers/ tapers, all short piece etc as per site requirement made from parent tubes. The laying pipe shall also include flanged joints duly welded in three layers (Two inner & one outer) where ever required as per direction of the Engineer in Charge (Earth work in trenches and the cost of providing flanges i/c nut and bolts, gasket will be measured and paid for separately) and all operation such as cutting, welding, jointing, fabrication of tees i.e. lowering and laying in excavated trench to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of Engineer in Charge. the welding electrodes shall be as per IS 814 of Advani Oerlikon/L& T or ISI marked make. The damaged portion of the pipes and all the specials (if damaged during laying & jointing operation of pipe) made form the parent tube shall be provided anti-corrosive treatment by applying two coats of anti-corrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing, welded joints with in all leads and lifts as per the direction of Engineer in Charge.
6
100MM dia Table-5
7
80MM dia Table-5
8
providing and fixing MS flange confirming IS 6392-1971 with up to date ammendment welding both side of flanges according to relevent standard with nuts and bolts with rubber sheet washer confirming to IS 1367-1961 to the carriage of material with in all leads and lifts as per direction and to the entire satisfaction of Engineer in charge .
9
100 mm diaTable-5
10
50 mm dia Table-5
11
Manufacturing of GI Tee of variuos dia with circumferntial butt welding complete in all respect as per the direction of Engineer in charge with in all lead and lifts
12
80x80 mm dia
13
100x50 mm dia
14
80x50 mm dia
15
80x32 mm dia
16
Manufacturing of GI Bends of variuos dia with circumferntial butt welding complete in all respect as per the direction of Engineer in charge with in all lead and lifts
17
100 mm dia
18
80 mm dia
19
Supplying and fixing of Cast iron sluice valve ( with hand wheel) conforming to BIS 14846 ( Latest with upto date ammendments) class -PN1.00 of 10.20 Kg/cm² of of Kirloskar/Leader/ Kartar/Bir make of dia i/c brass spindle as per IS 2906 class-II complete (The cost of M.S.flanges to be measured and paid for separately) as per the entire satisfaction of Engineer-in-charge with in all leads and lifts.
20
100 mm dia
21
80 mm dia
22
Providing and Fixing of GI Peet valve of various dia complete in all respect as per the direction of Engineer in charge with in all lead and lifts
23
32 mm dia
24
50 mm dia
25
Providing and Fixing of GI Union of various dia complete in all respect as per the direction of Engineer in charge with in all lead and lifts
26
50mm dia
27
32mm dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
