|
| 1 | Part - A (Civil work) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR 15.56 ) |
| 3 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) DSR 13.7.2 |
| 4 | Dismantling and Re-fixing Animal Sikanja from one place to another place embedded in cement concrete blocks at required place and height, complete in all respect to the entire satisfaction of the engineer in charge .(N.S) |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below DSR 15.12.1 |
| 6 | Providing 40/70 mm thick PUF insulated roof panel with 0.50mm thick corrugated profile sheets with from outside and micro ribbed 0.50 mm thick PPGI inside with FR grade PUF density 42 Kg/m3 + 5% with proper overlapping and projection on all sides roofing up to any pitch and fixing with self drilling fastener,flashing screw and silicon sealant etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required complete in all respect and to the entire satisfaction of the Engineer-in-charge . N.S |
| 7 | Providing and fixing 24 inch Throat dia (685mm) stainless steel -201 rotating wind driven turbo ventilator having 360mm height Top cover, fins ,Outer Rings and drive mechanism with shaft and bush bearing on shed complete in all respect to the entire satisfaction of engineer incharge. N.S |
| 8 | Providing & Fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as aproved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns sheet should have protective guard film of 25 microns minimum to avoid scrateches during transportaition and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm ) with EPDM seal, complete upto any pitch in horizontal/vertical or cureved surfaces, excluding the cost of publins, rafters and trusses and includng cutting to size and shape wherever required (N.S.) |
| 9 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade.Area of slab over 0.50 sqm. DSR 8.2.2.2 |
| 10 | Providing and fixing 1st quality ceramic glazed wall tile confirming to IS: 15650.75 (thickness to be specified by the manufacture of approved make in all colours shade except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (: 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including painting in white cement mixed with pigment of matching shade complete in all respect to the entire satisfaction of the Engineer-In-Charge. Size 600x1200mm |
| 11 | Providing and fixing Waterproof Chikh ( Bamboo Strips Curtain) coverings with approved Rolling / Folding System Pattern on existing Window Jali all complete as per direction of Engineer-in-charge. (N.S) |
| 12 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding of disposed earth to be leveled and neatly dresses DSR 2.6.1-2.36 |
| 13 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over 20mm thick compacted bed of cement sand mortar 1:4 including grouting the joints with cement mortar etc. all complete as per the direction of Engineer-in-charge. |
| 14 | Providing and Laying of kerb of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes fixing in position at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. |
| 15 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.(DSR : 15.26) |
| 16 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead.(DSR : 15.27 |
| 17 | Painting top roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60cudm per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete (with residual type petroleum bitumen of penetration VG-10 bulk to the entire satisfaction of the E.I.C.DSR 12.15.1 |
| 18 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat : With common burnt clay F.P.S.(non modular) brick tile of class designation 10 DSR 12.16.1 |
| 19 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: (DSR.10.14.3) (a) Profile E (DSR 10.14.3.1) Fixing with adjustable lugs with split end tail to each jamb |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9.2) Kiln seasoned and chemically treated hollock wood (DSR 9.9.2.1) 35 mm thick |
| 21 | Applying priming coat :(DSR 13.50) With ready mixed pink grey primer of approved brand and manufacture on wood work (hard and soft wood) DSR 13.50. |
| 22 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (DSR 10.30.1) |
| 23 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of Asbestos cement sheet DSR 15.28.2 |
| 24 | Providing corrugated Aesbestos Cement sheet roofing 6 mm thick fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 25 | Providing and fixing ISI marked flush door shutters conforming to IS :2200 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21.1) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 26 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick DSR 9.127.2 |
| 27 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). DSR 9.23 |
| 28 | Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows including ISI marked bright finished or/and black enamelled M.S. butt hinges with necessary screws: Kiln seasoned and chemically treated Hollock wood. DSR 9.27.2 |
| 29 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. DSR 9.83 : |
| 30 | Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In grating, frames, guard bar, ladder, railings, (10.25.2) |
| 31 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Coarse sand. (DSR : 6.1.1) |
| 32 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR : 6.4.1) |
| 33 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: ( 1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). |
| 34 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.1.2 |
| 35 | Providing and fixing 1st quality ceramic glazed wall tile confirming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours shade except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (: 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including painting in white cement mixed with pigment of matching shade complete in all respect to the entire satisfaction of the Engineer-In-Charge. Size 600x1200mm |
| 36 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine sand) : Raised and cut pointing DSR 13.31.2 |
| 37 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) (DSR 13.5.1) 1:4 (1 cement: 4 fine sand) |
| 38 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete DSR 5.9.1 |
| 39 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6 |
| 40 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR 5.9.5 |
| 41 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge for the following grades of concrete.All works above plinth level upto floor V level.Concrete of M25 grade with minimum cement content of 330 kg/cum.DSR 5.33.2.1 Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. |
| 42 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR 5.22A.6 |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. (DSR 14.54.1.) |
| 44 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) DSR 13.90.1 |
| 45 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (DSR 13.46.1) |
| 46 | Demolishing brick work manually/by mechanical means including Credit of old bricks within 50 metres lead as per direction of Engineer-in-charge. In Cement mortar (Based on DSR 15.7.4) |
| 47 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.DSR 2.27 |
| 48 | P/F 2\\" dia 4'-3\\" high G.I pipe heavy duty) railing having vertical members to be fixed 7'-0\\" centre to centre. The horizontal/vertical members of railing are to be connected by means of 2\\" G.I. elbow. Vertical members of railing are to be embedded in ground upto 9\\" depth and to be fixed in cement concrete blocks of size 1'x1'x9\\" (cement concrete 1:2:4) It further includes iron hold fasts 9\\" long of MS flat or section 50x12mm to be welded at the bottom of vertical members complete in all respect to the entire satisfaction of the E.I.C. |
| 49 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase (DSR : 12.21.1) |
| 50 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx 1mx 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete. DSR 12.22 |
| 51 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 52 | Providing and fixing Fencing with Barbed wire 12 X 12 ply hot dipped confirming to IS 278-1978 type B and Designation (wt 125gm/Rmt) on Existing Angle embedded in cement concrete blocks at required distance, complete in all respect to the entire satisfaction of the engineer in charge.Payment to be made per metre cost of total length of barbed wire used. |
| 53 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) DSR 16.53 |
| 54 | Providing and fixing Cow with Calf on Front Main Gate shall be of Mild steel, Smooth finish having Required sizes cutting with CNC technique fixed with the help of welding having fixing arrangements placed on existing iron gate projected from front face including painting of Cow and Calf complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 55 | Providing and fixing of Municipal Corporation circular logo size having front of sheet with mirror effect with blue and white combination , sides of smooth finish and back of mild steel with two coats of paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 56 | Rubber Cow Mat 8x5 Ft – 30mm Thick Waterproof & Anti-Slip Mat for Cows, Horses, Buffalo – Heavy-Duty BPA-Free Feeding Floor Mat complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 57 | Part - B (Public Health work) |
| 58 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 1 00 mm sand cast Iron P or S trap, 1 0 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 59 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 1 0 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231 , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 60 | roviding and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm |
| 61 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia (DSR 17.28.2.2) |
| 62 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 (DSR 17.35.1.1) |
| 63 | Providing and fixing soil, waste and vent pipes :75 mm dia Sand cast iron S&S pipe as per IS: 1 729 |
| 64 | Providing and fixing collar : 1 00 mm . Sand cast iron S&S as per IS - 1 729 |
| 65 | Providing and fixing collar : 75 mm Sand cast iron S&S as per IS - 1 729 |
| 66 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes 100 mm dia pipe (17.36.2) |
| 67 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729 (DSR 17.38.1.1) |
| 68 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore (DSR 18.11.1) |
| 69 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore (DSR 18.12.2) |
| 70 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia nominal bore DSR 18.10.3 |
| 71 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 50 mm dia nominal bore DSR 18.10.6 |
| 72 | P/F C.P. long brass bib cock of approved quality conforming to ISstandards and weighing not less than 810 gms -15 mm nominal bore. 18.50.1 |
| 73 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore (DSR 18.46.1) |
| 74 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20 mm nominal bore (DSR 18.46.2) |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 76 | Providing and fixing hi flow water filter-cum-purifier/ R.O having minimum capacity 7 ltr including installation charges of make livpure/aquaguard//kent/pure-it. complete in all respect to the entire satsfaction of Engineer-in charge. N.S |
| 77 | P/F C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. Item Code: 18.49.1 |
| 78 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks (DSR 18.76.1) |
| 79 | P/F wash basin with all fittings White vitreous china Wash basin 630x450mm with a pair of 15mm CP brass pillar taps Item Code: 17.7.1 |
| 80 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(DSR 17.16A) |
| 81 | Providing and fixing of Spreader for Urinal complete in all respect as per the satisfaction of engineer in Charge. |
| 82 | P/F C.P. brass angle valve for basin mixer and geyser points- conforming to IS:8931 a) 15 mm nominal bore DSR 18.53.1 |
| 83 | Providing and fixing of Flush valve with washer spring lock, upper flange, sleeve push button. Make Jaguar in place of low level cistern |
| 84 | P/F C.P. brass long body bib cock of approved quality conforming to ISstandards and weighing not less than 690 gms. 15 mm nominal bore. Item Code: 18.51.1 |
| 85 | P/F C.P. brass stop cock of approved quality conforming to IS:8931 15 mm nominal bore. Item Code: 18.52.1 |
| 86 | Providing and fixing PTMT liquid soap container 1 09 mm wide, 1 25 mm high and 1 1 2 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 1 05 gms. |
| 87 | Providing and fixing toilet paper holder : C.P. brass |
| 88 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 1 00x1 00 mm size P type 1 9.4.1 .1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 89 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1 :4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x61 0 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 1 5 kg), R.C.C. top slab with 1 :1 .5:3 mix (1 cement : 1 .5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1 :5:1 0 (1 cement : 5 fine sand : 1 0 graded stone aggregate 40 mm nominal size), inside plastering 1 2 mm thick with cement mortar 1 :3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x61 0 mm and 45 cm deep for single pipe line : 1 9.30.1 .1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 90 | Providing and Fixing RCC Road Gullies Cover and frame complete in all respect as per the satisfaction of engineer in charge |
| 91 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1 :1 (1 cement : 1 fine sand) including testing of joints etc. complete. 300 mm diameter |
| 92 | Providing and laying cement concrete 1 :5:1 0 (1 cement : 5 coarse sand : 1 0 graded stone aggregate 40 mm nominal size) upto haunchs S.W. pipes including bed concrete as per standard design (c&d) 300 mm dia SW pipe |
| 93 | Part - C (Electrical work) |
| 94 | S/E of Ceiling Fans 1200mm sweep without fan regulator including M.S. pipe as per site requirement and wiring complete in all respect Make Havell's/ Bajaj/ Crompton/ Panasonic including making connection with 23/.076' flexible wire to be adjacent fan point with regulator. The work shall be executed to the entire satisfaction of Engineer in charge. |
| 95 | Supply & Erection of Exhaust Fan haevy duty(14” sweep (300mm) 900 RPM of Panasonic (Anmol 13160) Havell’s/ Bajaj/ Crompton make complete with motor blades along with louver to be installed on existing hole in wall/ glazing with suitable arrangement. The rate includes cost of all labour, carriage to site, testing, commissioning of Exhaust fan & connection to existing light panel. The job shall be executed to the entire satisfaction of Engineer-in-charge. |
| 96 | S/E of wall fans 400mm sweep without fan regulator of Panasonic- Flora Neo/Havell's/ Usha/ Bajaj/ Orient make including fan hook making connection with 23/076 flexible wire to be adjacent fan point. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 97 | Point wiring in PVC conduit, with modular type switch: Wiring for light point/fan point/exhaust fan point/ cal bell point with 1.5 sq.mm FR PVC insulted copper conductor single core cable in surface/ recessed PVC Conduit with modular switch, modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. Group-C |
| 98 | Supply & Erection of 1x18/20 watt retrofit LED tube rod Supply & Erection of 1x18 watt retrofit LED tube rod made of aluminium housing with PC diffuser or its equivalent specification Lumen out put should be more than 100 lumens per watt (1800 LUM) with LM 79 report from NABL. The make of the fittings should be Panasonic/ Phillips/ Wipro/ Osram/ Surya/ Twinkle. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 99 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. Group-C |
| 100 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire |
| 101 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 102 | PVCCON S/F PVC Conduit:Supplying & Fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. The work shall be executed to the entire satisfaction of Engineer in charge. (25mm) |
| 103 | 32 mm |
| 104 | S/F’C series, DP MCB Supply and fixing 6 amps to 32 amps rating, 240 volts ‘C’ series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB Complete with connections testing and commissioning etc as required. Double pole 16 Amps “C” series Make of Anchor, Havells, Legrand, ABB, Siemens, L&T. The work shall be executed to the entire satisfaction of Engineer in charge. |
| 105 | Supply& Erection of PVC insulated 2 core 10mm2 aluminium conductor twin core flat of Rolex/ Sunhome/ Polycab/ Shalimar/ Havell's.The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 106 | Supply and Erection of bakelite sheet of 3mm with cutting & making good etc. on the existing M.S. boxes with suitable size of screws & washers etc. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 107 | Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. The work shall be executed to the entire satisfaction of Engineer in charge. |
| 108 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 109 | Supply & laying of ISI marked 4 core 16 mm sq PVC Insulated Aluminium armoured cable loose in trench/pipe:-Supply & laying of ISI marked 4 core 16 mm sq PVC Insulated Aluminum conductor armoured cable of make Havells/ Finolex/ Ecko/ Lapp/ Sunhome/ Polycab/ KEI/ Panasonic conforming IS:1554 (Pt.1) amended. The cable to be laid in trench/ pipe as per DSR Code 7.5.1/2018 MV CB PIP-25 Part-II (External). Material Testing report to be submitted and material to be supplied at site after confirmation from Engineer-in-charge. The specification of the cable as below:- i) Conductor – Aluminumii) Core – 4iii) Working Voltage – 1100 Viv) Nominal Cross Section – 16mm2 v) Minimum No. of Wire – 7/6vi) Insulation Thickness – 1.0mm (Nominal)vii) Inner Sheath Minimum Thickness – 0.3mm viii) Outer Sheath Minimum Thickness – 1.40mmix) Nominal size of Armoured Wire/Strip – 4x0.8mmx) Approximate O.D. – 22mmMaximum d.c. Resistance at 20 Deg. C – 1.91 ohm/kmThe work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 110 | Supply & Laying of DWC pipe 51/63mm without hand bockey:- Supply and Laying of pipe (OD-63 mm & ID-51 mm nominal) Double Wall Corrugated (DWC) Without Hand Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, anti rodent, inflammable & good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930, complete with fitting and cutting, jointing etc. direct in ground (depth as per the direction of Engineer in charge and upto 75 cm below ground level) including excavation and refilling of digging including sand cushioning and protective covering etc., complete as required and PSEN-50086 (P-I & II) of Make Gemini, Zen, Duraline, Crescent, Sunrise. The entire satisfaction of Engineer-in-Charge of work. Please Enable Macros to View BoQ information |
