|
| 1 | PART – A (Work Portion) |
| 2 | ITEM No. 1 :- SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45+2 kg/m, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustments Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5+0.Scm range)- Arm top swivel adjustment- 2 position, 12+2 swivel inside Arm top width adjustment - Any position (2.0+0.Scm range each arm top) Arm top To - Fro Adjustment- any position (4.0+0.Scm range) Armrest top is made up of high density PU molded over glass filled Poly-amide inner.POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: 360 revolving type. Forward tilt of sesat and back. Upright tilt lock. Tilt tension adjustment can be operated in seating position. 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0+0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0+0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with Snos. twin wheel castor. The pedestal is 67.0 + 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5+0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 - 132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0 |
| 3 | ITEM No. 2 :- POSTURE PERFECT VISITOR : SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide.Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45+2 kg/m*, and hardness load 16 + 2 kgf as per IS:7888 for 25% compression. *Seat SIZE: 45.5cm. (D) x 52.4cm. (W) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. *HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) ARMRESTS: The armrest having four range of adjustment Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5+0.Scm range) Arm top swivel adjustment- 2 position, 12+2 swivel inside Arm top width adjustment - Any position (2.0+0.Scm range each arm top) Arm top To - Fro Adjustment- any position (4.0+0.Scm range)- Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: 360 revolving type. Forward tilt of sesat and back. - Upright tilt lock. Tilt tension adjustment can be operated in seating position. 3- position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0+0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5+0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0+0.3 cm PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with Snos. twin wheel castor. The pedestal is 67.0 + 0.5cm pitch-centerdia.TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5+0.1cm wheel Diameter and assembled to pedestal. WIDTH (W): 74.0 CM. DEPTH (D): 74.0 CM. HEIGHT (H): 112.0 -132.5 CM. SEAT HEIGHT (SH): 44.5 - 58.0 CM. As per Quotation |
| 4 | ITEM No. 3 :- Bamboowood 12mm thick Wall Cladding including Threshold & T-mold for Accoustic purpose : Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, 1900mm length (minimum) and 135mm wide approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC) with necessary profiled edges fixed with BR nails to frame work made of second class teak wood of size 50 x 50 mm in centre and ends of each tile. The bamboowood cladding shall be laid over glass wool of 50mm thickness filled in between two teak wood frame and hold in place by 50mm thick teak wood placed centre of two teak wood and covered with mesh (rabbit) fixed to teak woodframe work with wire nails as backlayment and covered with 1.00mm thick expanded poly ethylene foam of density 25Kilogram/cum in two layers first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The Bamboowood planks shall have minimum density of 1000 Kilogram/cum & minimum Hardness 1000 Kilogramf. with Eco friendly UV coating, all complete as per direction of As per Quotation |
| 5 | ITEM No. 4 :- Providing supplying and fixing Acrylic/oil colorspentings On Canvas.Providing art work should have been created on the winsor and Newton cotton canvas and the canvas should be of 10. OZ thickness the texture of canvas should be fine grain and oil / Acrylic colours used to create the artwork are from the winsor and Newton linseed oil and liquin to apply and mixing for oil colours, after finishing the artwork a coat of varnish should be applied On the artwork the wooden stretcher required for the artwork is made up ofpine wood planks 1.5 Inch by 1.5 inch thickness. Fibre frame should be applied for exterior decoration of the Art Work. Art work should be supplied On the location and displayed the wall as per requirement and instructions. As per Sanctioned Rate |
| 6 | ITEM No. 5 :- SUPPLYING & FIXING HIGH RELIEF FRPsculpture / mural on the wall. A)first Creat the Shadow soil model according to the size and drawing. B)Production should bemade from dove craving rubble molds for FRP casting. C)FRP material 150 gelcoat MSlubrication bonding with oven matte colour D)Work should be done in polyurehane spray colour matte/metallic stone culour for Indoor and outdoor sculpture and mural E)Work should be done with the lacquer and sun coat spray As per Sanctioned Rate |
| 7 | ITEM No. 6 :- Clean the wall: to remove any dirt or debris. Repair holes and cracks: in the wall surface. Sand the wall: to create a smooth, even surface for painting. Wipe away any sanding residue: with a dry cloth. Apply a coat of acrylic primer: to the entire wall to ensure good paint adhesion and coverage. painting will be created on a given topic and colored with acrylic colors. As per Sanctioned Rate |
| 8 | ITEM No. 7 :- A) SUPPLYING, PROVDING AND FIXING SS BOX LETTERS Material:SS 304 grade 0.8 thickness.Letters/alphabet cutting in laser sorce.1 inch molding surrounded to alphabet.5mm nut brezing inside the molding on sufficient distance for letters feeting.Fullthrade SS road as per size of nuts for feeting on wall / background surface for Installation. B)SUPPLING AND FIXING FOLLOWING MATERIAL-SS 1.5 Mm Thickness. A)Chemical Etching (engraving) For Design & Matter (0.02mm) Deep Etching. B)Stowing Paint feel in to design and matter as per colour choice. C)After feeling colour heating processed for 1hr. D)epoxy gloss lamination on surface of product end to end (1mm thik). E)3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation & Installation At site. SUPPLING AND FIXING FOLLOWING MATERIAL-Material: Brass 1.5 Mm Thickness for PREAMBL. A)Chemical Etching (engraving) For Design & Matter (0.02mm) Deep Etching. B)Stowing Paint feel in to design and matter as per colour choice. C)After feeling colour heating processed for 1hr. D)epoxy gloss lamination on surface of product end to end (1mm thik). E)3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation & Installation At site. |
| 9 | ITEM No. 8 :- SUPPLING AND FIXING FOLLOWING MATERIAL- Material: Brass 1.5 Mm Thickness for PREAMBL A)Chemical Etching (engraving) For Design & Matter (0.02mm) Deep Etching B)Stowing Paint feel in to design and matter as per colour choice C)After feeling colour heating processed for 1hr D)epoxy gloss lamination on surface of product end to end (1mm thik) E)3 inch x 1 inch wooden frame surrounding to the product with wood polish and Wall hanging Clips on the Background f) Transportation & Installation At site As per Sanctioned Rate |
| 10 | ITEM No. 9 :-SUPPLYING & FIXING HIGH RELIEF FRP sculpture/mural on the wall. A) first Creat the Shadow soil model according to the size and drawing. B)Production should be made from dove craving rubble molds for FRP casting. C)FRP material 150 gelcoat MS lubrication bonding with oven matte colour D Work should be done in polyurehane spray colour matte/metallic stone culour for Indoor and outdoor sculpture and mural E) Work should be done with the lacquer and sun coat spray As per Sanctioned Rate |
| 11 | ITEM No. 10 :- SUPPLYING & FIXING ACRYLIC 5.MM. For amenities, instruction, safety signage, name plates and room numbers on 5.mm acrylic with vinyl cutting and pasting |
| 12 | ITEM No. 11 :- Providing & fixing of Wooden Grill panel with backer made of natural bamboo with 24mm Face black exposed grid. The Grill panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grill panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71 finished to natural or carbonized shades. The Grill panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional end backers at 150mm from both the edges. The Grill panel shall have a fire performance of Class A according to ASTM-E84. The Grill panel shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%. SUSPENSION: The tile shall be installed on 24 mm wide T - section flanges having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel fixed to the ends. The cross tee to provide double locking between cross tee to cross tee and cross tee to main beam. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All exposed panel ends to be covered using edge caps. All wall angles to be covered using ledgers. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of recommended make. INSTALLATION: To comprise main runner spaced at 1200mm centre to centre securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be. |
| 13 | ITEM No. 12 :- Bamboo Fibre Composite Tiling system with High Traffic bearable coating. Providing & fixing in position Bamboo Fibre Composite Tiling system (Made in India) with planks of size 13.5 mm thick, 1880mm length (minimum) and 131 mm wide (minimum), in colour, texture and finish. The tile shall be fixed with tongue and groove interlocking system, and are to be installed with PVA resin glue with underlayment of 4mm thick expanded polyethylene foam sheets having density 18kg/ cum, over prepared surface. The tiles should be coated with High resistance to traffic Eco friendly UV coating with Hydra based synthetic stains for durability along with necessary accessories, wherever required all complete as per direction of the Engineer in charge. Please Enable Macros to View BoQ information |
