|
| 1 | Supply and fixing of heavy duty Galvanised steel (G.I.) ERW 25mm,1.6mm thick conduit pipe along with all accessories such as bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, cleating with heavy duty GI saddles,chasing chipping or suit to site clamps on RCC wall, column, steel structural, etc. as required under the instruction of Engineer-in-incharge. Surface type junction box shall be provided. |
| 2 | Supply |
| 3 | Installation |
| 4 | Supply of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS 17048: 2018 (latest edition) and as per conductor class 2 of IS: 8130 / 1984 as per technical specification |
| 5 | 1.5 Sq. mm |
| 6 | 2.5 Sq. mm |
| 7 | Installation/drawing through concealled/ surface conduit and wiring and termination at both ends of Single Core HFFR wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS 17048 : 2018. As per conductor class 2 of IS: 8130 / 1984 as per technical specification |
| 8 | 1.5 Sq. mm |
| 9 | 2.5 Sq. mm |
| 10 | Pre-Galvanished sheet steel Distribution box with 1 no. of 6A Single phase Industrial three pin Socket along with Industrial Plug Tops with corresponding Type C-Curve, Industrial type MCBs, Isc=10kA, mounted on suitable DIN rail and as per technical specifications |
| 11 | Supply |
| 12 | Installation on concrete/brick wall |
| 13 | SWITCH AND SOCKET FOR POWER AND LIGHTING Supplying, installing, testing and commissioning of 250 volts single phase and neutral 20 amps switched socket outlet embedded or surface including providing and fixing of 20 amps 5 pin switched sockets of reputed make and design in 1.6 mm thick powder coated GI box with 6 module plates and earthing the third pin of each socket outlet and box, including cost of 2 Switch, 2 Socket and 6 Modular Plate. |
| 14 | Supplying, installing, testing and commissioning of 250 volts 4 Module Switch Board Consists of 4 nos. of 6A Switch with Module plate & sheet metal mounting screws for Light SB (should be supplied as per specified colour) with front plate. For Toilet & Pantry. |
| 15 | Supplying, installing, testing and commissioning of 250 volts 6 Module Switch Board Consists of 4 nos. of 6A Switch with 16A SocketModule plate & sheet metal mounting screws for Light SB (should be supplied as per specified colour) with front plate. For Toilet & Pantry.extra space shall be covered with dummy plate. |
| 16 | Supplying, installing, testing and commissioning of 250 volts 12 Module Switch Board Consists of 10 nos. of 6A Switch With 1 nos. 16A switch Socket Module plate & sheet metal mounting screws for Light SB (should be supplied as per specified colour) with front plate. For Toilet & Pantry. |
| 17 | Supplying, installing, testing and commissioning of 440 volts three phase and neutral 40 amps industrial 4P MCB with socket embedded or surface mounted . Providing and fixing of 40 amps 4 pin switched sockets of approved make and design in 1.0 mm thick GI box with grid plates and earthing the third pin of each socket outlet and box, including cost of Switch Socket and Modular Plate. |
| 18 | Supply and fixing of Outdoor Junction Box Junction Box 100x100x75mm(1.6mm thickness) |
| 19 | Supply and fixing of Outdoor Junction Box 93x93x62mm IP66 for External Light |
| 20 | Supplying ,testing, Commissioning and installing PVC TRUNKING manufactured as per the specifications given in the tender and drawing. The rate shall include supplying & installing all the tray accessories (such as coupler plates, 90 degree bends, Tee joints etc) as described under specifications and the structural steel supports. |
| 21 | 100 mmx 50mm wide (3 mtr length) |
| 22 | 50mmx 50mm wide (3 mtr length) |
| 23 | CABLES AND CABLE TRAYS Supplying & laying of following 1100 volt grade XLPE insulated PVC inner sheathed and FRLS outer sheathed armoured cables as per specification burried underground,in existing trenches, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning.Work includes supply of Clamping material like Cable Ties, GI Flat etc by the contractor. Rates for these shall be included in the quote |
| 24 | 3.5C x 300 sq.mm AXWY |
| 25 | 3.5C x 150 sq. mm AXWY |
| 26 | 4C x 10 sq. mm 2XWY |
| 27 | 4C x 6 sq. mm 2XWY |
| 28 | 4C x 4 sq. mm 2XWY |
| 29 | 4C x 2.5 sq. mm 2XWY |
| 30 | 3C x 2.5 sq. mm 2XWY |
| 31 | 1Cx2.5 sq. mm. Flexible Wire (Green) |
| 32 | 1Cx4 sq. mm. Flexible Wire (Green) |
| 33 | 1Cx6 sq. mm. Flexible Wire (Green) |
| 34 | Supply & Installation of Cable End Terminations for following types & sizes of cables Work includes : * making entry hole in cable gland plate of equipment / panel / motor* providing and fixing cable gland of specified type & PVC hood* providing and fixing copper and Al cable lugs of suitable type (tubular, ring, pin, bottle etc.)* providing & fixing ISI grade insulation tape on cable lead * fixing cable leads to terminals of equipment and tighteningNotes : 1) GI Bolts & Nuts for fixing lugs to equipment terminal shall be provided by contractor where ever necessary at extra cost. |
| 35 | 3.5C x 300 sq .mm AXWY |
| 36 | 3.5C x 150 sq. mm AXWY |
| 37 | 4C x 10 sq. mm 2XWY |
| 38 | 4C x 6 sq. mm 2XWY |
| 39 | 4C x 4 sq. mm 2XWY |
| 40 | 4C x 2.5 sq. mm 2XWY |
| 41 | 3C x 2.5 sq. mm 2XWY |
| 42 | Design, Fabrication, Supply, Unloading, Handling, Installation, Commissioning of Hot Dipped GI Ladder / Perforated cable tray along with coupler plates and G.I Hardware and 2.50 Metre long and rung spacing of 250 mm. of following sizes, suspended from ceiling or fixed vertically on wall / column as per route directed at site, as approved complete as per technical specifications, drawings & relevant standards & site conditions. Hot Dipped Galvanized Perforated (PCT) & Ladder (LCT) Cable Trays of following sizes. |
| 43 | 100mm (W) x 50mm (H) X 1.6 mm (T) PCT |
| 44 | 200mm (W) x 50mm (H) X 2.5mm (T) PCT |
| 45 | 300mm (W) x 75mm (H) X 2.5mm (T) PCT |
| 46 | 300mm (W) x 75mm (H) X 2.5mm (T) LCT |
| 47 | 450mm (W) x 50mm (H) X 2.5mm (T) LCT |
| 48 | 600mm (W) x 50mm (H) X 2.5mm (T) LCT |
| 49 | 900mm (W) x 50mm (H) X 2.5mm (T) LCT |
| 50 | Cable Tray Joint (Readymade or Fabricated) |
| 51 | 100 mm PCT Horizontal Bend |
| 52 | 200mm PCT Horizontal Bend |
| 53 | 300mm PCT Horizontal Bend |
| 54 | 450mm PCT Horizontal Bend |
| 55 | 600mm LCT Horizontal Bend |
| 56 | 900mm LCT Horizontal Bend |
| 57 | 200x300mm PCT Reducer |
| 58 | 300x450mm LCT Reducer |
| 59 | 300x900mm LCT Reducer |
| 60 | 400x600mm LCT Reducer |
| 61 | 600x900mm LCT Reducer |
| 62 | 100x100mm PCT Tee |
| 63 | 100x300mm PCT Tee |
| 64 | 200x200mm PCT Tee |
| 65 | 300x300mm PCT Tee |
| 66 | 100x450mm LCT Tee |
| 67 | 200x450mm LCT Tee |
| 68 | 300x450mm LCT Tee |
| 69 | 450x450mm LCT Tee |
| 70 | 400x600mm LCT Tee |
| 71 | 600x600mm LCT Tee |
| 72 | 600x900mm LCT Tee |
| 73 | 900x600mm LCT Tee |
| 74 | 200x900mm LCT Tee |
| 75 | 300x900mm LCT Tee |
| 76 | 400x900mm LCT Tee |
| 77 | 450x900x450mm LCT Tee |
| 78 | 900x900mm LCT Tee |
| 79 | 600x600mm LCT 4 Way |
| 80 | 600x900mm LCT 4 Way |
| 81 | a) Cable Tray Support ISA 50x50x6mm MS Angle Support, 350mm Long (L)b) ISA 50x50x6mm MS Angle Support, 450mm Long (L)c) ISMC 75x40x5mm MS Channel Support, 650mm Long (L)d) ISMC 75x40x5mm MS Channel Support, 950mm Long (L)e) ISA 50x50x6mm MS Angle Support, 250mm Long (H) f) ISA 50x50x6mm MS Angle Support,350mm Long(V) 200mm Long(H)g) ISA 50x50x6mm MS Angle Support,1000mm Long(V) 200mm Long(H) h) ISA 50x50x6mm MS Angle Support,1000mm Long(V) 250mm Long(H)i) ISMC 75x40x5mm MS Channel Support,1000mm Long(V) 400mm Long(H)j) ISMC 75x40x5mm MS Channel Support,1000mm Long(V) 450mm Long(H)k) ISMC 75x40x5mm MS Channel Support,500mm Long(V) 650mm Long(H) l) ISMC 75x40x5mm MS Channel Support,1000mm Long(V) 550mm Long(H)m) ISMC 75x40x5mm MS Channel Support,1000mm Long(V) 650mm Long(H) |
| 82 | Supply, installation, testing and commissioning of LT Distribution panels. suitable for 415 V, 3 phase, 50 Hz, 4 wires : LDB panel (LDB)-1&2 (H-1240xW-700xD-250mm) Main Incomer:32A 4P MCB 10kA-01 Nos. Sub Incomer:20A DP RCBO,300 mA-03 Nos. Outgoing:10A SP MCB 10kA-18 Nos.,RYB Indicator Light-1 Set., On Off Switch with Indicator-1 Each., NC Contact-1 No., No Contact-2Nos., Auto/Manual Switch-1 No., Time Switch (0-24 hour)-1 No., (SLD attached) |
| 83 | Supply, Assembly, installation, testing and commissioning of LT Distribution panels. suitable for 415 V, 3 phase, 50 Hz, 4 wire.Class-3 EPDB-1,2,3 Panel (H-2275 x W-2900 x D-450mm) RYB Indicator Light with ckt protection , CT 250A/5A CT-2No., Multi Function Meter-2Nos., Volt Meter-2Nos., Busbar 250A TPN CU.36kA-2Nso., Busbar 100A TPN CU 36kA-3Nos., Incomer: 250A 4P MCCB 36kA-03Nos.Sub Incomer: 100A 4P MCCB, 25kA- 04Nos.Outgoing: 40A 4P MCB 10kA-9Nos., 16A DP MCB 10kA-30Nos. |
| 84 | Supply, Assembly, installation, testing and commissioning of LT Distribution panels. suitable for 415 V, 3 phase, 50 Hz, 4 wire.Class-4 NPDB-1,2 Panel (H-2275 x W-3200 x D-450mm) RYB Indicator Light with ckt protection , CT 400A/5A CT-1No., Multi Function Meter-1No., Volt Meter-1No., Busbar 400A TPN CU.36kA-1No., Busbar 125A TPN CU.36kA-4Nos., Incomer: 400A 4P MCCB 36kA-01Nos.Sub Incomer: 125A 4P MCCB,25kA- 04Nos.Outgoing: 40A 4P MCB 10kA-20Nos.,16A DP MCB 10kA-32Nos. |
| 85 | Supply, Assembly, installation, testing and commissioning of LT Distribution panels. suitable for 415 V, 3 phase, 50 Hz, 4 wire.Class-4 NPDB-3,4 Panel (H-2275 x W-2500 x D-450mm)HRC Fuse-4Nos., RYB Indicator Light with ckt protection , CT 250A/5A CT-1No., Multi Function Meter-1No., Volt Meter-1No., Busbar 250A TPN CU.36kA-1No., Busbar 100A TPN CU.36kA-3Nos., Incomer: 250A 4P MCCB 36kA-01Nos.Sub Incomer: 100A 4P MCCB,25kA- 03Nos.Outgoing: 40A 4P MCB 11kA-11Nos.,16A DP MCB 10kA-27Nos. |
| 86 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 12 Way SPN DB (262mm X 417mm) ( (CLASS-1 LDB-1&2)Incomer: 25A DP MCB 10kA-01 No.Outgoing: 6A SP MCB 10kA-10Nos. |
| 87 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 8 Way ETPN DB (412mm X 562mm) (CLASS-3&4 LDB-1)Incomer: 32A 4P MCB 10kA-01Nos.Sub Incomer: 20A DP RCBO, 300mA- 03Nos.Outgoing: 10A SP MCB 10kA-18Nos. |
| 88 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 6 Way ETPN DB (412mm X 492mm) (CLASS-3&4 LDB-2)Incomer: 32A 4P MCB 10kA-01Nos.Sub Incomer: 20A DP RCBO, 300mA- 03Nos.Outgoing: 10A SP MCB 10kA-12Nos. |
| 89 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 8 Way SPN DB (262mm X 347mm) (CLASS-3 SLDB-1,6,9,10,14,16,18,19,20,21,22,23,24) (CLASS-4 SLDB-1,6,9,10,14,16,18,19,20,21,22,23,24)Incomer: 10A DP MCB 10kA-01 No.Outgoing: 6A SP MCB 10kA-4Nos. |
| 90 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 4 Way SPN DB (262mm X 275mm) (CLASS-3 SLDB-2,3,4,5,7,8,11,12,13,15,17, 25,26) (CLASS-4 SLDB-2,3,4,5,7,8,11,12,13,15,17)Incomer: 10A DP MCB 10kA-01 No.Outgoing: 6 A SP MCB 10kA-2Nos. |
| 91 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 6 Way ETPN DB (412mm X 492mm) (CLASS-2 UPDB-1)Incomer: 32A 4P MCB 10kA-01Nos.Sub Incomer: 25A DP RCBO, 300mA- 03Nos.Outgoing: 6A SP MCB 10kA-12Nos. |
| 92 | Supply, Installation, testing and commissioning of the following Double Door, IP43, MCB DB including switch gears with Double Side Cable box for Glanding. 12 Way ETPN DB (412mm X 707mm) (CLASS-2 UPDB-2)Incomer: 40A 4P MCB 10kA-01Nos.Sub Incomer: 40A DP RCBO, 300mA- 03Nos.Outgoing: 6A SP MCB 10kA-30Nos. |
| 93 | Supply, Installation, Testing & Commissioning of Indoor mounting Luminaries & Exhaust Fan with all fixing accessories etc. |
| 94 | 80W LED Mid Bay Light |
| 95 | 10W DC LED Light Fixture |
| 96 | 18W LED Surface Mounted Light |
| 97 | 40W LED Well Glass Light |
| 98 | Mirror Light 5 watt , 230 Volt |
| 99 | 60W Street Light |
| 100 | Ceiling Fan (1200mm) |
| 101 | 250 mm Exhaust Fan |
| 102 | 450 mm Exhaust Fan |
| 103 | 400W Air Circultory Fan |
| 104 | Supply,Installation & Commissioning of 10 mm dia and 1mtrs length solid copper blunt tip Air termination with Base plate (Vertical air terminal with accessories: Providing of Air terminals along with concrete block for fixing at on Terrace with all mounting accessories with Supporting Mast Fabricated from GI pipe of 48 mm dia, 1000mm length providing with all necessary hardware andguide wire for mounting arrangement for the downconductor and complte it's accessories. |
| 105 | Earthing for Panel, DB, ELV & Lightning. Earthing Conductor:Supplying, laying (on cable trays or through pipes provided by others or on walls/ columns or in trench and connecting the following continuous earth conductors. Note: Any joint in the copper earth conductor shall be made by the process of brazing: |
| 106 | Supply & Installation of 40 x 5 mm Cu Earthing Strip ETP Grade Tinned Coated,Class-2 |
| 107 | Supply & Installation of 50 x 5 mm Cu Earthing Strip ETP Grade Tinned Coated, Class-2 |
| 108 | Supply & Installation of 25 x 3 mm Cu Earthing Strip ETP Grade Tinned Coated, Class-2 (From Test Joint to Terrace & Terrace Floor & Over Head Cable Tray) |
| 109 | Supply & Installation of 95 mm Flex. Strandeded Earth Cu. (From Earth Pit to Earth Pit For Lightning Arrestor) |
| 110 | Supply & Installation of Test Joint (Folding Clamp) |
| 111 | Supply & Installation of 100x100x100 mm Brick Pedaestal |
| 112 | 14 SWG Cu. ETP Grade Bare Solid Tinned Cu.Conductor, Class-2 (For HDGI Conduit Pipe) |
| 113 | SUPPLY AND INSTALLATION OF SAFFTY ITEMS. Supply and fixing of Shock Treatment Chart in electrical room, with 3 mm thick wooden frame & glass cover, along with hanging arrangement or to be mounted on a wall as per directions of the Consultant (To be provided in Languages : Hindi & English) |
| 114 | Supply & installation of 415 V DANGER caution board of designated size (6\\"x 6\\"), made of Mild Steel, at least 2 mm thick & painted vitreous enameled white on both sides, & with inscriptions in signal red colour on front side( to be mounted on doors of electric shafts, electric room, etc.)(To be provided in Languages : Hindi & English) |
| 115 | Providing the A2 Colour size print of the Final Plan / SLD duly framed out on Glass for Electrical room |
| 116 | Supply of First Aid Box with accessories, conforming to IS: 2217-1963 and as approved by the Client. (as per St. Johns Ambulance) Please Enable Macros to View BoQ information |
