|
| 1 | Dismantling of wrought iron of mild steel work of any description not otherwise provided. |
| 2 | Dismantling fencing wire mesh chain link fencing etc, any type all as specified and directed |
| 3 | Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,massonery etc . including taking out embedded portion and making good disturbed ground complete all speciified and directed |
| 4 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | S&F in repairs galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs at 75mm spacibg and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) all as specifed and directed. |
| 6 | M&L for cement concrete Type C1 1:3:6 (Using 20mm graded aggregate) in post holes complete all as specified and as directed. |
| 7 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 8 | S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 9 | S&F steel flat iron including necessary drilling hole bolting or reveting etc and similar work complete conforming to Fe -290 Gde E - 165 complete all speciified and directed |
| 10 | M&L, for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all speciified and directed |
| 11 | Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 12cm long and dia complete all speciified and directed |
| 12 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 14 | M&L for PCC 1:3:6 type C1 (20mm graded Agg) as in coping incl necessary formwork etc all as specified and directed |
| 15 | Demolition of brick or stone/boulder masonry built in cement mortar complete all as specified and directed. |
| 16 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 17 | All as per item No16 but except bricks. |
| 18 | Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed. |
| 19 | M & L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and evenwithout extra using cement complete all as specified and directed. |
| 20 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed. |
| 21 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W(Gde E- 250) quality A complete all as specified and directed. |
| 22 | S&F 1mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required all as specified. |
| 23 | M&L for preparing of new steel surfaces and applying two coat of sythetic enamel paint over one coat of red oxide any description ,over 10cm in width or girth complete all as specified and directed. |
| 24 | M&L for preparing of new steel surfaces and two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all speciified and directed |
| 25 | Laboure only Restraining and resecuring including making good of Plain mild steel wire, galvanised chain link fencing including straining and refixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc complete all as specified and directed. |
| 26 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 27 | Demolition of stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar complete all as specified and directed. |
| 28 | M&L for preparation of old decorated surfaces of walls including washing rubbing down and stoping of painted surfaces and applying one coat of cement base paint complete all as specified and directed. |
| 29 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 30 | M&L for PCC type B-0, 1:2:4 (12.5mm graded aggregates) as in floor finish 50 mm thick complete all as specified and directed. |
| 31 | Formwork to plinth beams and similar work for fair finished surfaces of concrete complete all as specified and directed. Please Enable Macros to View BoQ information |
