|
| 1 | Taking down chowkhat or frame without taking of shutter of any description n.exc 1.50 Sqm each, complete all as specified and as directed. |
| 2 | Description all as per Srl item no 01 above but exc 1.50 sqm but n.exc. 4.00 sqm each, complete all as specified and as directed. |
| 3 | Taking down shutter of any description n exc 1 Sqm each, complete all as specified and as directed. |
| 4 | Taking down shutter of any description exc 1 Sqm but n exc 2.00 Sqm each , complete all as specified and as directed. |
| 5 | S&F 2nd class Hard wood plain soild,straight chowkats and frame wrought,framed rebated on soild,rounded or chamfered,put together with pinned at joints, complete all as specified and as directed. |
| 6 | S&F ,30 mm thick , 2nd class softwood plain,framed,pannelled shutters(any number of pannel),with pannel of timber flat on both sides (feather edged),or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, complete all as specified and directed. |
| 7 | S&F 30mm thick factory made flush shutters , solid core construction , with block board core and ply wood face panels commercial type on both sides fixed to chowkhats etc complete all as specified and as directed. |
| 8 | S&F 35mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a), complete all as specified and as directed. |
| 9 | S&F 30mm thick 2nd class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a), complete all as specified and as directed. |
| 10 | S&F sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square exc 0.50 sqm in each panes fixed to steel or wooden window frames, complete all as specified and as directed. |
| 11 | S&F stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples to windows, complete all as specified and as directed. |
| 12 | S&F in repair stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples to windows, complete all as specified and as directed. |
| 13 | S&F, butt hinges, medium weight ,cold rolled mild steel 100mm, complete all as specified and as directed. |
| 14 | S & F butt hinges 75 mm heavy weight cold rolled mild steel, complete all as specified and as directed. |
| 15 | S&F Aluminium alloy,anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Plate 200mm long, complete all as specified and as directed. |
| 16 | S&F Aliminium anodised barrel tower bolts, 100 mm long, complete all as specified and as directed. |
| 17 | S&F Aliminium anodised barrel tower bolts, 150 mm long, complete all as specified and as directed. |
| 18 | Supply & Fix aluminium handle cast type adonised 100mm, complete all as specified and as directed. |
| 19 | Supply & Fix aluminium handle cast type adonised 150mm, complete all as specified and as directed. |
| 20 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 and finished including taking down old plaster, complete all as specified and as directed. |
| 21 | M&L rendering 15mm thick in CM 1:4 on stone masonary surfaces or surfaces other than fair faces of brickwork and finishing fair & smooth without using extra cement including taking down old plaster, complete all as specified and as directed. |
| 22 | M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed. |
| 23 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 24 | M&L for 100mm thick PCC type D-2 (1:4:8) using 40mm graded agg as in sub base, complete all as specified and as directed. |
| 25 | Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (using 20 mm graded aggregate) as in plinth protection/path laid in bays incl finishing the concrete surface even and smooth without using extra cement, complete all as specified and as directed. |
| 26 | M&L PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping incl necessary formwork, weathering, slightly rounded or chamfered angles including demoltion, complete all as specified and as directed. |
| 27 | Demolition of brick work built in cement mortar including all quoins arches pillars etc and removing from site as directed, complete all as specified and as directed. |
| 28 | M & L for Precast cement concrete hollow block type 1:3:6 using 16 mm graded aggregate as per IS 383 complete masonry exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed. |
| 29 | M&L brick work as in half brick thick wall with sub class 'B' brick (old size) straight or curved on plan any radius in CM (1:4), complete all as specified and as directed. |
| 30 | Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 including dismantling old brick or stone masonary, complete all as specified and as directed. |
| 31 | Walling of random rubble, stone masonry uncoursed well bonded bedded uilt in cement mortar (1:6) and pointed flush with surface in contact with earth, complete all as specified and as directed. |
| 32 | M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement, complete all as specified and as directed. |
| 33 | M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangle) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified including 50mm pcc and 15mm thick screed bed in CM 1:4 inclding tiles spacers and dismantling old floor hearth or wall tile as specified & directed by Engr-in-Charge |
| 34 | M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and pointed in white or colour cement to match including 15mm thick mortar bed in CM 1:4 including tiles spacers and dismantling old floor hearth or wall tile as specified & directed by Engr-in-Charge. |
| 35 | M&L vitrified coloured ceramic tiles 10mm thick (square/rectangular) polished area of each tiles n. exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in whited or coloured cememtn to match Light shade tiles. all as specified including 0.50 mm cement concrete and 15mm thick screed bed in CM 1:4 including tiles spacers and dismantling old floor hearth or wall tile as specified & directed by Engr-in-Charge |
| 36 | All as per item No 35 above but as in skirting including 10mm thick in CM 1:4 rendering as in backing coat, complete all as specified and as directed. |
| 37 | S&F in repair pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw as specified incl including dismantling old sheet as specified and directed. |
| 38 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheet, complete all as specified and as directed. |
| 39 | Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work, complete all as specified and as directed. |
| 40 | M&L for second class soft wood (Kail) clean swan timber fixed in scantling, complete all as specified and as directed. |
| 41 | All as per Ser item No 40 above but except timber complete all as specified and directed. (Note : Serviceable timber obtained from ser item No 48 above to be used). |
| 42 | Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed. |
| 43 | S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed. |
| 44 | S&F second class hardwood plain fillets square, rectangular in section exc 3 Sqcm and not exc 6 Sqcm, complete all as specified and as directed. |
| 45 | S & F second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area not exceeding 3 Sq. cm, complete all as specified and as directed. |
| 46 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 47 | M&L for 6 mm thik Plywood, Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 48 | M&L for 6 mm thik Plywood, Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on ceiling, complete all as specified and as directed. |
| 49 | Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed. |
| 50 | M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed. |
| 51 | All as per Ser item No 50 above but except boarding complete all as specified and directed. (Note : Serviceable boarding obtained from ser item No 62 here-in-before to be used). |
| 52 | S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched, complete all as specified and as directed. |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S&F sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames, complete all as specified and as directed. |
| 54 | Taking down Gl water tubing and connections and taken in to schedule of credit for 15mm bore, complete all as specified and as directed. |
| 55 | Taking down Gl water tubing and connections and taken in to schedule of credit for 20mm bore all as directed, complete all as specified and as directed. |
| 56 | S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore, complete all as specified and as directed. |
| 57 | S&F steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 20mm bore, complete all as specified and as directed. . |
| 58 | Dismantling PVC water tanks, 500 liters capacity & removing credit to contractor, complete all as specified and as directed. |
| 59 | Dismantling PVC water tanks. 1000 liters capacity & removing credit to contractor, complete all as specified and as directed. |
| 60 | S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms, complete all as specified and as directed. |
| 61 | S&F rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm- 45gms, complete all as specified and as directed. |
| 62 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 20mm-210gms, complete all as specified and as directed. |
| 63 | S&F bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore fixed in repairs, complete all as specified and as directed. |
| 64 | S&F pillar tap cast copper ally with capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe pipe and fixed with 15mm bore in repairs, complete all as specified and as directed. |
| 65 | S&F angle valves CP screwed down high pressure of fanciy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore in repairs, complete all as specified and as directed. |
| 66 | S & F in repair Vitreous Cliina wash basin with pedastal pattern, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed. |
| 67 | M&L for Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed. |
| 68 | M&L for Vitreous china Wash down water closet (Pedestal pattern), white (excluding fixing bolts, flushing cisternand flush pipe) fixed in repair , complete all as specified and as directed. |
| 69 | S & F Vitreous china urinal, Half Stall type flat back white (minimum), with grating and union for discharge pipe, complete all as specified and as directed. |
| 70 | Supply and fixing in repairs, vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed. |
| 71 | S&F PVC low level Flushing cistern of capacity 10 liters capacity fixed in repairs complete with all fittings, complete all as specified and as directed. |
| 72 | S&F PVC Connection 15 mm bore with PTMT nuts of length 450mm, complete all as specified and as directed. |
| 73 | PVC floor traps plain with gratings incl jointing to waste pipe with solvent cement dia of out let 75mm, complete all as specified and as directed. |
| 74 | S&F in repair PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints and fixed to wall and laid in floor trenches, complete all as specified and as directed. |
| 75 | S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints and fixed to wall and laid in floor trenches, complete all as specified and as directed. |
| 76 | S&F PVC (SWR) bends 75mm dia provided with access door, complete all as specified and as directed. |
| 77 | S&F PVC (SWR) bends 110mm dia provided with access door, complete all as specified and as directed. |
| 78 | S&F fixed in repair stop valve cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes, complete all as specified and as directed. |
| 79 | (a) 15mm bore |
| 80 | (b) 20mm bore |
| 81 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below , Including taking dowon frame or shutter complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 82 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section, Including taking down frame or shutters. (i) Window frame :63x35mm X 1.48 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing(vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 83 | S & F partition wall of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails ,bottom rails and middle rail of size 63.50 mm x38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type )with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided , including taking down partition, compelte all as specified and directed. |
| 84 | M&L Preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer, complete all as specified and as directed. |
| 85 | M&L applying newly plastered surfaces two coat of cement base paint on plastered or unplastered surfaces incl preparation of surfaces over a coat of primer all as spd and directed |
| 86 | Preparation of new wooden surface, not otherwise described over 10cm width or grith applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 87 | Preparation of new painted surfaces of any descriptoin, not otherwise described, over 10cm witdth or girth and applying two coat of synthetic enamel paint on steel ,iron and roof sheet surfaces, complete all as specified and as directed. |
| 88 | Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint , complete all as specified and as directed. |
| 89 | Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 90 | Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint on Roof surfaces and any steel surface, complete all as specified and as directed. |
| 91 | M&L for preparation of new painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic varnish all as specified. Complete all as specified and station policy or directed by engr-in-charge.(Note - Wk will be requisitioned based on wk order and paid as per site and user requirement) |
| 92 | M&L for applying of 3mm thick wall care putty on wall surfaces etc complete all as specified. Complete all as specified station policy/as directed by engr-in-charge.(Note - Wk will be requisitioned based on wk order and paid as per site and user requirement) |
| 93 | S & F in repair Health faucet (CP) with 8 mm dia 1 mtr long flexible tube with wall hook, complete all as specified and as directed. |
| 94 | S&F CP jet spray with flexible tube 1.5 mtr long, complete all as specified and as directed. |
| 95 | S&F in repair 600 x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buillding board or comercial ply wood and fixed to wooden plugs with chromium plated brass & screws and cup washers, complete all as specified and as directed. |
| 96 | S & F Waste fittings 32 mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair, complete all as specified and as directed. |
| 97 | S & F Waste fittings 40 mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repair, complete all as specified and as directed. |
| 98 | Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface, complete all as specified and as directed. |
| 99 | M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- |
| 100 | (a) All as item no.99 above but for One light point controlled by one switch. |
| 101 | (b) All as item no.99 above but for One switch socket combination 5 Amps on independent board. |
| 102 | (c) All as item no.99 above but for One switch socket outlet 5 Amps on same board with other switches. |
| 103 | M&L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor, complete all as specified and as directed. |
| 104 | S & F fixed in repair Switch piano flush type single pole, one way 5/6 Amp, complete all as specified and as directed. |
| 105 | S&F in repair Switch socket combination box type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch, complete all as specified and as directed. |
| 106 | S&F in repair switch socket outlet two in 1 3 Pin, 5 Amp, 230 Volts, complete all as specified and as directed. |
| 107 | S&F in repair Switch socket combination flush type multipurpose 3/5 pin suitable for 15 Amp, complete all as specified and as directed. |
| 108 | S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all as specified and as directed. |
| 109 | Supply and fixing LED lights fitting 1X20 Watt , 4 Feet 220 Volt AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 110 | Supply and fixing LED lights fitting 1X10 Watt, 2 Feet 220 Volt AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 111 | S&F LED Lamp 9 W 'T' type, complete all as specified and as directed. |
| 112 | S&F in repair Lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed. |
| 113 | MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and as directed. |
| 114 | MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and as directed. |
| 115 | MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and as directed. |
| 116 | S & F MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity), complete all as specified and as directed. |
| 117 | S & F MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity),complete all as specified and as directed |
| 118 | Supplying Only PVC flat twin core cable PVC insulated aluminium conductor size 4 sqmm 2 core. |
| 119 | Supplying Only PVC flat twin core cable PVC insulated aluminium conductor size 6 sqmm 2 core. |
| 120 | Supplying and fixing in repair PVC flat twin core cable PVC insulated aluminium conductor size 10 sqmm including taking down. |
| 121 | Supplying and fixing in repair PVC flat twin core cable PVC insulated aluminium conductor size 16 sqmm including taking down. |
| 122 | S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable. |
| 123 | Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials. |
| 124 | Supply only following items complete all as directed by Engr-in-Charge. |
| 125 | (a) Switch piano 5 Amp |
| 126 | (b) Switch piano 15/16 Amp |
| 127 | (c) Angle/ Batten holder |
| 128 | (d) 5 Amps switch socket combination 3/5 pin type along with box. |
| 129 | (e) 15 Amps switch socket combination 3/5 pin type along with box. |
| 130 | (f) Modular switch flush type one way 6 Amp, 230 volts |
| 131 | (g) Modular switch flush type one way 16 Amp, 230 volts |
| 132 | (h) Modular socket 6 Amp 2/3 pin combined 2 module |
| 133 | (i) Modular socket 6 /16 Amp 2/3 pin combined 2 module |
| 134 | (j) Top plug 5 Amp socket complete |
| 135 | (k) Top plug 15 Amp socket complete |
| 136 | (l) Change over 32 Amp socket complete |
| 137 | (j) Insulation tape of size 32/40mm of Red, Yellow, Blue and Black colour |
| 138 | (k) PVC Casing and caping, complete all as specified and as directed. |
| 139 | (l) PVC Conduit pipe 20mm, complete all as specified and as directed. |
| 140 | (m) Supply Only SMD LED panel recess/surface suspended mounting 36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed. |
| 141 | (n) Supply Only round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 142 | (o) Supply Only Wall mounted Fan 400 mm sweep, complete all as specified and as directed. |
| 143 | (q) Supply only 1.5 sqmm cable FRLSH insulated industrial cables, complete all as specified and as directed. |
| 144 | (r) Supply only 2.5 sqmm cable FRLSH insulated industrial cables, complete all as specified and as directed. |
| 145 | (s) MCB single pole 6 Amp, complete all as specified and as directed. |
| 146 | (t) MCB single pole 10 Amp, complete all as specified and as directed. |
| 147 | (w) MCB single pole 16 Amp, complete all as specified and as directed. |
| 148 | (x) MCB single pole 20 Amp, complete all as specified and as directed. |
| 149 | (y)MCB single pole 32 Amp, complete all as specified and as directed. |
| 150 | (z)MCB double pole 40 Amp, complete all as specified and as directed. |
| 151 | (aa) MCB Double pole 63 Amp, complete all as specified and as directed. |
| 152 | (ab) Supply only LED lights fitting 1X20 Watt , 4 Feet 220 Volt AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 153 | (ac) S&F LED Lamp 9 W 'T' type, complete all as specified and as directed. |
| 154 | (ad) Supply only LED Lamp 20 W 'T' type, complete all as specified and as directed. |
| 155 | (ae) Supply only Garden light unique concept LED Bollard in IP 66 to ensure sustainable performance in all sections and aesthetics which keeps the surrounding lively, complete all as specified and as directed. |
| 156 | (af) Supply only Decorative light wall mounting,brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22base, complete all as specified and as directed. |
| 157 | (ag) Supply only LED strip light High brightness IP65 LED strips with uniformity of light required for perfect outdoor application. Model: Flexion AC Rope 144Dstrip 3000/4000/6000K IP 65 50M (50-50 Mtr-02 roll), complete all as specified and as directed. |
| 158 | (ah) Modular 2 module white cover plate |
| 159 | (ai) Modular 3 module white cover plate |
| 160 | (aj) Modular 4 module white cover plate |
| 161 | (ak) Modular 6 module white cover plate |
| 162 | (al) Modular 8 module white cover plate |
| 163 | (am) Modular 12 module white cover plate |
| 164 | (an) Modular swtich flush type two way 6 Amp, 230 volts |
| 165 | (ao) Modular swtich bell push type, 230 volts |
| 166 | (ap) switch piano bell push,230 volts |
| 167 | (aq) Electronic fan regulator flush type on the existing phenolilc laminated sheet etc |
| 168 | Supply only Track light bed side decorative type, complete all as specified and as directed. |
| 169 | Supply Only heating element (round/traingular) including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape, complete all as specified and as directed. |
| 170 | Supply Only heating element (round/traingular) including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape, complete all as specified and as directed. |
| 171 | Supply only thermostate including rubber/pvc gasket to be set to a temperature not higher than the range of 70 degree Centrigade suitable for existing geysers of capacity 25/35/50 ltrs including taking down existing unserviceable thermostat, complete all as specified and as directed. |
| 172 | Supply only high pressure valve with dead weight suitable for 25/50 ltrs capacity Geysers including taking down existing unserviceable high pressure valve, complete all as specified and as directed. |
| 173 | Supply only PVC connecting pipe 18\\" long with brass adopters for cold water and connecting up with complete for 25/35/50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe, complete all as specified and as directed. |
| 174 | Supply only PVC connecting pipe 18\\" long with brass adopters for hot water and connecting up with complete for 25/35/50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe, complete all as specified and as directed. |
| 175 | Supply only in repairs brass non return valve (check valve) 15mm bore with necessary Gl specials including taking down existing unserviceable non return valve, complete all as specified and as directed. |
| 176 | S&F exhaust fan/brisk air fan of size 380 mm sweep, Steel body, complete all as specified and as directed. |
| 177 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed. |
| 178 | Note:- Schedule of credit Rs 53,669.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
