Tender For Estimate For Construction Of Lift Scheme At Village Chandpur Rurki At Rd 112526M Left Side Of Kandi Canal Stage 2, Hoshiarpur-Punjab

TDR : 54863145

Tender Notice
BOQ

5 Days Left

Hoshiarpur , Punjab

Tender Brief : Tender For Estimate For Construction Of Lift Scheme At Village Chandpur Rurki At Rd 112526M Left Side Of Kandi Canal Stage 2

Document Fees
₹ 2000 /-

EMD
₹ 300000.0 /-

Tender Value
₹ 1.50 Crore /-

Submission Date
01-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation by mechanical means (JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation ,watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter. Complete in all respect as per Design, Drawings Specifications and Instructions of Engineer-in-Charge.
2	Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
3	Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tap) as per IS 10221 Including of Primer etc. excluding cost of excavation Complete in all respect as per per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. ( b) 150 mm internal diameter)
4	Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. (b) 100 mm internal diameter ( For Overflow outlet and Drain Outlet)
5	Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc on surface and providing angle iron support or cement concrete block as support including painting with two or more coats of synthetic enamel paint of required shade Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
6	100 mm internal diameter ( For Suction Pipe and Scouring )
7	80 mm internal diameter (For Delivery Pipe)
8	Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) B. Class PN-1.6 as per ISI.
9	100 mm Dia. Sluice Valve
10	80 mm Dia. Sluice Valve
11	150 mm Dia Sluice Valve
12	200 mm Dia Sluice Valve
13	Providing & fixing Double Air Valve ISI Mark das per IS-14845 including jointing, all carriages complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.(d) C.I Double Air valve (80 mm).
14	Providing and fixing ISI Marked Non –return valves flanged end class PN-1.6 as per IS 5312/2004 in pipe lines including Jointing& cost of nut bolt , rubber insertion etc complete in all respect as per Design, Drawings , Specifications and Instructions of Engineer-in-Charge ( B. Class PN-1.6 as per ISI with gun metal flap)
15	80mm i/d Non- Return Valve
16	150 mm i/d Non- Return Valve
17	200 mm i/d Non - Return Valve
18	Providing and fixing Hydropneumatic Tank of Capacity 500 ltr , orifice Dia 80mm, gas precharged at 20 kPa for Raw Water Application complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge
19	Providing and fixing in position Cast Iron foot Valve flanged ends with rubber sheet as per IS 4038 including cost of nut bolt , rubber insertion etc complete in all respect as per Design, Drawings , Specifications and Instructions of Engineer-in-Charge
20	150 mm i/d Cast Iron foot Valve
21	Providing and fixing Bell Mouth ( Size 150x100mm) as per relevant IS Codes including cost of nut bolt , rubber insertion etc complete in all respect as per Design, Drawings , Specifications and Instructions of Engineer-in-Charge
22	Providing & fixing of Electro-magnetic Flowmeter of 80 mm line size on pipeline for raw water with fixed/ wall mounted display including wiring complete in all respect; Make: ABB/Siemens/Nivo /Fedral/Forbes Marshall.
23	Providing and fixing Centrifugal Pump 415V,50HZ, Rated head 33-35m, Rated Discharge 13-14 lps) complete in all respect as per Design, Drawings , Specifications and Instructions of Engineer-in-Charge
24	Providing and fixing control panel consisting 03 nos 12 hp motor soft starters; 01 No controller for hydro pneumatic system; 01 no starter for vaccuum pump; 01 no. level switch controller; 01 HDD suitable capacity capacitor box with APFC relay: with 02 Nos. main incomers 250 Amps MCCB for electrical supply / solar supply; spare MCBs and ELCB along with protection form Surge inrush should be provided complete in all respect as per Design, Drawings , Specifications and Instructions of Engineer-in-Charge
25	SOFT STARTERS for Item No. 12: 3 No. 100 A, 3 Pole, 50 kA MCCB with adjustable overload protection (70% to 100%) with ROM & spreader, 3 wire suitable for inline connection with LCD display for precise motor start, stop, monitor, control and protection having adjustable settings like initial voltage output between 30-70 % of the nominal voltage, Dual current limit between 200 % and 500 % of the soft starter’s rated full load current with timer, adjustable Ramp in and ramp out time, kick start etc. Soft starter must have integrated motor and load protection features like overload protection with dual overload class settings, high current protection, locked rotor protection, under load protection and torque control feature for precise pump control, 1 No. Aux contractor, 3 No. start push button; 3 No. stop push button, mushroom head; 09 Nos. indicator lamps on/off/trip; 3 No. A/M selector switch; 3 No. control MCB 2 A; 09 Nos. control terminals; 18 Nos. power terminals; 03 No. neutral link
26	Construction of Masonary Sluice Valve Chamber excluding Sluice Valve cover as per standard design & drawings of public health department
27	Size 0.9mx0.9m
28	Providing and installation of net metering tied Solar Photovoltic Power system ( Capacity 20 kw) as per PSPCL norms complete in all respect.
29	Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable(ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by theEngineer-in-charge Overall size 6.0sq.mm (84/0.3mm), 3Core
30	Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. B Mechanical Means (A) Depth upto 3 m complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
31	Manual Means (A) Depth upto 3 m
32	Mechanical Means (A) Depth upto 3 m
33	Cement concrete 1:4:8 with Stone Aggregate 40mm gauge, mixing by mechanical means using concrete mixer volumetric type complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
34	Steel Work fixed independently without connected plates Including cutting hoisting and fixing in position including supply, carriage etc. of all materials. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
35	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
36	Centering and shuttering for columns (circular or curved in plain) complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
37	Centering and shuttering for faces of walls, partitions, retaining walls and the like ( vertical or battering) including attached pilasters, buttresses etc when curved complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
38	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
39	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
40	Centering and shuttering for R.C.C. domes complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
41	Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
42	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
43	Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shutteriing in superstructure complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
44	Extra for RCC/PCC work done above 4 metres height (where any single storeyexceeds 4 metres in height) for everyadditional height of 1 metres or part thereof. complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
45	Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC) complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
46	Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I.earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same,10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixtureetc., up to 14 metre in length (including boring & refilling). (a) Earthing With 8 S.W.G (4mm Dia) GI wire in 15mm dia G.I reducing socket 50mmx15mm ( upto 14 Metre in Length) complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
47	Providing and fixing Lightning Conductor complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
48	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position as per design, drawing, specifications and Instructions of Engineer -in-Charge.
49	Steel Work fixed Independently without connecting plates including cutting hoisting and fixing in position complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge
50	Flats
51	Angles
52	Applying priming coat with metal primer on new steel or iron work including preparation of surface complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge
53	Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge
54	Providing, Laying, fixing & jointing of u.P.V.C. Sockted Pipes (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing. Complete in all respect as per Specifications,Drawings and Instructions of Engineer-in-Charge.
55	32 mm dia. pipe of 8 Kgf. /sqcm
56	50 mm dia. pipe of 6 Kgf. /sqcm
57	75 mm dia. pipe of 4 Kgf. /sqcm
58	100 mm dia. pipe of 2.5 Kgf. /sqcm
59	125 mm dia. pipe of 2.5 Kgf. /sqcm
60	150 mm dia. pipe of 2.5 Kgf. /sqcm
61	200 mm dia. pipe of 2.5 Kgf. /sqcm
62	Supplying and Fixing uPVC Riser for Release of Water at different outlet. Complete in all respect as per Design, P.W.D Specifications and Instructions of Engineer-in-charge.
63	32 mm dia. pipe of 8 Kgf. /sqcm
64	50 mm dia. pipe of 6 Kgf. /sqcm
65	75 mm dia. pipe of 4 Kgf. /sqcm
66	100 mm dia. pipe of 2.5 Kgf. /sqcm
67	125mm dia. pipe of 2.5 Kgf. /sqcm
68	150 mm dia. pipe of 2.5 Kgf. /sqcm
69	200 mm dia. pipe of 2.5 Kgf. /sqcm
70	Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge) B. Class PN-1.6 as per ISI. Complete in all respect as per Specifications,Drawings and Instructions of Engineer-in-Charge.
71	50 mm Dia. Sluice Valve Flanged
72	75 mm Dia. Sluice Valve Flanged
73	100 mm Dia. Sluice Valve Flanged
74	125 mm Dia. Sluice Valve Flanged
75	150mm Dia. Sluice Valve Flanged
76	200 mm Dia. Sluice Valve Flanged
77	Providing & fixing Double Air Valve ISI Mark das per IS-14845 including jointing, all carriages complete in all respect as per Design,Drawings and Instructions of Engineer-in-Charge.(d) C.I Double Air valve (50mm).
78	Providing and fixing ISI Marked Alfa Valves . complete in all respect as per Specification and Instructions of Engineer-in-Charge.
79	32mm Dia Alfa Valve
80	50mm Dia Alfa Valve
81	75 mm Dia Alfa Valve
82	100 mm Dia Alfa Valve
83	125 mm Dia Alfa Valve
84	150mm Dia Alfa Valve
85	Cement concrete 1:2:4 With stone ballast or shingle, mixing by mechanical means using concrete mixer volumetric type. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
86	First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
87	Cement plaster 1:4 (12.50mm) thick. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
88	Supplying and Fixing uPVC Equal Tee confirming to relevant IS Codes with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
89	32x32x32mm (10kgf/cm2)
90	50x50x50mm (6kgf/cm2)
91	75x75x75mm (4kgf/cm2)
92	100x100x100 mm (4 kgf/cm2)
93	125x125x125mm (4 kgf/cm2)
94	150x150x150mm (4 kgf/cm2)
95	200x200x200mm (4 kgf/cm2)
96	Supplying and Fixing UPVC Reducer confirming to relevant IS Code with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
97	200x100mm
98	200x150mm
99	200x125mm
100	150x125mm
101	125x100mm
102	125x32mm
103	100x75mm
104	100x50mm
105	100x32mm
106	75x50mm
107	75x32mm
108	50x32mm
109	Supplying and Fixing Upvc 90 Degree Bend confirming to relevant IS Code with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
110	32 mm dia. (10kgf/cm2)
111	50 mm dia. (6 kgf/cm2)
112	75 mm dia. (4kgf/cm2)
113	100 mm dia. (4 kgf/cm2)
114	125 mm dia. (4kgf/cm2)
115	150mm dia (4 kgf/cm2)
116	200mm dia (4 kgf/cm2)
117	Supplying and Fixing Upvc Socket confirming to relevant IS Code with latest Ammendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
118	32 mm dia. (10kgf/cm2)
119	50 mm dia. (6 kgf/cm2)
120	75 mm dia. (4kgf/cm2)
121	100 mm dia. (4 kgf/cm2)
122	125 mm dia. (4kgf/cm2)
123	150mm dia (4 kgf/cm2)
124	200mm dia (4 kgf/cm2)
125	Supplying and Fixing of Cast Iron Flanges confirming to relevant code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.
126	50 mm
127	100mm
128	125 mm
129	150mm
130	200 mm
131	Supplying and Fixing of MS Service Saddle confirming to code with latest Amendments if Any at Site. Complete in all respect as per P.W.D Specifications and Instructions of Engineer-in-charge.
132	50x50mm
133	75x50mm
134	100x50mm
135	125x50mm
136	150x50mm
137	200x50 mm
138	Providing ,Laying , Jointing , fixing and testing of ISI Marked GI Pipe (as per IS 1239) B-Class including cost of specials (such as tees,bends, sockets, elbows etc.) painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge.
139	50mm i/d
140	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
141	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shutteriing in superstructure complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
142	First class burnt brick work laid in cement sand mortar 1:4 in first Storey upto 4 meters above plinth level. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
143	Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
144	Terracing Consisting of Tiles 22.86x11.43x3.83 cm laid over 25 mm mud Plaster7.5 cm mud fillingon another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of R.C.C slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
145	Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
146	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
147	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
148	Finishing walls with exterior decorative cement based paint such as snowcem robbiacem etc. two or more coats to give an even shade complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
149	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
150	Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
151	Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of size and design / shape laid in ordinary Grey and pattern over and including 40mm thick compacted bed of Coarse sand filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge for non traffic areas and streets having width less than 3.05 mt ( Also not to used over footpaths)
152	Precast Cement Concrete Kerb
153	Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
154	Chowkats of Red meranti Normal (18to 19 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
155	Double Rebate (60mm x 150mm) (60mm x 150mm)
156	Single Rebate (60mm x 100mm)
157	Red meranti Normal Super (18 to 19 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
158	Panelled, glazed or glazed and panelled.(i) 40mm thick (Single Leaf)
159	Wire Gauge Red meranti wood Super (18 to 19 kg per cft. Approx.) door shutter without springs housed in chowkats complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
160	35 mm Thick
161	Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
162	Glazing area above 0.09 sqmiii) 5.0mm thick Plate glass (INDIAN)
163	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
164	c) I.S.I Designation No. III (size of door 851mm to 1000mm)
165	Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality) in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
166	Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed)complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
167	Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. (a) For Single Rebate
168	Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge (b) b) Glass panes 4mm or 10.75 kg / sqmexceeding 0.4 sqm of area
169	Providing and fixing G.I. Sheet 0.80mm thick garage doors, with 40mm x 40mm x6mm angle iron frame with diagonal braces, 3.15mm thick gusset plates at the top and 25mm dia meter pulleys and T-iron 50mm x 50mm x 6mm guides at bottom including locking arrangement with handles and pintles, etc. complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. (a) For Single Rebate
170	Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
171	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
172	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shadecomplete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
173	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) complete in all respect as per Specifications and Instructions of Engineer-in-Charge.
174	Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
175	Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.
176	Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
177	a) C.P. brass toilet paper holder
178	Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
179	Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
180	Vitreous chinaware standard white pedestal for wash hand basin.
181	Providing and fixing jet spray with 2'-6\\" long PVC pipe.:- With C.P. Brass nut
182	Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer_x0002_in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect: Size 470mmx370mmx180mm
183	Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.
184	Brass Bib cock/Stop cock 15mm x 400gm
185	Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
186	Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in- charge) fixed in to wall with brass screws complete in all respect.
187	Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)
188	Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.:- C.P.brass 15mm stop cock Male and female end
189	Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
190	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
191	b) Size 550mmx400mm
192	Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
193	f) Aluminium khunti with 6 pegs
194	Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
195	Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
196	a) C.P. Brass extension piece, 25mm long to 50mm long
197	Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
198	a) PVC tube connection of size 15mm x 300 mm with C.P. Brass nut
199	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
200	a) 160mm o/d single socket SWR UPVC pipe lines laid complete
201	b) 110mm o/d single socket SWR UPVC pipe lines laid complete
202	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
203	Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
204	d) G.I. tank nipple 32mm i/d
205	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes (as per IS:15801-2008) SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing including testing of pipes complete as per direction of Engineer in Charge. Concealed work- including cutting chase & making good the wall etc.
206	d) PN - 16 Pipe, 32mm o/d
207	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining
208	B) For 110mm o/d pipes: Single Tee
209	B) For 110mm o/d pipes: P Trap/Floor Trap 110mm x 110mm
210	Earth work excavation in ordinary soil, exclusive of compensation of earth:-
211	Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods.
212	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
213	Single Socket Type A :160mm o/d single socket SWR UPVC pipe lines laid complete
214	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
215	A) For 160mm o/d pipes: ii) Single Tee
216	A) For 160mm o/d pipes: iv) Elbow 90 degree (all side socket)
217	A) FOr 160mm o/d pipes: v) Vent Cowl
218	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm
219	C) 150mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
220	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure (4kgf/cm2) comforming to IS:4985, including fixing with MS Clamps.
221	U-PVC pipes (working pressure 4 kgf./ sqcm) pipe 110 mm dia.
222	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
223	a) UPVC 110 mm bend
224	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
225	Wiring fan point (With fan box)
226	Wiring light point
227	Wiring 6Amp. wall socket point
228	Wiring 6Amp. Plug control comprising wall socket point
229	Wiring 16/20Amp. power plug control point
230	Wiring light point with double control switches.
231	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
232	Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
233	(xi) Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
234	PVC INSULATED FR COPPER CONDUCTOR CABLES:
235	Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
236	(iii) Overall size 2.5sq.mm (Un-sheathed)
237	Supply Of Electrical Items
238	Ceiling Fan 48\\" Havell's make
239	Heavy Duty Exhaust fan 12'' Havell's make
240	Tubelight set 36 watt LED make
241	LED light 15 watt round/square Havell's make
242	Erections of fans :
243	Erection of ceiling/cabin/exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete
244	Erection of Ceiling Fan
245	Erection of Exhaust Fan with Louver shutter on the wall /window grill
246	Erection of light fixtures on wall /ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete
247	Erection of 1x20/28/36/40W Box Type ( LED / Fluorescent ) light fixture
248	Providing and fixing of junction box/ termination box for pumping sets of suitable size as per site requirement along with proper earthing inside the pump control room complex to satisfaction of Engineer in charge
249	Providing and fixing of Aluminium armoured cable of 70 sq. mm 3.5 core from transformer to control panel and main incomer to Change over switch and should be laid losse in trench as per norms of PSPCL
250	Providing and fixing of common header or manifold of 200mm dia. upto 10 meter length electrically welded steel pipe confirming to IS:3589/1239 with latest amendments for connection of delivery of pumps from sump and fitted as per site requirements complete as shown in attached drawing consisting of 1 No. 200mm D/F MS Bend any deg; MS fabricated Tee 3Nos. 200 x 80 x 200; 1 No. 1.25” socket for Pressure Gauge; 1 No. A/F Tee of 200 X 200 X 80 size; MS fabricated reducer of 200 x 150 mm size; MS flanged End of 200 mm size for scouring and nuts-bolts, gaskets and flanges.
251	Providing, fixing of Maintanance free (Chemical) Earthing with all the allied Material for LT feeder Panel, Tranformer, Genset, Motors etc.
252	Providing and fixing of GI earthing Strip 50 mm x 5 mm clamped/recessed to ground/wall
253	Providing and fixing common line electrical driven vaccum pump system connected in 40 mm line size with seprate butterfly valves and non return valve for suction of air at inlet of 03 nos centrigul pumps to be operated with above same control panel
254	Providing and fixing of flanged 100 mm line size M.S. puddle collar at suction side of centrifugal pumps for ease of dismantling and refitting purposes complete in all respect as per specifications
255	Providing and fixing S.S Pressure Gauge complete as required complete in all respect. Dial dia 100mm 0-16 Kg
256	Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect. 4.5 kg capacity
257	Supplying and fixing of nominal 2.5mm±10% thick fire retardant mats conforming to IS:15652 and meeting the requirement of IS 5216, IS 8437, IEC 479 Pub-I along with suitable adhesive/chemibound resin water proof compound and sealing material as per in service recommendations class-C of IS:15652 and suitable for class A up to 3.3 kV installations as per DNIT specification
258	Construction of Grill/gratings/trench covers or etc as per drawing and design to be submitted by the firm for approval by department as per EIC
259	Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump monoblock to be fixed on existing panel complete in all respects.
260	Campus Lighting L bracket mounted with 60 watt street led light at site every 10 m as per standard norms. Provision of manual changeover to auto power in case of grid power failure (1 Light pole)
261	Supply, erection, testing and commissioning of Inverter Type: Pure Sine Wave Inverter; Capacity: 3500 VA/ 48V; Support: Four Batteries of 12V; Max.Peak Load - 2940 watt Battery Details- Type: Tall tubular battery; Construction: Rugged, Rated Capacity: 4Units - RC 18000 150 Ah 150 Ah/12V, Water Level indicators; safety: MCB for protection from Input main, Auto over-load handling capacity, Bypass switch for supplying output directly from grid in case of Home UPS fault Inverter for power backup for campus lightening
262	Supply, erection, testing and commissioning of portable dewatering pump for cleaning of sludge inside complex of 2 HP Submersible type including panel and wire and 1.5 \\" flexible hose pipe to the nearest disposal point upto 10 meters as per site requirement complete in all respect
263	Providing and finxing of MS Blind Flanges of 20 mm thk for following
264	Line size 100 mm for Scouring
265	Line size 200 mm for Header
266	Supplying, Fixing & lowering of Stainless Steel Cage type wire wound screen as per IS:8110-2000 or latest ISI marked Duly welded with suitable grade S.S welding electrode.to lower the strainer into canal. 200mm Steel Strainer (slot size 0.50mm) 6.30 mm thickness
267	Supplying, lowering & fixing of M.S Special socket to connect S.S Strainer to M.S Pipe duly welded with suitable grade welding electrode complete in all respect. 150mm internal diameter
268	Extra for furniture
269	Crop Compensation
270	Payment Charges for Electric Connection to PSPCL
271	Payment Charges for Water Connection to Water Supply Department
272	Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. B Mechanical Means (A) Depth upto 3 m complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
273	Manual Means (A) Depth upto 3 m
274	Mechanical Means (A) Depth upto 3 m
275	Cement concrete 1:4:8 with Stone Aggregate 40mm gauge, mixing by mechanical means using concrete mixer volumetric type complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
276	Cement concrete 1:2:4 With stone ballast or shingle, mixing by mechanical means using concrete mixer volumetric type. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
277	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
278	Centering and shuttering for columns (circular or curved in plain) complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
279	Centering and shuttering for faces of walls, partitions, retaining walls and the like ( vertical or battering) including attached pilasters, buttresses etc when curved complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
280	Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
281	Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
282	Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
283	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
284	Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shutteriing in superstructure complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge.
285	First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
286	First class burnt brick work laid in cement sand mortar 1:4 in first Storey upto 4 meters above plinth level. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
287	Cement plaster 1:4 (12.50mm) thick. Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
288	Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
289	Terracing Consisting of Tiles 22.86x11.43x3.83 cm laid over 25 mm mud Plaster7.5 cm mud fillingon another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of R.C.C slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing Complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
290	Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
291	Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
292	Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
293	Finishing walls with exterior decorative cement based paint such as snowcem robbiacem etc. two or more coats to give an even shade complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
294	Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
295	Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
296	Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) complete in all respect as per Specifications and Instructions of Engineer-in-Charge.
297	Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro hydraulic compaction machine and of size and design / shape laid in ordinary Grey and pattern over and including 40mm thick compacted bed of Coarse sand filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge for non traffic areas and streets having width less than 3.05 mt ( Also not to used over footpaths)
298	Precast Cement Concrete Kerb
299	Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
300	Chowkats of Red meranti Normal (18to 19 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
301	Double Rebate (60mm x 150mm) (60mm x 150mm)
302	Single Rebate (60mm x 100mm)
303	Red meranti Normal Super (18 to 19 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
304	Panelled, glazed or glazed and panelled.(i) 40mm thick (Single Leaf)
305	Wire Gauge Red meranti wood Super (18 to 19 kg per cft. Approx.) door shutter without springs housed in chowkats complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
306	35 mm Thick
307	Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
308	Glazing area above 0.09 sqmiii) 5.0mm thick Plate glass (INDIAN)
309	Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
310	c) I.S.I Designation No. III (size of door 851mm to 1000mm)
311	Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality) in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
312	Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed)complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
313	Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. (a) For Single Rebate
314	Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge (b) b) Glass panes 4mm or 10.75 kg / sqmexceeding 0.4 sqm of area
315	Providing and fixing G.I. Sheet 0.80mm thick garage doors, with 40mm x 40mm x6mm angle iron frame with diagonal braces, 3.15mm thick gusset plates at the top and 25mm dia meter pulleys and T-iron 50mm x 50mm x 6mm guides at bottom including locking arrangement with handles and pintles, etc. complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge. (a) For Single Rebate
316	Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
317	Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.complete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
318	Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shadecomplete in all respect as per Design, Drawings, Specifications and Instructions of Engineer-in-Charge.
319	Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position as per design, drawing, specifications and Instructions of Engineer -in-Charge.
320	Steel Work fixed Independently without connecting plates including cutting hoisting and fixing in position complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge
321	Flats
322	Angles
323	Applying priming coat with metal primer on new steel or iron work including preparation of surface complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge
324	Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work complete in all respect as per design, drawing, specifications and Instructions of Engineer -in-Charge
325	Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
326	Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.
327	Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect.
328	a) C.P. brass toilet paper holder
329	Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
330	Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.
331	Vitreous chinaware standard white pedestal for wash hand basin.
332	Providing and fixing jet spray with 2'-6\\" long PVC pipe.:- With C.P. Brass nut
333	Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer_x0002_in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect: Size 470mmx370mmx180mm
334	Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.
335	Brass Bib cock/Stop cock 15mm x 400gm
336	Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
337	Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in- charge) fixed in to wall with brass screws complete in all respect.
338	Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)
339	Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.:- C.P.brass 15mm stop cock Male and female end
340	Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
341	Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
342	b) Size 550mmx400mm
343	Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
344	f) Aluminium khunti with 6 pegs
345	Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
346	Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
347	a) C.P. Brass extension piece, 25mm long to 50mm long
348	Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.
349	a) PVC tube connection of size 15mm x 300 mm with C.P. Brass nut
350	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
351	a) 160mm o/d single socket SWR UPVC pipe lines laid complete
352	b) 110mm o/d single socket SWR UPVC pipe lines laid complete
353	Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.
354	Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.
355	d) G.I. tank nipple 32mm i/d
356	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes (as per IS:15801-2008) SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing including testing of pipes complete as per direction of Engineer in Charge. Concealed work- including cutting chase & making good the wall etc.
357	d) PN - 16 Pipe, 32mm o/d
358	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining
359	B) For 110mm o/d pipes: Single Tee
360	B) For 110mm o/d pipes: P Trap/Floor Trap 110mm x 110mm
361	Earth work excavation in ordinary soil, exclusive of compensation of earth:-
362	Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods.
363	Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
364	Single Socket Type A :160mm o/d single socket SWR UPVC pipe lines laid complete
365	Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
366	A) For 160mm o/d pipes: ii) Single Tee
367	A) For 160mm o/d pipes: iv) Elbow 90 degree (all side socket)
368	A) FOr 160mm o/d pipes: v) Vent Cowl
369	Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm
370	C) 150mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
371	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure (4kgf/cm2) comforming to IS:4985, including fixing with MS Clamps.
372	U-PVC pipes (working pressure 4 kgf./ sqcm) pipe 110 mm dia.
373	Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.
374	a) UPVC 110 mm bend
375	RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
376	Wiring fan point (With fan box)
377	Wiring light point
378	Wiring 6Amp. wall socket point
379	Wiring 6Amp. Plug control comprising wall socket point
380	Wiring 16/20Amp. power plug control point
381	Wiring light point with double control switches.
382	PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
383	Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-
384	(xi) Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)
385	PVC INSULATED FR COPPER CONDUCTOR CABLES:
386	Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-
387	(iii) Overall size 2.5sq.mm (Un-sheathed)
388	Supply Of Electrical Items
389	Ceiling Fan 48\\" Havell's make
390	Heavy Duty Exhaust fan 12'' Havell's make
391	Tubelight set 36 watt LED make
392	LED light 15 watt round/square Havell's make
393	Erections of fans :
394	Erection of ceiling/cabin/exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete
395	Erection of Ceiling Fan
396	Erection of Exhaust Fan with Louver shutter on the wall /window grill
397	Erection of light fixtures on wall /ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) Cable 0.75 sqmm Complete
398	Erection of 1x20/28/36/40W Box Type ( LED / Fluorescent ) light fixture
399	Extra for furniture Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Punjab Tenders

Machinery and Tools Tenders

Material Handling Machinery Tenders

Passenger Lift Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Estimate For Construction Of Lift Scheme At Village Chandpur Rurki At Rd 112526M Left Side Of Kandi Canal Stage 2, Hoshiarpur-Punjab

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Estimate For Construction Of Lift Scheme At Village Chandpur Rurki At Rd 112526M Left Side Of Kandi Canal Stage 2, Hoshiarpur-Punjab

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us