Tender For Essential Repairing And Painting Of Bungalow No.- L/9 At Tirap Colliery, Ledonit No. - Nec/Cil/Mrg/Et/493; Date: 27.03.2026Tender Id - 2026_Nec_350743 _1
Tender Value
4.33 Lakhs
Estimated cost
Bid Submission
07 Apr 2026
0 days left
EMD
5500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirap → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Essential Repairing And Painting Of Bungalow No.- L/9 At Tirap Colliery, Ledonit No. - Nec/Cil/Mrg/Et/493; Date: 27.03.2026Tender Id - 2026_Nec_350743 _1
BOQ
| Sl. No. | Item Description |
| 1 | Providing dressed wood work in post, walls, battens, post plate bressumers,choukhats etc. including supplying and fixing with spikes,nails, bolt and nuts of 12 mm dia (M.S) and requried length etc. complete with kiricide oiling two coats to faces in contact with C.C or masonry (M.S flats, angle clesats and bolt and nuts required for flats, angle cleats whereever use shall be measured and paid separately).including supplying, fitting and fixing with M.S. hold fast (40 mm x 3 mm x 250 mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.With 2nd class treated timber |
| 2 | Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross brand and face veneered ply wood panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75 mm 3.5mm) 6 nos with necessary wood screws. Decorative type face panel and block board core.35mm thick |
| 3 | Providing and fixing 25mm thick wooden shutters for cup board including black enamelled M.S.butt hinges (75mm x 40mm x1.12mm) 6 nos. with necessary wood screws (Fully paneled). (ii) Using Particle/Block board. (d) With block board (both side commercial 19mm/20mm thick). |
| 4 | Providing, fitting and fixing fully glazed window with sash bars including oxidised M.S butt hinges (75 mm x 60 mm x 3.15 mm) 2 nos on each leaf and 3 nos on single leaf (glass panes to be measured and paid separately) |
| 5 | Providing, fitting and fixing 1 st class local wood (Bosum/ Hollock) battened, framed and braced door and window shutters including oxidised iron butt hinges (100 mm x 58 mm x 1.90 mm) 6 nos with necessary screws. |
| 6 | Providing undressed wood work in roof truss,rafter, purlin, tie and the like including hoisting and fixing in position with necessary spikes,nails including M.S straps with bolt and nuts etc. complete with kiricide oiling two coats to all timber members and two coats of anticorrosive paint to M.S straps (M.S flats, angle clesats and bolt and nuts required for flats, angle cleats wherever use shall be measured and paid separately). |
| 7 | Providing asbestos cement corrugated sheet roofing 6 mm thick fixed with G.I. Coach screw squre head, 8 mm dia and 115 mm long/ G.I. cranked hook bolt/G.I. Holt/G.I. cranked bolt of 8 mm dia with G.I. Flat washer 25 mm dia x 1.0 mm thick and bitumen washer 25 mm dia x 3 mm thick complete excluding the cost of roof truss, purlins etc. (roof trusses turplin etc. to be measured and paid separately) |
| 8 | Providing and fixing A.C. two pices adjustable close fitting seated or unserated ridging including supplying, fitting and fixing galvd. Coach screws 115 mm long x 8 mm dia and 1.6 mm of G.I. J or L hook of 8 mm dia with G.I. Flat waher 25 mm x 12.6 mm and bitumen washer 25 mm x 3 mm complete. |
| 9 | Providing bird proof hexagonal galvanised wire netting at ceiling level of Assam type building including fitting and fixing with first class local wood frame of size 50 mm x 25 mm and beads of size 25 mm x 10 mm (for fitting and fixing the net with wooden frame) including lifting and fitting the same in position etc. complete as directed including two caots kiricide oiling of timeber works. |
| 10 | Mending roof leakage with black putty,tarfelt as directed and specified. |
| 11 | Providing.fitting and fixing Expanded metal 20mm x 60mm strands 3.25mm wide and 1.6mm thick for windows,openings etc. including fixing 50mm x 20mm beading of timber with necessary nails,wood screws etc. complete |
| 12 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. |
| 13 | Providing Cement plaster with cement mortar in prop. 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor in pathway. |
| 14 | Providing fly proof M.S wire netting of I.S gauge designation 85 with wire of dia 0.05 mm over hollock or other wood dressed frame including 1st class timber beading of 38mm x 12 mm size chamferred includuing fitteng fitting, fixing with nessecarry wood screws etc. complete as directed. |
| 15 | Demolishing mosaic floors of various thickness,both mosaic tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels. |
| 16 | Providing ANTISKID tiles of of approved quality , size, shape not less than 8 mm on floors, skirtings, over a cement mortar bed 15 mm thick of 1:3 (1 cement:3 coarse sand) approved make fix with Fix-A-Tile Choksey /Sika / Pedelite /Rouf)/ white cement complete at all levels as specified and directed. Vitrified. Normal Range. Deluxe. |
| 17 | Providing polished Ceramic wall tiles of approved quality, size, shape and thickness not less than 8 mm on walland skirting over cement mortar bed 10 mm thick in prop.1:3 (1 cement:3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey /Sika / Pedelite /Rouf)/ white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed( Cement plastering to be mesaured and paid separately). ( Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department).(Walls means both interior and exterior walls). |
| 18 | Dismantling all types of ceiling ,partition and wall lining and stacking the materials as directed by the department for all levels. |
| 19 | Providing undressed wood work in frame of false ceiling partitions etc. sawan, wrought, framed hoisted and fixed in position with necessary spikes,nails, M.S flat,angle/cleats with bolt and nuts complete including kiricide oiling two coats to unexposed surface of the timber (M.S flats, angle cleats and bolt and nuts required for flats, angle cleats wherever necessary shall be measured and paid separately). c)with 2nd class treated timber |
| 20 | Providing, fitting and fixing A.C. plain sheet building board in ceiling with necessary nails, wood screws including 1 st class local wood 50 mm x 12 mm (hollock/ bonsum/ sundi) beading including painting two coats to timber beads complete as directed ( ceilling joist to be measured and paid separately). |
| 21 | Providing 0.63 mm thick (24 gauge) galvd plain sheet in valley , lining, flashing etc. and fitted with gavd. Iron J or L hook bolts and nuts, G.I. limpet and bitumen washer complete, bent to shape and fixed in a positions as directed. |
| 22 | Providing and fixing clear sheet glass beded in putty and fixed with/ without wooden bidding including necessary cutting and glass to be required sized (payment for wooden bead shall be made separately) 1) Area of glass panes not exceeding 0.15 m2 |
| 23 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) a) Sliding door bolts 300 mm x 16 mm |
| 24 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) b) Tower bolts 200 mm x 12 mm |
| 25 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) c) Door Handles 150 mm |
| 26 | Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete. (anodised to bright natural matt & satin finished) m) Mortice lock vertical type 100 mm (Godrej with handle 6 lever) |
| 27 | Applying priming coat over new wood and wood based surfaces up to 100mm in girth/ width after and including preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter, sand papering and knotting. |
| 28 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) to give an even shade including cleaning the surfaces of all dirt,dust and other foriegn matter sand papering and stopping. a) General purpose (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) |
| 29 | Painting one coat (excluding priming coat) on old wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping. |
| 30 | Distempering (one coat) with oil bound distemper of approved brand and manufacture and of requried shade on old wall surface to give an even shade, after throughly brooming the surface free from dirt, loose scales and other foreign matter and also including preparing the surface even and sand papered smooth. |
| 31 | White washing with lime on old wall surfaces (one coats) to give an even shade including throughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter. |
| 32 | Painting one coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint of approved brand and manufacture (Asian paint/Berger paint/ICI paint/J&N paint/Nerolac) to give an even shade including cleaning the surfaces of all dirt,dust and other foreign matter. |
| 33 | Supplying,fitting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe,union clamps etc. complete as directed and specified.(Pipes will be measured separatly) |
| 34 | Providing, fitting and fixing mirror with plastic frame of size 500 x 400 mm |
| 35 | Providing,fitting and fixing vitrous china pedestal type water closet (European type W.C. pan 400mm high) with seat and lead,CP brass hinges and rubber buffers,CI/Ms brackets,40mm dia flush band with fittings including painting of fittings and brackets,required. (Flushing Cistern to be paid separately) |
| 36 | Supplying,fitting and fixing Chrome Plated(C.P.) shower 15mm dia. Of approved brand as directed and specified.(Pipes will be measured and paid separately) (I) Essco make Pressure adjustable shower (rose type) |
| 37 | Supplying,fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified.(G.I. & C.P. pipes will be measured separately) Bib cock short body |
| 38 | Supplying,fitting and fixing approved uPVC Pipes of different sizes with all necessary 'R'brand or similar approved uPVC Fittings such as bend,tee,elbow,reducer,nipple,plug,long screw fitting,clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches. Supreme/Prince/SFMC brand or other equvalent approved brand (High pressure pipe Sch-40) (f) 15 mm dia |
| 39 | Supplying,fitting and fixing approved uPVC Pipes of different sizes with all necessary 'R'brand or similar approved uPVC Fittings such as bend,tee,elbow,reducer,nipple,plug,long screw fitting,clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches. Supreme/Prince/SFMC brand or other equvalent approved brand (High pressure pipe Sch-40) (d) 25 mm dia |
| 40 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 27, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedApr 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender