|
| 1 | Excavation for foundation in hard murum including shoring and strutting,dewateringas necessary and disposing off excavated stuff as directed etc. complete. |
| 2 | Excavation for foundation in hard rock by Chiselling and welding and including shoring and strutting,dewatering as necessary and disposing off excavated stuff as directed etc. complete. |
| 3 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) |
| 4 | Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drilling hole of 3 2mm diameter up to 0.75 mtrs depth, placing the dowel inposition and effectively grouting the hole with CM 1:1 proportion etc. complete. |
| 5 | Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) |
| 6 | Providing and laying plain in situ / ready mix M-20 cement concrete of trap/ granite/quartzite/gneiss/crushed stone metal mechanically mixed, placed in foundation and compacted by vibration including necessary bailing out water, curing curing concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) (excluding dewatering by pump) for 14 days RCC Grade.With Concrete Mixer |
| 7 | Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners |
| 8 | Providing and laying in situ / ready mix controlled M-20 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 9 | Providing and layingin situ/ ready mix M-20 controlled cement concrete of trap/granite/ quartzite/ gneissmetal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro process or based PLC with SCADA enabled concrete batch mix plant / panmixer and fine agreegates of required specifications ( Natural sand/ VSI sand finely washed etc ) |
| 10 | Providing and laying in situ / ready mix M 20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCAD Aenabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) RCC work of Ballast walls & Kerb |
| 11 | Providing and laying in situ/ ready mix M 20 CC of trap /granite/ quartzite/ gneiss metal for wearing course 8 cm thick including compacting,finishing,curingandfillinginjoints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant /pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 12 | Providing,cutting,bending,hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 13 | Providing tar paper bearing including laying in proper position etc. complete. |
| 14 | Providing expansion joints with 25 mm thick bituminous pad as per detailed drawings etc. complete. |
| 15 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 16 | Providing 100 mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete. |
| 17 | Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) |
| 18 | Providing flexible apron of 100 cm thick comprising of loose stone boulders weighing not less than 40 Kilogram beyond curtain wall etc. complete. |
| 19 | Providing railing of mild steel angle post 2.0 m center to center of section 75 mm x 75 mm x10 mm or equivalent I/Csectionof height 1.05 above bridge surface with minimum anchor length of 30cmincludinghold fast of 25 mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30 cm x 30 cm x 30cm with three rows of 40 mm B class GI pipe provided at 30 cm on center to center including scaffolding and one coat of anti corrosive paint with two coats of oil painting, curing of concrete etc. complete. |
| 20 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) |
| 21 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor ,Work completion and liability periodetc ',having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamelon back side and border /messages /symbols etc.with approved colour shadepaint complete,on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35 mm x 35 mm x 3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm ,3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cmx 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 22 | Test Reports |
| 23 | Royalty Please Enable Macros to View BoQ information |
