|
| 1 | M-150 class brick work in 1:4 cement and coarse sand mortar in Superstructure half brick work including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. S.I. no.310a |
| 2 | Dismantling cement concrete or brick or granolithic floors including stacking of dismantled materials as directed by the engineer in charge within distance of 60 mtr.(697) |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., size 600x600 mm complete. as per DSR 2023 11.41.2 |
| 4 | Dismantling old existing plaster including disposal of refuse as directed by the Engineer-in charge with in a distance of 60 metre(S.I. No. 706) |
| 5 | 12 mm thick plaster with cement and coarse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm including supply of all materials labour, tools & plants etc required for proper completion of the work. S.I. No.584i |
| 6 | Finishing walls withwater proof cement paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 7 | Finishing walls withwater proof cement paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) same as but old surface |
| 8 | Finishing walls with one coat of water proof cement paint of approved make and quality of previously old treated surface with this paint to give an even shade includiong supply of all materials , labour, and T&P required for proper completion of the work SI 662X2 |
| 9 | Two coats of oil bound distemper on old work including supply of all material, labour T&P and including all taxes etc. required for proper completion of the work (SI.No651*2) |
| 10 | Enamel painting One coat even painting coat wood or steel privesously painted New surface two coat ….of work. S.I PG 16 (1+2+4 III) |
| 11 | scraping old white or colour wash including disposal of refuse as directed by E/I within distance of 60 mtr.Si 708 |
| 12 | Cement concrete with 2 cm gauge grit approved stone ballast, approved coarsesand and cement in the proportion of 4:2:1 including supply of all materials, Labour and T&P etc. required for proper completion of the work.(S.I. No. 279i) |
| 13 | Providing and Laying Brick Coba 12mm thick laod with M-150 class brick bat coba as per Chap 11 New item No.-01 |
| 14 | S/F of flush door 32 mm thick commercial Quality conforming to I.S. 2202 part I (1983) including Fixing of wooden cleats and stoppers and including fixing and adjustment of hinge bolls locks handle springs fitting with necessary screws. (470i) |
| 15 | P/F of flyproof galvanized mosquito MS wire gauge to windowsand celerestory windows using wire guage with average width of aperture 1.4mm in both directions with wire of dia.0.63mm all complete with second class teak wood beading 62x19 mm as per Page 25 |
| 16 | S/F glass pans 4 mm thick of approved quality with brand and putty for window and ventilator mann section or wherever required on other places including cartage of all itemsAs per DSR 2023 14.5.1 unit rate 1090.65x0.735x106/107 |
| 17 | Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests materials, labour etc. DSR 2023 17.1.1 |
| 18 | Providing of 100mm dia P.V.C pipe including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work material |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints completeas per direction of Engineer in Charge.External work 15 mm nominal dia Pipes As per DSR 2023 18.9.1 |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints completeas per direction of Engineer in Charge.External work but 20 mm nominal dia Pipes As per DSR 2023 18.9.2 |
| 21 | Supplying and fixing of C.P. Brass bib cock 15 mm dia Long Body including supply of all materials, labour and tools & plants. and including threading of the pipe if required for proper completion of work As perDSR 2023 18.51.1 |
| 22 | Supplying and fixing of C.P. Brass stop cock 15mm dia including supply of all materials, labour and tools & plants. and including threading of the pipe if required for proper completion of work DSR 2023 18.52.1 |
| 23 | Providing and fixing full way gate valve 25 mm dia with wheel ISI marked heavy quality including supply of including supply of all materials, labour and tools & plants. required for proper completion of workDSR 2023 18.17.1 |
| 24 | Providing and laying Ceramic glazed tiles of size (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completeSI 628 |
| 25 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately DSR 2023 18.48A |
| 26 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :17.10.2 Kitchen sink without drain board610x460 mm bowl depth 200 mm As per DSR 2023 17.10.2 unit rate =3873.80x0.735x106/107 |
| 27 | Providing and fixing white vitreous china wash basin including making allconnections but excluding the cost of fittings : As peer DSR 2023 17.25.1 Flat back wash basin of size 630x450 mm |
| 28 | Dismantling of old damaged A.C sheets and including stacking of materials as per direction E/I DSR 2023 15.28.2 |
| 29 | Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. DSR 2023 10.16.1 unit rate =19439.98x0.735x106/ 107 |
| 30 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever D.s.r. no12.50 unit rate = 738.65x0.735x106/107 |
| 31 | Painting two coat on old surface over priming coat ( excluding cost of priming coat) on steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all material labour T&P etc. require proper completion of the work. PG 36 (1+2+4 III) |
| 32 | Supply and fixing rolling shutters of approved make made of 80×120mm cold rolled M.S.latch locked through out their entire length and mounted on specially deigned pipe shall with brackets side guides and arrangement for inside and out side locking with push and pull operation complete but including the cost of top cover 1.2 mm thick and springs(S.I.520) |
| 33 | Providing/fixing top cover for rolling shutter including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. (S.I 522) |
| 34 | Providing /fixing 27.5 cm long wire spring grade no.2 rolling shutterincluding supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. (S.I 521) |
| 35 | Providing and fixing0.50mm thick precoated galvanised iron profile sheets ridge plain 500-600 mm including all complete as per DRS 2023 12.51.1unit rate = 532.35x0.735x106/107 |
| 36 | Providing and laying in cement concrete 1:6:12 (1 cement :4 Fine sand{FM 2.20-3.60} : Brick ballast of 40 mm nominal size) and curing complete,including supply of all material labour T&P etc. required for proper completion of the work, in foundation and floors.SI 273 |
| 37 | Enamel painting One coat even painting coat wood or steel privesously painted old surface two coat ….of work. S.I PG 16 (1+2+4 III) |
| 38 | P/F 600x450mm Bevelled Edge Mirror of superior glass of approved Quality Page No.45 Sr No.01 |
| 39 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:2:4 in lintels of the doors and windows, excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.283 |
| 40 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:2:4 in slab of the doors and windows, excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.284 |
| 41 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:1.5:3 in beams of the doors and windows, excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.284 A |
| 42 | M-150 class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work..S.I. no.303 |
| 43 | M-150 class one brick thick wall brick work in 1.6 cement and coarse sand mortar in super Structure and plinth including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. S.I. No.303+ 309+310 |
| 44 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of work and including supply of all steel and wastage and overlapping and hooks SI NO.( 504) |
| 45 | Dismantling Brick work including disposal of refuse as directed by the Engineer-in charge with in a distance of 60 metre(S.I. No. 692) |
| 46 | Mild steel or iron work in heavy size such as trusses built up gates, door, frames,record racks roof work , gates etc. brought to required form including drilling holes , rivetting or welding where necessary and also including supply of steel, bolt ,nuts etc. & fixing of required for proper completion of the work SI 503 |
| 47 | Same as item no. 46 but in grill S.I no 502 C |
| 48 | P/Fixing of barbed iron wire fencing it to podt after stretching it icludinh labour and T&P etc. required for proper completion of the work but excluding supply of post and barbed wire but including cost of clips SI 513 |
| 49 | M-150 class brick work in 1:4 cement and coarse sand mortar in Superstructure work including supply of all materials, labour and tools & plants. etc. required for the proper completion of the work. S.I. no.303+309+310 |
| 50 | P/F in position collapsible steel shutters with vertical channels 20x1.0 with top and bottom rails of T iron 40x40x6 mm with 38 mm dia. Steel pulleys with bolts, nuts, locking, arrangement, stoppers, handle,complete including applying a priming coat of approved red lead paint(518) |
| 51 | Excavation in foundation trenches in ordinary soil( loam, clay or sand ) I/C ligt up to l.50m lead up to 30m & I/C filling, watering & ramming of excavated earth in to trenches or in to the space between trenches middle or in to the plinth and removal and disposal of Surplus Aprin as directed by the engineer in charge up to a distance of 30m from the foundation trenches.( S.I.251) |
| 52 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand{FM 2.20-3.60} : stone ballast of 40 mm nominal size) and curing complete,including supply of all material labour T&P etc. required for proper completion of the work, in foundation and floors.SI 281 |
| 53 | R.C.C. work with cement approved coarse sand and 2 cm.gauge approved stone grit in the proportion of 1:2:4 in Raft foundation, excluding supply supply of reinforcement but including fixing & binding the same with 24 B.W.G. G.I. wire and including the cost of binding wire and including supply of all materials, labour and tools & plants. Royalty etc. required for the proper completion of the work. S.I. No.287 |
| 54 | Mild steel or iron work of small size and sections such as holding down bolts hold fast ,tie rod,gratings etc.(when not included in overall rates) wrought to required form including supply of steel,bolts,nuts,and wastageetc. And its fixing required for proper completion of the work S.I. No.502 |
| 55 | Earth work in cutting or in embankment in ordinary soil excavation to be in the regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm thick layers including ramming and dressing the surface to required levels and slopes and also including 1.5 mt. lift & 30.0 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30.00 M distance as directed by the (Excluding Royalty) E.I. S.I. No. 253.cartage uptp 3KM |
| 56 | Sand filling in plinth including supply of necessary quantity of sand from ganga River including watering dressing wtc. Labour and T & P etc. Required for proper completion of work.(S.I.255) |
| 57 | Provinding and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete DSR 2023 13.26 |
| 58 | Joint filled with coarse sand and Maxphalt etc including supply of all materials Labour T&P etc |
| 59 | Supply and Carrying to site & fixing RS joist in position including welding to base plate and keeping in vertical position for proper completion of the work 200 x100 mm @25.40 Kg/M as per SI 503 |
| 60 | Providing & laying spreading and compacting 45-90mm stone aggregates of specifice size to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber appling and brooming crushable screening to fill-up the interstice of coarse aggregate watering and compacting to the required density Grading 1as per Technical specification Clause 404 B Morth |
| 61 | Providing & laying spreading and compacting stone aggregates of specifice size to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber appling and brooming crushable screening to fill-up the interstice of coarse aggregate watering and compacting to the required density Grading 2 as per Technical specification Clause 404 Morth |
| 62 | Providing & laying spreading and compacting stone aggregates of specifice size to water bound macadam specification including spreading in uniform thickness hand packing rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber appling and brooming crushable screening to fill-up the interstice of coarse aggregate watering and compacting to the required density Grading 3 as per Technical specification Clause 404 Morth |
| 63 | Providing & applying primer coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502 Morth |
| 64 | Providing & applying Tack coat with bitumen VG-10 grade using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surface treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause Morth &H 503 Morth |
| 65 | Providing & laying of dense graded Bituminous 50mm thickMacadam with bitumen VG-30 Bulk with 100-120 TPH batch type hot mix plant producing on average output of 75 tonnes per hour using crushed aggregates of specified grading ,premixed with bituminous binder@ 4.0-4.50 percent by weight of total mix and filler,transporting the hot mix to work site,laying with a hydrostatic paver finisher wih sensor control to the required grade ,level and alignment and rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per clause MORTH specification clause 507 complete in all respects. |
| 66 | Providing & laying of Bituminous Concrete 30mm thickwith bitumen VG-10 Bulk with 100-120 TPH batch type hot mix plant producing on average output of 75 tonnes per hour using crushed aggregates of specified grading ,premixed with bituminous binder@ 5.4 to 5.6 percent of mix and filler,transporting the hot mix to work site,laying with a hydrostatic paver finisher wih sensor control to the required grade ,level and alignment and rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per clause MORTH specification clause 509 complete in all respects. |
| 67 | P/L of factory made 80 mm thick interlocking cement concrete tiles(30mpa) including 25 mm thick compacted bed of fine sand compacting and proper embedding/laying of interlocking tiles leveling and dressing of surface to requried level and slope filling joints with fine sand supply and all material labour T&P etc. all complete.(New Item-1) |
| 68 | M-150 brick in 1:4 cement and Coarse sand morter in foundation and plinth including supply of all materials, labour and T& P etc. required for proper (SI No.305 |
| 69 | Earth work in cutting or in embankment in ordinary soil excavation to be in the regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm thick layers including ramming and dressing the surface to required levels and slopes and also including 1.5 mt. lift & 30.0 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30.00 M distance as directed by the (Excluding Royalty) E.I. S.I. No. 253. |
| 70 | Chequerred Precast cement concrete Tiles 22mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 22mm thick bed of cement mortar 1:4 (1cement: 4 coursesand) As per DSR 2023 11.20.1 Unit rate =1402.00x0.735x106/107 |
| 71 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2.0 cm graded approved stone shingle laid in panels finished with 3.0 mm floating coat of neat cement or cement and marble dust in 5:1 as specified and removing any overlapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper completion of the work without base. SI (605) |
| 72 | Drilling of 150 mm dia T/W bore suitable for 110mm dia pipe/200mm dia T/W bore suitable for 140 mm dia pipe all complete with labour T/P as per direction of engineer incharge Jal Nigam |
| 73 | Supply and lowering of 110 mm dia 6kg/cm2 PVC pipe/140mm dia 10kg/cm2 with plastic net cover slots of pvc pipe by UPIN(phenolex or app by E/I) all complete (ISI mark only) SOR 2017-18 Jal Nigam |
| 74 | S/F of 110mm PVC pipe adopter suitable for proper completion of the work.Jal Nigam |
| 75 | Supply of 1HP submersible pump set with starter UPIN 65m head (Pluga/Crompton Greeves /KSB) Jal Nigam |
| 76 | Supply and lowering of 40 mm dia ribbed screen Ashirvad PVC pipe (ISI marked)/ 32 mm dia G.I. Pipe by UPIN and fixed with boat site threaded SS nipple all complete.Jal Nigam |
| 77 | Transportation of all material T&P etc to the site of work, loading, unloading and proper stacking at the site including return cartage of unused material with the diging the pit of boring work including supply all labour T&P with with arrangement of water required etc all complete.Jal Nigam |
| 78 | Development of bore hole till the discharges of water become free from sand and turbidity by compression and disinfection of bore including supply of all labour T&P Jal Nigam |
| 79 | Chemical & bacteriological testing of water sample Jal Nigam |
| 80 | S/F of 6 to 32 Amp. SP MCB (10KA) C curve 1002 |
| 81 | S/F of 6 to 32 Amp. DP MCB (10KA) C curve 1009 |
| 82 | S/F of surface / flush mounting 4 ways SPN distribution board with additional metal door without MCBs complete in all respects and as directed at site.1022A |
| 83 | S/L of Aluminium Conductor PVC insulated armoured sheathed cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M. clamps etc. of suitable size or as directed the Engineer- incharge, complete in all respects. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 501b |
| 84 | Supply and filling bricks bats complete materials |
| 85 | Maintenance of Bituminous surface road and gravel or WBM road including filling pot holes and patch repair etc. restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and traimming of grass and weeds etc mentioned in GO No.55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.2022 & Enc letter No. 14 BDD-1 (NH)/40 MT-11/ 2024 Dated 03.01.2024 subjected to approval from Govt. maintence of 1st Year after completion of work @ Zero % of Total PC work amount of first Year @ 0.00% of Total Work Amount of Hotmix area |
| 86 | Maintainance of Second Year @ 0.25% of Total Work Amount of Hotmix Area |
| 87 | Maintainance of Third Year @ 0.50% of Total Work Amount of Hotmix Area |
| 88 | Maintainance of Forth Year @ 0.75% of Total Work Amount of Hotmix Area |
| 89 | Maintainance of FifthYear @ 1.00% of Total Work Amount of Hotmix Area |
| 90 | Maintenance of including filling pot holes and patch repair etc. restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and traimming of grass and weeds etc mentioned in GO No.55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.2022 & Enc letter No. 14 BDD-1 (NH)/40 MT-11/ 2024 Dated 03.01.2024 subjected to approval from Govt. maintence of 1st Year after completion of work @ Zero % of Total PC work amount of first Year @ 0.00% of Total Work Amount of Interlocking area |
| 91 | Maintainance of Second Year @ 0.25% of Total Work Amount of Interlocking area |
| 92 | Maintainance of Third Year @ 0.50% of Total Work Amount of Interlocking area |
| 93 | Maintainance of Forth Year @ 0.75% of Total Work Amount of Interlocking area |
| 94 | Maintainance of FifthYear @ 1.00% of Total Work Amount of Interlocking area Please Enable Macros to View BoQ information |
