|
| 1 | Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed. |
| 2 | Taking down carefully UNSV main switch and DB's including MCBs of of any size make, type and capacity and depositing at site complete all as specified and directed |
| 3 | M&L for point wiring complete with 1.5 Sqmm (nominal area) single core PVC insulated and unsheathed FRLSH multistranded copper conductor cable (maintaining colour code) 1100 volts grade drawn through and including PVC casing caping of adequate size but not less than 20mm in width and 1.2mm thick with all fittings and accossories ISI marked including modular surface box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc and complete with all fittings and accessories fixed to wall/ceiling for the following and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etcwith and including provisining of 1.5 sqmm (nominal area) PVC insulated flame retardant unsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor cable green in colour to common earth and connected to earth dolly for the following :- |
| 4 | One light/ Fan point controlled by one no one way switch complete all as specified and as directed. |
| 5 | One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed. |
| 6 | One 3 pin 5 Amps socket outlet 5/6 Amp on independent board with cable of 1.5 sqmm size. |
| 7 | One modular bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5Sqmm size complete all as specified and as directed. |
| 8 | M&L for point wiring complete with 4.0 Sqmm (nominal area) single core PVC insulated and unsheathed FRLSH multistranded copper conductor cable (maintaining colour code) 1100 volts grade drawn through and including PVC casing caping of adequate size but not less than 20mm in width and 1.2mm thick with all fittings and accossories ISI marked including modular surface box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc and complete with all fittings and accessories fixed to wall/ceiling for the following and making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces etcwith and including provisining of 4.0 sqmm (nominal area) PVC insulated flame retardant unsheathed FRLSH cable 1100 volt grade with multi stranded copper conductor cable green in colour to common earth and connected to earth dolly for fixed to wall/ ceiling for one 3/5 pin 15 Amp socket outlet |
| 9 | Supply and fixing Modular switch one way 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed. |
| 10 | Supply and fixing Modular socket outlet 2/3 pin plug, 6 Amps, universal socket 2 module 240 Volts complete all as specified and as directed. |
| 11 | Supply and fixing Modular switch one way modular type, 16 Amp, 1 module, 240 Volts complete all as specified and as directed. |
| 12 | Supply and fixing Modular socket 6/16A, 2 in 1, 2 module, 240 volts complete all as specified and as directed. |
| 13 | Supply and fixing Modular Bell push 5/6 Amp, 1 module, 240 Volts complete all as specified and as directed |
| 14 | Supply and fixing call bell, Ding dong, AC, 230 volt complete all as specified and as directed. |
| 15 | Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed. |
| 16 | Supply and fixing ceiling rose 3 point/ PVC/ Polycarbonate, isolated body 250/230 volts ISI marked complete all as specified and as directed. |
| 17 | Supply and fixing modular electronic fan regulator, stepped type, 220 volt, 100 watt complete all as specified and as directed. |
| 18 | Supply and fixing as in repair LED tube light fitting, 1x20 watt, 220-240 volt, AC, invertor type with inbuilt rechargeable lithium battery back up for emergency operation, decorative box type complete with LED tube, electronic driver, holder, diffuser and automatic changeover during power failure with minimum of 04 hours battery backup suitable for wall/ceiling mounting including connecting up with three core flexiblwe copper conductor of suitable size from ceiling rose complete all as specified and as directed. |
| 19 | Supply and fixing as in repair LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 20 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 21 | Supply and fixing as in repair 10W LED Bulkhead light, pressure die cast housing LED bulkhead with IP65 Protection and IK09 Impact resistance suitable for surface/wall mounted,complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. |
| 22 | Supply and fixing as in repair round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 23 | Supply and fixing as in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed. |
| 24 | Supply and fixing as in repair post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 25 | Supply and fixing as in repair LED security light fitting 35 Watt, new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP-66 roadway luminaire with high power LED source with acrylic cover complete all as specified and as directed. |
| 26 | Material and labour for 32mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.5 m long and bent to shape as required complete with sutiable clamp made out of 25x4mm Flat iron duly fixed 12mm dia nuts, bolts, washers etc fixed to pole complete with two coats of aluminium paint over a coat of red oxide complete all as specified and as directed |
| 27 | M&L for sub main wiring using four single core 10 Sqmm FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 25x12mm non metalic PVC casing N Caping & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including two single core 10 Sqmm earth wire, PVC insulated & unsheathed complete as in repair complete all as specified and as directed.. NOTE: Four runs of main wire, two run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 28 | M&L for sub main wiring with 6 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 25x12mm non metalic PVC casing N Caping & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 6 Sqmm earth wire, PVC insulated & unsheathed copper conductor green in colour duly connected to earth wire complete as in repair complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 29 | M&L for sub main wiring with 4 Sqmm (nominal area) with two runss (Red for phase and black for neutral) of single core FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 25x12mm non metalic PVC casing N Caping & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including single core 4 Sqmm earth wire, PVC insulated & unsheathed copper conductor green in colour duly connected to earth wire complete as in repair complete all as specified and as directed.. NOTE: 2 runs of main wire, 1 run of earth wire, 1 run of PVC Conduit with accessories shall be measured as one length. |
| 30 | Supply and fixing as in repair Factory made load line Distribution board in sheet steel enclosure vertical DOUBLE door with 200 Amps rated bus bar, TPN, 4 ways, 240 Volts suitable for housing MCCBs as incomer (except MCCB) including cutting chases for sinking boxes complete all as specified and as directed. |
| 31 | Supply and fixing as in repair Factory made board distribution in sheet steel enclosure vertical SINGLE door with 200 Amps rated bus bar, TPN, 4 ways, 240 Volts suitable for housing MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed. |
| 32 | Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed. |
| 33 | Supply and fixing as in repair factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 4 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed. |
| 34 | Supply and fixing as in repair MCCB, 125 Amp, four pole, 415 volts, breaking capacity 36KA fixed thermal and fixed magnetic setting complete all as specified and as directed. |
| 35 | Supply and fixing as in repair MCB, TPN, 415 volts, C Curve, 100 Amps, 10 KA, 4P complete all as specified and as directed. |
| 36 | Supply and fixing as in repair MCB, TPN, 415 volts, C Curve, 63 Amps, 10 KA, 4P complete all as specified and as directed. |
| 37 | Supply and fixing as in repair MCB, SPN, 240 volts, C Curve, 32 Amps, 10 KA complete all as specified and as directed. |
| 38 | Supply and fixing as in repair MCB, SP, 240 volts, C Curve, 6-32 Amps, 10 KA complete all as specified and as directed. |
| 39 | M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc including taking down old earthing complete all as specified and as directed. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd .[v]. GI protection pipe of size 15 mm bore light grade 7.5m. |
| 40 | Supply and fixing test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal headed screws including suitable sheet metal powder coated enclosure complete all as specified and directed. Please Enable Macros to View BoQ information |
