|
| 1 | Descirption |
| 2 | Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work. |
| 3 | Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in |
| 4 | foundation and plinth. |
| 5 | Providing and laying cement concrete 1:1½ :3 ( 1cement:1½ sand:3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 6 | foundation and plinth. |
| 7 | Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. |
| 8 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- |
| 9 | Flat surfaces such as soffits of suspended floors, roofs landings and the like |
| 10 | Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like. |
| 11 | Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 12 | suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level. |
| 13 | Prov. Mild steel/ tor steel reinforcement for RCC work including bending, binding and placing in position i /c binding wire complete up to floor two level |
| 14 | Pro. Smooth finishinf in cm 1:3 |
| 15 | Providing,Laying & Jointing in trenches GMS Tubes (Light Grade) Tube fittings (Earth work in trenches to be measured and paid for saprately) |
| 16 | 15 mm dia |
| 17 | 20 mm dia |
| 18 | 25 mm dia |
| 19 | 32 mm dia |
| 20 | 40 mm dia |
| 21 | 50 mm dia |
| 22 | 65 mm dia |
| 23 | 80 mm dia |
| 24 | Providing and fixing of brass full way wheel valve complete with all respect. |
| 25 | 15 mm dia |
| 26 | 20 mm dia |
| 27 | 25 mm dia |
| 28 | 32 mm dia |
| 29 | 40 mm dia |
| 30 | 50 mm dia |
| 31 | Making connection of Galvanside steel distribution branches with galvanised miled steel main 20mm to 40mm nomimal boor by P/F tee includeing Cutting & Threading the pipes complete |
| 32 | Electric welding with superior quality rod GI pipe of various dia to stop the leakage,including cutting of pipe if required alignment as per site with the help for Generator Set at site of work. 80 mm dia |
| 33 | Providing and supplying of GI Union diameter mentioned below in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. |
| 34 | 15 mm dia |
| 35 | 20 mm dia |
| 36 | 25 mm dia |
| 37 | 32 mm dia |
| 38 | 40 mm dia |
| 39 | Providing and supplying GI Socket diameter mentioned below in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. |
| 40 | 15 mm dia |
| 41 | 20 mm dia |
| 42 | 25 mm dia |
| 43 | 32 mm dia |
| 44 | 40 mm dia |
| 45 | Providing and supplying of GI Nipple diameter mentioned below in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. |
| 46 | 15 mm dia |
| 47 | 20 mm dia |
| 48 | 25 mm dia |
| 49 | 32 mm dia |
| 50 | 40 mm dia |
| 51 | Providing and supplying of Brass full way wheel valve diameter mentioned below in all leads and lifts and to the entire satisfaction of Engineer-in-Charge. |
| 52 | 15 mm dia |
| 53 | 20 mm dia |
| 54 | 25 mm dia |
| 55 | 32 mm dia |
| 56 | 40 mm dia Please Enable Macros to View BoQ information |
