|
| 1 | Description |
| 2 | Cutting in earth work in all classification of earth work such as pick work, jumper work, saturated soil,blasting soft/hard rock or chiselling soft/hard rock, where blasting work is prohibited in all lifts complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge . |
| 3 | Excavation in foundations, trenches etc. in earth work,lift uoto 1.50 metres stacking the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. Layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in lead of 20 metres. |
| 4 | Providing and laying cement concrete 1:4:8 (1 cement:4sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 5 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in : |
| 6 | Foundations, footings, bases of columns and the like and mass concrete. |
| 7 | Walls ( any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two level. |
| 8 | Providing and laying cement concrete 1:2:4 ( 1 cement : 2 Sand : 4 graded stone aggregate , 20 mm nominal size ) and curing complete excluding cost of form work and reinforcement in : |
| 9 | Suspended floor roofs, landing and shelves and their support balconies, beams,girders,bressumers and cantilevers up to floor two levels. |
| 10 | Providing tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. |
| 11 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish I/c centring , shuttering , strutting and proping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for insitu- reinforced concrete & plain concrete work in :- |
| 12 | Vertical surfaces such as walls (any thickness& shape), partitions and the like including attached pillasters, buttress,plinth and string courses and the like. |
| 13 | Flat surfaces such as soffits of suspended floors , roofs,landings and the like.Floors etc up to 200mm in thickness. |
| 14 | Edges of slab & breaks etc. |
| 15 | Prov. ,Laying, jointing of G.I. Pipes (light grade),tube fittings in trenches I/c earth work complete in inlet, out let and scour:- 40 mm dia |
| 16 | Prov .and fixing Gun Metal Gate Valves ordinarily split, taper edge, non rising spindle gate valves of class-I for cold service (temp not exceeding 45 degree C) screwed type as per IS 778-1984 in 40 mm dia (ISI Marked) |
| 17 | 40 mm diameter for inlet, outlet and scour : |
| 18 | Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undecorated wall surfaces (Two coat) to give an even shade after thoroughly brushing the surface to remove all dirt, loose powered materials. |
| 19 | Providing & fixing of MS manhole cover 60 X60 cm size with MS sheet 3.15 mm thick also with angle iron 40X40X3mm including cutting, welding, painting two coats with locking arrangement of reputed make Link/Harison Heavy Duty complete in all respect. |
| 20 | Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 21 | Excavation in drain channel etc. in earth work including dressing of sides and bed and disposing of excavated earth upto lead of 20 mtrs & lift up to 1.5 mtrs disposed earth to be levelled and neatly dressed as per engineer in charge. |
| 22 | Providing and fixing of distributer manifold (Junction) i/c all necessary GI fitting i.e. Gate valeve/wheel valve,Tee,elebow,union,nipple,ferrule etc i/c all leads and lifts. |
| 23 | Manufacturing and supplying of wheel valve M.S. chamber of size 450x450x600mm at M.S.plate 2mm thick duly welded with angle iron of 35x35x4mm thick and also providing extra length of 230mm of same angle (as tee) in the bottom of all four legs for embeding in cement concrete and top opening will provide with hings with locking arrangements also providing hole on three sides of chamber for crossing of different size of pipes as satisfaction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
