Tender For Establishment Of Fully Equipped Vocational Training Centre At Yokmuzur, West Kameng District, Bomdila-Arunachal Pradesh

TDR : 54861390

Tender Notice
BOQ

6 Days Left

Bomdila , Arunachal Pradesh

Tender Brief : Tender For Establishment Of Fully Equipped Vocational Training Centre At Yokmuzur, West Kameng District

Document Fees
₹ 3000 /-

EMD
₹ 234000.0 /-

Tender Value
Refer document

Submission Date
03-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	SH :- Procurement and installation of machineries and tools for the vocational training centre.
2	Sheltifur pose combined planner mechine with 3 HP single face motor , belt and pulley fitting complete.
3	12'' vertically band saw mechine complete with 3 HP single phase motor belt and pulley
4	24'' Table Jigsaw machine with1 HP single phase motor ,belt and pulley fitting
5	Wood working lathe machene complete with 2 HP single phase motor , Belt and pulley fitting
6	Grinding mechine & 1 HP single phase motor with fitting
7	14'' pipe cutter mechine
8	200 LBs Capacity air compressor with 1 HP motor double piston head
9	Hand Router mechine
10	Hand Jigsaw mechine
11	Hand planner
12	Hand Circular saw 7'' (185 mm)
13	100 mm hand angle grinder
14	Hand die grinder
15	Hand screwdriver drill mechine
16	Hand drill plastic body small size
17	Heavy duty 13 mm hand drill mechine
18	Heating Torch
19	Chain Saw(16''- 170)
20	Chain Saw (18''-180)
21	Chain Saw920'' -250)
22	Chain Saw (25''-382)
23	Band saw mechine Accessories( Blade,Air blower, stone Etc)
24	Router Bit set( 12 Pcs Box)
25	Table Jig saw Blade (50 Pcs Pkt)
26	Hand Jig saw Blade (5 Patta)
27	185 mm Diomond circular saw
28	14''Cutting stone (25 Pcs Box)
29	4'' Cutting stone ( 50 Pcs Box)
30	4'' anglestone (25 pcs Box)
31	14 Tet Diamond blade
32	Hand tools( All Type Dall and Ring spanner, adjustable slice wrench, , hammer, vice etc)
33	Singer SE 9185 Computarized embroidary sewing mechine
34	Singer 6700C heavy duty sewingMechine
35	Various moulds ( fiber make samples )
36	Add carriage from Guwahaty to Yokmuzor 280 Km
37	SH: Const. of Display Store
38	I. RCC Work
39	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :b) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
40	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
41	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
42	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
43	Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete.
44	c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
45	d) Lintels, beams, girders, bressumers and cantilevers etc.
46	e) Column, pillars, posts and struts etc.
47	Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars.
48	II. Brick Work
49	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
50	Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.
51	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
52	III. Wood work
53	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
54	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I
55	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I
56	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill.
57	Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm
58	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.a) 300 x 10 mm
59	c) 150 x 10 mm
60	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a) 125 mm
61	IV. Flooring
62	25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
63	Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 Course sand ) Finish with a floating coat of neat cement, including rounding of junctions with floor: a) 18mm thick
64	V. Finishing
65	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
66	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
67	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
68	Applying one coat of distemper primer of approved brand and manufacture on wall surface.
69	Painting two or more coats with enamel paint of approved brand and manufacture in any shade on new work to give even shade
70	Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade.
71	VI. Miscelleneous
72	Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
73	Providing and fixing of stainless steel railing of best quality and approved brand including accessories and fittings.
74	Add Carriage Charges
75	VII. Drainage
76	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
77	VIII. Electrification
78	(A) WIRING
79	Wiring for light point with 1.5 Sq. mm. PVC insulated multistrand copper conductor insurface PVC conduit etc. as required:a. Short point
80	b. Medium point
81	c. Long point
82	Wiring for fan point with 1.5 Sq. mm. PVC insulated copper conductor multistrand cable in surface PVC conduit etc. as required:b. Medium point
83	Wiring for circuit/Sub-main wiring with following size of FR PVC insulated multistrand copper conductor cable in surface PVC condiut etc. as required.a. 2x2.5sqmm+1x2.5sqmm earth wire
84	b. 2x4sqmm+1x4sqmm earth wire
85	c. 2x6sqmm+1x6sqmm earth wire
86	Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess i/c cutting the wall and amking good the same in case of recessed conduit as required:a. 25 mm
87	b. 40mm
88	Installation, testing and commissioning of pre-wired, fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with flexible wire and earthing etc. as required.
89	Installation, testing and ommissioning of ceiling fan i/c wiring the down rods of standard length (upto 30 cm) with flexible wire etc. as required.
90	Installation, testing & commissioning of reistance type ceiling fan regulator in existing switch box including connection with 1.5 sqmm FR PVC insulated Copper conductor, single core cable ,earthing the regulator etc as reqd.
91	Supplying and fixing of 3pin, 5amp ceiling rose on the existing junction box/ wooden block including connection etc as reqd.
92	Supplying and fixing of of brass batten/angle holder including connection etc as reqd.
93	Installation of exhaust fan in the existing opening including making good the damage, connection, testing, commissioning etc as reqd.a. Upto 510 mm Sweep
94	Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes
95	Supplying & fixing of following ways surface/recess mounting horizontal type 415V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted , tinned copper bus bar, common neutral link earth bar, din bar for mounting MCB's( but without MCB/RCCB/Isolator)a. 8way(4+24), Single door
96	(B) Fans & Fittings:
97	4'-22watt Endura LED tube fitting complete with all accessories ( Havells Make)
98	1200 mm Sweep A. C. Ceiling Fan.
99	Electronic fan regulator
100	1.5 Sq. mm. multi strand PVC insulated copper conductor
101	2.5 Sq. mm. multi strand PVC insulated copper conductor
102	4 Sq. mm. multi strand PVC insulated copper conductor
103	6 Sq. mm. multi strand PVC insulated copper conductor
104	Flexible copper wire
105	PVC tape 25 mtr. long
106	Supplying and fixing of 10 Amp. Piano type switch i/c connections etc. as required.
107	Supplying and fixing of 5/6 Amp. Socket outlet i/c connections etc. as required.
108	Supplying and fixing of 15/16 Amp. Piano type switch i/c connections etc. as required.
109	Supplying and fixing of 6 pin 15/16 Amp. Socket outlet i/c connections etc. as required.
110	Supplying of MCB's and isolator of following capacitya. 6Amp-32Amp, SP MCB, \\"C\\" Curve 10KA
111	b. 6Amp-32Amp, DP MCB, \\"C\\" Curve 10KA
112	c. 6Amp-32Amp, TPN MCB, \\"C\\" Curve 10KA
113	Plastic Board of following sizea. 2\\"x 2\\"
114	b. 6\\"x8\\"
115	25 mm Plastic/Wooden Gutka
116	Machine screw of the following sizes:a. 25 mm
117	b. 35 mm
118	Exhaust fan of 300 mm sweep i/c connection etc. as required.
119	PHILIPS MAKE LED bulb 14 watt (Warm White)
120	SH: Const. of 20 Bedded Hostel Building
121	I. Earthwork
122	Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning t
123	II. CC Work
124	Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
125	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
126	III. RCC Work
127	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :b) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
128	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
129	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
130	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
131	Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete.
132	c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
133	d) Lintels, beams, girders, bressumers and cantilevers etc.
134	e) Column, pillars, posts and struts etc.
135	Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars.
136	IV. Brick Work
137	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
138	Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.
139	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
140	V. Wood work
141	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
142	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I
143	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I
144	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill.
145	Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm
146	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.a) 300 x 10 mm
147	c) 150 x 10 mm
148	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a) 125 mm
149	VI. Flooring
150	25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
151	Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 Course sand ) Finish with a floating coat of neat cement, including rounding of junctions with floor: a) 18mm thick
152	VII. Finishing
153	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
154	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
155	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
156	Applying one coat of distemper primer of approved brand and manufacture on wall surface.
157	Painting two or more coats with enamel paint of approved brand and manufacture in any shade on new work to give even shade
158	Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade.
159	VIII. Miscelleneous
160	Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
161	Providing and fixing of stainless steel railing of best quality and approved brand including accessories and fittings.
162	IX. Drainage
163	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
164	Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
165	X. Water Supply
166	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore
167	b) 20 mm nominal bore
168	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 15 mm nominal bore
169	b) 20 mm nominal bore
170	d) 32 mm nominal bore
171	Providing and fixing brass bib cock of approved quality.a)15 mm nominal bore
172	Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore
173	Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet.a) 100 mm dia
174	XI. Sanitary Installations
175	Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.a) Long Pan patten WC Pan
176	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.b) Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality.
177	Providing and fixing kitchen sink including making all connection excluding cost of fittings.a) White glazed fire clay sink size 600x450x150 mm
178	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
179	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 100 mm dia
180	c) 50 mm dia
181	Providing and fixing sand cast iron heel rest sanitary bend.a) 100 mm dia
182	Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.a) 100 x 100 x 100 mm
183	Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.c) 100 mm inlet and 50 mm outlet
184	Add Carriage Charges
185	XII. Electrification
186	(A) WIRING
187	Wiring for light point with 1.5 Sq. mm. PVC insulated multistrand copper conductor insurface PVC conduit etc. as required:a. Short point
188	b. Medium point
189	c. Long point
190	Wiring for fan point with 1.5 Sq. mm. PVC insulated copper conductor multistrand cable in surface PVC conduit etc. as required:b. Medium point
191	Wiring for circuit/Sub-main wiring with following size of FR PVC insulated multistrand copper conductor cable in surface PVC condiut etc. as required.a. 2x2.5sqmm+1x2.5sqmm earth wire
192	b. 2x4sqmm+1x4sqmm earth wire
193	c. 2x6sqmm+1x6sqmm earth wire
194	Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess i/c cutting the wall and amking good the same in case of recessed conduit as required:a. 25 mm
195	b. 40mm
196	Installation, testing and commissioning of pre-wired, fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with flexible wire and earthing etc. as required.
197	Installation, testing and ommissioning of ceiling fan i/c wiring the down rods of standard length (upto 30 cm) with flexible wire etc. as required.
198	Installation, testing & commissioning of reistance type ceiling fan regulator in existing switch box including connection with 1.5 sqmm FR PVC insulated Copper conductor, single core cable ,earthing the regulator etc as reqd.
199	Supplying and fixing of 3pin, 5amp ceiling rose on the existing junction box/ wooden block including connection etc as reqd.
200	Supplying and fixing of of brass batten/angle holder including connection etc as reqd.
201	Installation of exhaust fan in the existing opening including making good the damage, connection, testing, commissioning etc as reqd.a. Upto 510 mm Sweep
202	Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes
203	Supplying & fixing of following ways surface/recess mounting horizontal type 415V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted , tinned copper bus bar, common neutral link earth bar, din bar for mounting MCB's( but without MCB/RCCB/Isolator)a. 8way(4+24), Single door
204	(B) Fans & Fittings:
205	4'-22watt Endura LED tube fitting complete with all accessories ( Havells Make)
206	1200 mm Sweep A. C. Ceiling Fan.
207	Electronic fan regulator
208	1.5 Sq. mm. multi strand PVC insulated copper conductor
209	2.5 Sq. mm. multi strand PVC insulated copper conductor
210	4 Sq. mm. multi strand PVC insulated copper conductor
211	6 Sq. mm. multi strand PVC insulated copper conductor
212	Flexible copper wire
213	PVC tape 25 mtr. long
214	Supplying and fixing of 10 Amp. Piano type switch i/c connections etc. as required.
215	Supplying and fixing of 5/6 Amp. Socket outlet i/c connections etc. as required.
216	Supplying and fixing of 15/16 Amp. Piano type switch i/c connections etc. as required.
217	Supplying and fixing of 6 pin 15/16 Amp. Socket outlet i/c connections etc. as required.
218	Supplying of MCB's and isolator of following capacitya. 6Amp-32Amp, SP MCB, \\"C\\" Curve 10KA
219	b. 6Amp-32Amp, DP MCB, \\"C\\" Curve 10KA
220	c. 6Amp-32Amp, TPN MCB, \\"C\\" Curve 10KA
221	Plastic Board of following sizea. 2\\"x 2\\"
222	b. 6\\"x8\\"
223	25 mm Plastic/Wooden Gutka
224	Machine screw of the following sizes:a. 25 mm
225	b. 35 mm
226	Exhaust fan of 300 mm sweep i/c connection etc. as required.
227	PHILIPS MAKE LED bulb 14 watt (Warm White)
228	(C) Earthing:
229	600 x 600 x 4 mm thick (10.5 kG) Copper plate as required
230	Supplying and laying 25x5 mm Copper Strip at 0.5mtr below ground as strip earth electrode, including connection/terminating with nut, bolt,spring,washer as required.(Jointing will be done by overlapping and with 02 sets of brass nut bolt and spring washer spaced at 50mm).
231	Copper shaddle as required.
232	Earthing with copper earth plate 600x600x3 mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as required.
233	Extra for using salt and coke for copper plate earthing as required.
234	SH: Const. of Workshop Building
235	I. Earthwork
236	Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning t
237	II. CC Work
238	Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.
239	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
240	III. RCC Work
241	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :b) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
242	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
243	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
244	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.b) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
245	Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete.
246	c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).
247	d) Lintels, beams, girders, bressumers and cantilevers etc.
248	e) Column, pillars, posts and struts etc.
249	Reinforcement of RCC work including bending, binding and placing in position complete.b) Cold twisted bars.
250	IV. Brick Work
251	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
252	Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.
253	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
254	V. Wood work
255	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
256	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I
257	Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws.a) 38 mm thick best available local wood, class - B I
258	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill.
259	Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete.a) 300 x 16 mm
260	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete.a) 300 x 10 mm
261	c) 150 x 10 mm
262	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a) 125 mm
263	VI. Flooring
264	25 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floating coat of neat cement.
265	Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 Course sand ) Finish with a floating coat of neat cement, including rounding of junctions with floor: a) 18mm thick
266	VII. Finishing
267	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
268	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
269	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
270	Applying one coat of distemper primer of approved brand and manufacture on wall surface.
271	Painting two or more coats with enamel paint of approved brand and manufacture in any shade on new work to give even shade
272	Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade.
273	VIII. Miscelleneous
274	Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).
275	Providing and fixing of stainless steel railing of best quality and approved brand including accessories and fittings.
276	IX. Drainage
277	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
278	Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design.
279	X. Water Supply
280	Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work).a) 15 mm nominal bore
281	b) 20 mm nominal bore
282	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 15 mm nominal bore
283	b) 20 mm nominal bore
284	d) 32 mm nominal bore
285	Providing and fixing brass bib cock of approved quality.a)15 mm nominal bore
286	Providing and fixing brass stop cock of approved quality.a) 15 mm nominal bore
287	Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet.a) 100 mm dia
288	XI. Sanitary Installations
289	Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required.a) Long Pan patten WC Pan
290	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required.b) Flat back wash basin size 550x400 mm with single 15 mm CP brass pillar taps of heavy quality.
291	Providing and fixing kitchen sink including making all connection excluding cost of fittings.a) White glazed fire clay sink size 600x450x150 mm
292	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap.
293	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 100 mm dia
294	c) 50 mm dia
295	Providing and fixing sand cast iron heel rest sanitary bend.a) 100 mm dia
296	Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.a) 100 x 100 x 100 mm
297	Providing and fixing sand cast iron trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.c) 100 mm inlet and 50 mm outlet
298	Add Carriage Charges
299	XII. Electrification
300	(A) WIRING
301	Wiring for light point with 1.5 Sq. mm. PVC insulated multistrand copper conductor insurface PVC conduit etc. as required:a. Short point
302	b. Medium point
303	c. Long point
304	Wiring for fan point with 1.5 Sq. mm. PVC insulated copper conductor multistrand cable in surface PVC conduit etc. as required:b. Medium point
305	Wiring for circuit/Sub-main wiring with following size of FR PVC insulated multistrand copper conductor cable in surface PVC condiut etc. as required.A. 2x2.5sqmm+1x2.5sqmm earth wire
306	b. 2x4sqmm+1x4sqmm earth wire
307	c. 2x6sqmm+1x6sqmm earth wire
308	Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess i/c cutting the wall and amking good the same in case of recessed conduit as required:a. 25 mm
309	b. 40mm
310	Installation, testing and commissioning of pre-wired, fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/wall, including connection with flexible wire and earthing etc. as required.
311	Installation, testing and ommissioning of ceiling fan i/c wiring the down rods of standard length (upto 30 cm) with flexible wire etc. as required.
312	Installation, testing & commissioning of reistance type ceiling fan regulator in existing switch box including connection with 1.5 sqmm FR PVC insulated Copper conductor, single core cable ,earthing the regulator etc as reqd.
313	Supplying and fixing of 3pin, 5amp ceiling rose on the existing junction box/ wooden block including connection etc as reqd.
314	Supplying and fixing of of brass batten/angle holder including connection etc as reqd.
315	Installation of exhaust fan in the existing opening including making good the damage, connection, testing, commissioning etc as reqd.a. Upto 510 mm Sweep
316	Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes
317	Supplying & fixing of following ways surface/recess mounting horizontal type 415V, TPN MCB distribution board of sheet steel,dust protected, duly powder painted , tinned copper bus bar, common neutral link earth bar, din bar for mounting MCB's( but without MCB/RCCB/Isolator)a. 8way(4+24), Single door
318	(B) Fans & Fittings:
319	4'-22watt Endura LED tube fitting complete with all accessories ( Havells Make)
320	1200 mm Sweep A. C. Ceiling Fan.
321	Electronic fan regulator
322	1.5 Sq. mm. multi strand PVC insulated copper conductor
323	2.5 Sq. mm. multi strand PVC insulated copper conductor
324	4 Sq. mm. multi strand PVC insulated copper conductor
325	6 Sq. mm. multi strand PVC insulated copper conductor
326	Flexible copper wire
327	PVC tape 25 mtr. long
328	Supplying and fixing of 10 Amp. Piano type switch i/c connections etc. as required.
329	Supplying and fixing of 5/6 Amp. Socket outlet i/c connections etc. as required.
330	Supplying and fixing of 15/16 Amp. Piano type switch i/c connections etc. as required.
331	Supplying and fixing of 6 pin 15/16 Amp. Socket outlet i/c connections etc. as required.
332	Supplying of MCB's and isolator of following capacitya. 6Amp-32Amp, SP MCB, \\"C\\" Curve 10KA
333	b. 6Amp-32Amp, DP MCB, \\"C\\" Curve 10KA
334	c. 6Amp-32Amp, TPN MCB, \\"C\\" Curve 10KA
335	Plastic Board of following sizea. 2\\"x 2\\"
336	b. 6\\"x8\\"
337	25 mm Plastic/Wooden Gutka
338	Machine screw of the following sizes:a. 25 mm
339	b. 35 mm
340	Exhaust fan of 300 mm sweep i/c connection etc. as required.
341	PHILIPS MAKE LED bulb 14 watt (Warm White)
342	(C) Earthing:
343	600 x 600 x 4 mm thick (10.5 kG) Copper plate as required
344	Supplying and laying 25x5 mm Copper Strip at 0.5mtr below ground as strip earth electrode, including connection/terminating with nut, bolt,spring,washer as required.(Jointing will be done by overlapping and with 02 sets of brass nut bolt and spring washer spaced at 50mm).
345	Copper shaddle as required.
346	Earthing with copper earth plate 600x600x3 mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as required.
347	Extra for using salt and coke for copper plate earthing as required.
348	SH :- C/o Protection wall (3 Mtr Ht) - 50.00 Mtr.
349	Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work.i) Ordinary Soil
350	ii) Ordinary Rock (not requiring blasting)
351	PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)
352	Stone Masonry Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications.a) Random Rubble Masonry
353	Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification Granular material
354	Providing weep hole
355	Carriage charges
356	SH :- C/o CC Step (4.00 mtr wide and 10 Mtr length) - 136.00 Mtr.
357	Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.a) Ordinary Soil
358	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :a) Foundations and plinth
359	Centering and shuttering in F&P
360	Providing and laying Ceramic glazed floor tiles 300x300 mm of 1 St Quality ..laid on 20 mmthick CM 1.4 … complete
361	CARRIAGE OF MATERIALS
362	SH: - C/o Guard Rail - 136.00 Mtr.
363	1. EARTH WORK
364	Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.a) Ordinary Soil
365	b) Hard Soil
366	2. CEMENT CONCRETE
367	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :a) Foundations and plinth
368	3. RCC WORK
369	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
370	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).b) Column, pillars, posts and struts etc.
371	Centring and shuttering i/c strutting, etc and removal of form work for : columns
372	Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/TMT steel
373	4. DISTEMPERING
374	Applying one coat of cement primer of approved brand and manufacture on wall surface.
375	Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on new work to give an even shade.
376	5.STEEL WORKS
377	Providing and fixing ornamental Grill of required pattern with MS squre tubes i/c priming, painting etc complete.
378	CARRIAGE OF MATERIALS Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Arunachal Pradesh Tenders

Services Tenders

Education and Training Services Tenders

Vocational Training Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Establishment Of Fully Equipped Vocational Training Centre At Yokmuzur, West Kameng District, Bomdila-Arunachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Establishment Of Fully Equipped Vocational Training Centre At Yokmuzur, West Kameng District, Bomdila-Arunachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us