|
| 1 | Viewing Deck |
| 2 | Earth Work in excavation of foundation all kinds of soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect |
| 3 | Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete. |
| 4 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 5 | R.C.C work of M-25 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Including centering & shuttering) |
| 6 | pile cap |
| 7 | Plinth Beam |
| 8 | Ground floor(Column / Beam) |
| 9 | Ground floor(Slab) |
| 10 | Ground floor(Chajja) |
| 11 | Single under reamed pile foundation with RCC M25 using 20 mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.Single under ream pile |
| 12 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 13 | Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
| 14 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 15 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 16 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 17 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 18 | S/F/F of virtified floor tiles of premium grade having thickness 8mm to 10mm( 60cm x 60cm colour / priented series ) |
| 19 | Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete |
| 20 | S/F/F of virtified dado tiles of premium grade having thickness 8mm to 10mm ( 60cm x 60cm colour / priented series ) |
| 21 | Finishing wall surface of walls with Acrylic wall putty / Plaster of paris (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. |
| 22 | Priming one coat with any approved primer WALL SURFACE (PLASTERED SURFACE) |
| 23 | Two coats with plastic emulsion paint of approved shade on new work to give an even shed.Per 1sqm. |
| 24 | Wall painting 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
| 25 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. |
| 26 | Carraige of earth by mecahnical means with cost of all lead & lift upto 5Km. including cost of all labour,T&P etc complete. |
| 27 | Parking & Pathway Deck |
| 28 | Earth Work in excavation of foundation all kinds of soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect |
| 29 | Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete. |
| 30 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 31 | R.C.C work of M-25 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Including centering & shuttering) |
| 32 | pile cap |
| 33 | Plinth Beam |
| 34 | Column / Beam |
| 35 | Single under reamed pile foundation with RCC M25 using 20 mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.Single under ream pile |
| 36 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 37 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 38 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 39 | Finishing wall surface of walls with Acrylic wall putty / Plaster of paris (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. |
| 40 | Priming one coat with any approved primer WALL SURFACE (PLASTERED SURFACE) |
| 41 | Two coats with plastic emulsion paint of approved shade on new work to give an even shed.Per 1sqm. |
| 42 | Wall painting 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
| 43 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. |
| 44 | Carraige of earth by mecahnical means with cost of all lead & lift upto 5Km. including cost of all labour,T&P etc complete. |
| 45 | Shops cum Food court 5 No. |
| 46 | R.C.C work of M-25 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Including centering & shuttering) |
| 47 | Plinth Beam |
| 48 | Ground floor |
| 49 | Chajja |
| 50 | Single under reamed pile foundation with RCC M25 using 20 mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.Single under ream pile |
| 51 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 52 | Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
| 53 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 54 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 55 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 56 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 57 | S/F/F of virtified floor tiles of premium grade having thickness 8mm to 10mm ( 60cm x 60cm colour / priented series ) |
| 58 | Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 59 | S/F/F of virtified dado tiles of premium grade having thickness 8mm to 10mm ( 60cm x 60cm colour / priented series ) |
| 60 | Finishing wall surface of walls with Acrylic wall putty / Plaster of paris (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. |
| 61 | Priming one coat with any approved primer WALL SURFACE (PLASTERED SURFACE) |
| 62 | Two coats with plastic emulsion paint of approved shade on new work to give an even shed.Per 1sqm. |
| 63 | Wall painting 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
| 64 | Supplying, fitting, fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame , shutters and all fitting and fixture |
| 65 | Supplying, fitting & fixing of M.S framed Grills, wherever requied. The Cost includes, cutouts, drilling, screws etc. complete |
| 66 | Painting two coats over a coat of priming over new Iron work with the cost of primer & paint. |
| 67 | Supplying and fixing rolling shutters of approved make made out of 80x1.25 mm MS laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shafts with brackets , side guides, and arangements for inside and outside locking with push and pull operation complete including cost of providing and fixing necessary 27.5cm long wire springs grade no.2 and MS top cover 1.25 mm thick for rolling shutters including cost of one cote of zinc chromate primer and two coat of enamel paint. |
| 68 | JETTY |
| 69 | Earth Work in excavation of foundation all kinds of soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect |
| 70 | Supplying & filling foundation and plinth with course sand well watered and rammed including cost, cost of all labour, carriage, royalty, etc complete. |
| 71 | C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C |
| 72 | R.C.C work of M-25 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Including centering & shuttering) |
| 73 | pile cap |
| 74 | Plinth Beam |
| 75 | Column / Beam |
| 76 | Single under reamed pile foundation with RCC M25 using 20 mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.Single under ream pile |
| 77 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 78 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 79 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 80 | Finishing wall surface of walls with Acrylic wall putty / Plaster of paris (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. |
| 81 | Priming one coat with any approved primer WALL SURFACE (PLASTERED SURFACE) |
| 82 | Two coats with plastic emulsion paint of approved shade on new work to give an even shed.Per 1sqm. |
| 83 | Wall painting 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
| 84 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. |
| 85 | Carraige of earth by mecahnical means with cost of all lead & lift upto 5Km. including cost of all labour,T&P etc complete. |
| 86 | BOAT HOUSE |
| 87 | R.C.C work of M-25 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Including centering & shuttering) |
| 88 | Plinth Beam |
| 89 | Column / Beam |
| 90 | Chajja |
| 91 | Single under reamed pile foundation with RCC M25 using 20 mm size black hard granite (Crusher broken) stone chips including cost of boring but excluding cost of M.S./Tor steel and labour charges for cutting, bending and binding of steel.Single under ream pile 375 mm , 6 m depth |
| 92 | Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge |
| 93 | Brick work with Fly ash Bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
| 94 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C |
| 95 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 96 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 97 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 98 | S/F/F of virtified floor tiles of premium grade having thickness 8mm to 10mm ( 60cm x 60cm colour / priented series ) |
| 99 | Fixing tiles in dados on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 100 | S/F/F of virtified dado tiles of premium grade having thickness 8mm to 10mm ( 60cm x 60cm colour / priented series ) |
| 101 | Finishing wall surface of walls with Acrylic wall putty / Plaster of paris (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete. |
| 102 | Priming one coat with any approved primer WALL SURFACE (PLASTERED SURFACE) |
| 103 | Two coats with plastic emulsion paint of approved shade on new work to give an even shed.Per 1sqm. |
| 104 | Wall painting 2 uniform coats with weather coat paint of approved shade on new work to give an even shade |
| 105 | Supplying, fitting, fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame , shutters and all fitting and fixture |
| 106 | Supplying, fitting & fixing of M.S framed Grills, wherever requied. The Cost includes, cutouts, drilling, screws etc. complete |
| 107 | Painting two coats over a coat of priming over new Iron work with the cost of primer & paint. |
| 108 | Supplying and fixing rolling shutters of approved make made out of 80x1.25 mm MS laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shafts with brackets , side guides, and arangements for inside and outside locking with push and pull operation complete including cost of providing and fixing necessary 27.5cm long wire springs grade no.2 and MS top cover 1.25 mm thick for rolling shutters including cost of one cote of zinc chromate primer and two coat of enamel paint. |
| 109 | Dewatering-Deweeding |
| 110 | Dewatering-Supplying all materials labours t&p 5.00HP Disel Pumpset with POL, Pump operator etc. and dewatering the clwar water / muddy water etc all complete as per the required specification and direction of engineer in charge. |
| 111 | Deweeding-Uproting rank vegitation and weeds by digging the ares to a depth of 60 cm, removing all weeds and other growth roots by forking repeatedly breaking clods rough dressing flooding with water uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grasses etc as per required specificatio and direction of engineer in charge |
| 112 | Desilting- supplyinbg all materials labour T&P excavation of any type of soil by mechanical means loading into ans transportayion by mechanical means and unloading the soil with the pond area on proerlly prepared and scientifically aproved surface including spreeding and lavelling (Note-100% Desilting requires to be execuited without any compromise) |
| 113 | Supplying all materials labour T&Pfor excavation of any available types of soil by mechanical means loading into a transportaion by mechanical means and unloading the soil upto 5KM lead in low laying govt. land identified by ULB inclusing spreading and lavelling the earth with construction, maintanance, watering and lighting of haul road and borrow area wtc. complete as per the required specification and direction of EIC. Please Enable Macros to View BoQ information |
