Tender For Restoration Of Damaged Structure Handed Over To Department Of Education At Chharabra (Shimla) Under Section 118 Of The Himachal Pradesg Tenancy And Land Reforms Act 1972, By Deputy Commissioner Shimla. (Sh:- Repair And Maintenance Of Civil, Shimla-Himachal Pradesh

TDR : 54857181

Tender Notice
BOQ

2 Days Left

Shimla , Himachal Pradesh

Tender Brief : Tender For Restoration Of Damaged Structure Handed Over To Department Of Education At Chharabra (Shimla) Under Section 118 Of The Himachal Pradesg Tenancy And Land Reforms Act 1972, By Deputy Commissioner Shimla. (Sh:- Repair And Maintenance Of Civil

Document Fees
₹ 2000 /-

EMD
₹ 194000.0 /-

Tender Value
Refer document

Submission Date
01-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavating trenches of required width for pipes, cables, etcetra including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m (One point five metre), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetres) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m (Fifty metre) Pipes, cables etc. exceeding 80 mm (Eighty milimetres) dia. but not exceeding 300 mm (Three hundred milimetres) dia complete in all respect including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
2	Demolishing cement concrete 1:4:8 (one cement isto four sand isto eight graded / crushedd stone aggregate) or leaner mix (including equivalent design mix) manually/ by mechanical means including disposal of material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
3	Demolishing brick work manually/ by mechanical means in cement mortar including stacking of serviceable material and disposal of material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
4	Taking out doors, windows and clerestory window shutters (steel or wood) 3 (three) square metres and below including stacking of serviceable material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
5	Taking out doors, windows and clerestory window shutters (steel or wood) area beyond 3 (three) square metres including stacking of serviceable material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
6	Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
7	Dismantling tile work For thickness of tiles upto any thickness in floors and roofs laid in cement mortar including stacking the material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
8	Dismantling roofing including ridges, hips, valleys and gutters etcwtra and stacking the material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
9	Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable of material as directed by the Engineer-In-Charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
10	Providing and laying in position cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and vibrated curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
11	Coursed rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (One cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
12	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
13	Brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
14	Providing 2nd (second) class deodar wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
15	Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
16	Providing and fixing 1st (first) class deodar wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
17	Providingaaaand fixing pine wood readymade plain framed panelling with necessary screw priming coat on unexposed surfac including carriage of mateirals in all leads and lifts as per directions of the Engineer-in-Charge.(i) 2nd Pine wood .The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
18	Providing and fixing 12mm thick ply board in water for shelves/box modular kitchen butt joints & fixing with nails & screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
19	Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
20	Providing and fixing built up UPVC casement double tractor windows profile sepcification outer frame - 12601( 110mm x60mm) Sash -12617( 80mmx60mm) Z Mullion -3086 beading 22mm x18mm Coupling - 12358 (70mm ) including shitter with chamber thicness 2.60mm and GI frame thicness 1.20mm to 2.00mm and 6.00mm + 12mm +6.00 DGU toughned double glass gap filled with argon gas fixed with thermoplastic elastomer (TPE) gasket including fly mess Zin allay casement handle , Friction stay /2D hinges /but hinges , espag multipoint locking system locking strickers as per approved colured complete as per approved complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
21	Providing and fixing M.S. grills of required pattern in frames of windows etcetra with M.S. flats, square or round bars etcetra including priming coat with approved steel primer all complete fixed to steel windows by welding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
22	Providing and fixing 40mm (forty millimetre) thick panelled and glazed shutters of First class deodar wood for doors having 12mm (twelve millimetre) thick both side prelaminated water proof particle board infill panel of Action / Tesa / Century / Kitlam below lock rail and 6mm thick glazing of Modigaurd above lock rail including black enamelled iron butt hinges with necessary screws including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
23	Providing and fixing 40mm (forty millimetre) thick 2nd (second) class deodar wood glazed shutters with glass panes of 5mm ( Five milimetre) thick plain glass weight not less than 12.50Kg/M2 (twelve point five zero Kilogramme per square metre) of Modiguard / Saint Gobian for shutters with putty and nails complete, for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
24	Providing and fixing 40mm (forty millimetre) thick 2nd (second) class deodar wood Fly proof stainless steel 32 (thirty) gauge of grade 304 wire gauge with 0.5 mm diametre (zero point five millimetre) wire and 1.4 mm (one point four millimetre) wide aperture with 144 (one hundred forty four) holes per square inch with matching wood beading for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
25	Providing and fixing 40mm (forty millimetre) thick 2nd (second) class deodar wood glazed shutters with frosted glass panes of 5mm ( Five milimetre) thick weight not less than 12.50Kg/M2 (twelve point five zero Kilogramme per square metre) of Modiguard / Saint Gobian for shutters with putty and nails complete, for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
26	Providing and fixing Glazing with glass panes of 5mm ( Five milimetre) thick plain glass weight not less than 12.50Kg/M2 (Thirteen point seven five Kilogramme per square metre) of Modiguard / Saint Gobian glazing in steel door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
27	Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (a) For Idoors windows and ventilatiors and glazed partitions frames.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
28	Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves. Back side of cup board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply. All the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm ( one millimetre) thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers,knob megnatic catcher complete, (outer face of the cupboard shall be measure for payment) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
29	Providing and fixing cup-board shutter magnetic catcher with necessary screws etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
30	Providing and fixing 65x35mm (Sixty five into thirty five milllimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
31	Providing and fixing Stainlesss steel curtain rail with rollers stop ends and brackets in pelmets with curtain rod of 25mm (Twenty five millimetres) dia and brackets complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
32	Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) size aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
33	Providing and fixing 250x16mm (two hundred fifty into Sixteen millimetres) size aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
34	Providing and fixing 250x10mm (Two hundred fifty into Ten millimetres) nominal size aluminium Pilot/sheel tower bolt (Barrel type) of required colour and shade with necessary screws etcetra bright finished or black enameled with nuts and screws etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
35	Providing and fixing 150x10mm (One hundred fifty into Ten millimetres) nominal size aluminium Pilot/sheel tower bolt (Barrel type) of required colour and shade with necessary screws etcetra bright finished or black enameled with nuts and screws etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
36	Providing and fixing 150mm (One hundred fifty millimetres) nominal size aluminium Pilot/sheel handles to required colour or shade with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
37	Providing and fixing 125mm (One hundred twenty five millimetres) nominal size aluminium Pilot/sheel handles to required colour or shade with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
38	Providing and fixing aluminium PILOT/Sheel 250 mm (Two hundred fifty millimetres) size hooks and eyes complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
39	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS No. 3564, embossed on the body, door weight upto 35 kg ( thirty five kilogram) and door width upto 700 mm ( seven hundred milimetres), with necessary accessories and screws etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
40	Providing and fixing aluminium hanging twin rubber floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etcetra complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
41	Providing and laying 600x 600mm x 10mm (Six hundred into six hundred millimetre) into ten millimetre thick Double Charge vetrified tiles of Kajaria / Orient -Bell / Nitco or its equivalent of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42	Providing and laying 300X300 mm (three hundred millimetre into three hundred millimetre) Matt finish antiskid ceremic tiles of premium quality of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring in cement mortar 1:3 (one cement isto three sand laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
43	Providing and laying 450x300 mm (four hundred fifty into three hundred millimetre) white Glazed Tiles Dado Of Kajaria / Orient & Bell / Nitco or its equivalent with cement mortar over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
44	Providing and fixing 1.8mm (one point eight millimetre) thick vinyl flooring over CC flooring, ISI marked IS No 3462/1986 of wonder / LG /Unitex floor of approved shade & Sample with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
45	Rubbing of Kota stone slab flooring complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
46	Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters etc. laid over 20mm thick base cement mortar 1:4.(one cement: four sand) joints treated with white cement mixed with matching pigment , epoxy touch ups, including rubbing curing, moulding and polishing to edges to give high gloss finish etc. (i) Granite of any colour and shade including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
47	Providing double edge nosing/moulding to 18mm thick Kota stone counters, Vanities etc incluing machine polishing to edge to give hogh gloss finish etc. complete as per design approved by the Engineer in charge i) Kota stone/ Marble work including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
48	Providing and Fixing Loope pile carpet over existing cement concrete flooring complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
49	Providing and laying 19 mm (nineteen millimetre) thick Polished Grey Chima Pink Granite Stone having Semi / Round nosing in work top of Pantary / under counter wash basin and water trough laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50	Providing and fixing 600x600x6mm (Six hundred into six hundred into six millimetres) Everest fibre cement board ceiling panel with pre-painted GI channel framing @ 600mm (six hundred millimetres) centre to centre complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
51	Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty millimetres) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6 mm (Six millimetres) dia & prepainted G.I. limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
52	Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
53	Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted limpet and rubber washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
54	Providing and fixing 30cm (Thirty Centimetre) wide 25cm (Twenty five centimetre) deep 0.60mm (Zero point six zero millimetres) thick prepainted plain P.G.I. sheet gutter of Tata / Sail / Reliance / Jindals having dome shape grating fixed with bolts, nuts and washers etcetera including making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
55	Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured and paid separately) including fixing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
56	Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (Three hundred millimetres) vertically. The 2nd (Second) coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st (First) coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1 : 4 (one cement : four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 kg (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
57	Providing and fixing 150 mm (One hundred fifty millimetres) diametre on wall face PVC (D-Plast) rain water pipes of working pressure 4/6 Kg/cm2 (Four/six kilogramme per centimetre square) ISI marked of Finolex / Relpipe (Relience) / Vectus including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
58	Providing and fixing 150mm (One hundred fifty millimetres) dia PVC Plain bend on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogramme per centimetre square) ISI marked of Finolex / Relpipe (Relience) / Vectus including priming coat, painting and welding etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
59	Providing and fixing 150mm (One hundred fifty millimetres) dia PVC Shoe on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogramme per centimetre square) ISI marked of Finolex / Relpipe (Relience) / Vectus including priming coat, painting and welding etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
60	Providing and fixing PVC holder bat clamps of approved design to HDP rain water pipe embedded including cement concrete blocks 10x10x20cm of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size and cost of cutting holes and making good the walls etcetra as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
61	Structural steel work of Tata / Sail / Reliance / Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
62	Painting Steel work (including priming coat) with enamel paint of Nerolac / Asian to give an even shade two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eighty litre per ten square metre) of approved brand and manufacture including cleaning the surfaces of all dirt, dust and other foreign matter complete as per Architectural drawing, design and specification including entire carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
63	Painting wood work (including priming coat) with enamel paint of Nerolac/ Asian Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (Zero point seven five litre per ten square metre) of approved brand and manufacture including cleaning the surfaces of all dirt, dust and other foreign matter complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
64	Polishing (One or more coat) with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
65	Providing and applying 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement : Three sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
66	Providing and applying 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth witth cement mortar 1:6 (One cement : Six sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
67	Providing and applying 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
68	Providing and applying 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for exterior plastering upto all floor level including arrises, internal rounded angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
69	Providing plinth protection with 40 mm ( Forty millimetre) thick interlocking paver block of NTC/Atlantic with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centimetre) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate) in bedding/ haunching complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
70	Providing and applying white cement based putty of Birla white / JK average thickness 1mm (One millimetres) thick, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
71	Finishing walls with apex weather proof exterior emulsion of Asian/Dulux/Berger/Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty grams per liter) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats) applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre per ten square metre) upto all floor level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
72	Painting (two or more coats) with satin enamel paint of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved brand and manufacture of required colour to give an even shade on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
73	Wall painting with acrylic emulsion paint, Asian paints / Dulux paints / Nerolac paints / Berger Paints/ having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete, including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
74	WATER SUPPLY & SANITARY INSTALLATION Providing and fixing PN - 16 Pipe, 20mm (twenty millimetre) OD (SDR-7.4) 3 (three) layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
75	Providing and fixing PN - 16 Pipe, 25mm (twenty five millimetre) OD (SDR-7.4) 3 (three) layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m (one metre) spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
76	Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20 to 40mm (Twenty to forty millimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
77	Providing and fixing 110mm (One hundred ten millimetre) Nominal size/diameters in trenches P.V.C. Supreme/ Finolex pipe class \\"A\\" soil, waste and ventilating pipes 4/6 Kg/sqcm (Four/six Kilogram per square centimetres) thick fixing with approved adhesive mixure complete including entire carriage of materials complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
78	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters in trenches P.V.C. Supreme/ Finolex pipe class \\"A\\" soil, waste and ventilating pipes 4/6 Kg/sqcm (Four/six Kilogram per square centimetres) thick fixing with approved adhesive mixure complete including entire carriage of materials complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
79	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters P.V.C. clamps ISI marked including finishing with approved design with steel screws and rawl plugs etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
80	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters P.V.C. clamps ISI marked including finishing with approved design with steel screws and rawl plugs etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
81	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus heal rest Confirming to BIS-14735 including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
82	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus heal rest Confirming to BIS-14735 including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
83	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus plain bend Confirming to IS No. 14735-99 including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
84	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus plain bend Confirming to IS No. 14735-99 including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
85	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus Collars including filling with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
86	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus Collars including filling with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
87	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus Cowl including filling with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
88	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC Finolex / Relpipe (Relience) / Vectus Cowl including filling with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
89	Providing and fixing 110x90mm (One hundred ten millimeter into ninety milimeter) ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc.complete within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
90	Providing and fixing 110x75mm (One hundred ten millimeter into ninety milimeter) ISI marked P.V.C floor trap of Finolex / Relpipe (Relience) / Vectus of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc.complete within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
91	Providing and fixing vitreous China wash down water closet (European type W.C. pan) of Constellation No. S No. 20007(S-10) size 57x35x39Cm (fifty seven into thirty five into thirty nine centimetre) with 10 litre (ten) litre low level PVC flushing cistern (Sleek plus) having dual flush system of Cera or its equivalent of star white / snow white shade with fitting and brackets, 40 mm (forty millimetre) flush bend, 20 mm (twenty millimetre) over flow pipe, with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
92	Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
93	Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern Hindware/Cera in white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
94	Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm (five hundred fifty into four hundred millimetre) of Hindware/Cera in white shade with single 15 mm (fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
95	Providing and fixing 32 mm dia (thirty two millimetre diametre) P.V.C. flexible waste pipe of of Finolex / Relpipe (Relience) / Vectus for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
96	Providing and fixing 15 mm nominal bore, CP, push cock of IS No 8934 of Jal / ESS ESS without nuts and pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
97	Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 2071 of size 580x440 mm (five hundred eighty into four hundred forty millimetre) with integral type foot rests with 100 mm (one hundred millimetre)sand cast Iron P or S trap, 10 (ten) litre low level P.V.C. flushing cistern,of Cera or its equivalent of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
98	Providing and fixing 550x400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin Delta No. 10001 without pedestal of Cera or its equivalent with Mirror above of star white shade/snow white with single hole for pillar tap including 15 mm (Fifteen millimetre) nominal bore C.P. brass Pillar tap, 32mm (Thirty two millimetre) nominal bore C.P. brass waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings (Mirror to be measured and paid for seperately) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
99	Providing and fixing vitreous china flat back range of two half stall urinal Large flat back no 60002 of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimetre) with automatic flushing cistern of make Cera or its equivalent in white shade with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever require of snow white colour including connection with urinal and waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) complete as per Architectural drawing ,design and specifications, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
100	Providing and fixing vitreous china flat back range of three half stall urinal Large flat back no 60002 of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimetre) with automatic flushing cistern of make Cera or its equivalent in white shade with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever require of snow white colour including connection with urinal and waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) complete as per Architectural drawing ,design and specifications, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
101	Providing and fixing 32mm (Thirty two millimeter) nominal size diameters M.I. union for wash basin or sink including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
102	Providing and fixing 15mm (Fifteen millimetres) nominal bore P.V.C. connection pipe with brass union 45cm (Forty five Centimeters) length complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
103	Providing and fixing 32mm (thirty two millimeters) nominal diameters C.P waste for wash basin or sink complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
104	Providing and fixing 100mm (One hundred millimetres) C.P. iron grating of Superior quality of ISI marked IS No 8934 of Jal / ESS ESS for gully trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
105	Providing and fixing 75mm (seventy five millimetres) C.P. iron grating of Superior quality of ISI marked IS No 8934 of Jal / ESS ESS for gully trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
106	Providing and fixing 600x450mm (Six hundred into Four hundred fifty millimetre) nominal size bevelled edge mirror or superior glass of Modiguard/Saint Gobian mounted on 6mm (Six millimetre) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
107	Providing and fixing 600x20mm (Six hundred into twenty millimetres) size CP Brass towel rail of ISI marked IS No 8934 of Jal / ESS ESS complete with C.P. Brass brackets fixed to wooden plugs including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
108	Providing and fixing Plastic Liquid soap container with C.P. brass lid and brackets fixed to wooden plugs with C.P. brass screws complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
109	Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
110	Providing and fixing 8mm (Eight millimetre) diametre C.P./S.S. Jet of ISI marked IS No 8934 of Jal / ESS ESS with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of approved quality complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
111	Providing and fixing 600x120 mm (Six hundred into One hundred twenty millimetre) nominal size glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
112	Providing and fixing 15mm (Fifteen millimetre) diameters C.P. brass. Bib tap of ISI marked IS No 8934 of Jal / ESS ESS of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
113	Providing and fixing 15mm (Fifteen millimetre) diameters C.P. brass. stop cock of ISI marked IS No 8934 of Jal / ESS ESS of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
114	Providing and fixing 15mm (Fifteen millimetres) nominal bore/diametre brass angle valve of ISI marked IS No 8934 of Jal / ESS ESS without nut and pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
115	Providing and fixing 15mm (Fifteen millimetres) nominal bore/diametre brass full way valve with wheel of ISI marked IS No 8934 of Jal / ESS ESS complete in all respect including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
116	Providing and fixing 15mm (Fifteen millimetres) nominal bore brass valve (Horizontal plunger) type high pressure with copper plate of ISI marked IS No 8934 of Jal / ESS ESS complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
117	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC single equal branch with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
118	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC single equal equal branch with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
119	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC double equal branch with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
120	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC double equal branch with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
121	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixng with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
122	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixng with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
123	Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC offset 45° (forty five degree) ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetra complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
124	Providing and fixing 75mm (Seventy five millimetre) Nominal bore/diameters PVC offset 45° (forty five degree) ISI marked of Finolex / Relpipe (Relience) / Vectus including fixing with approved adhesive etcetra complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
125	Providing and placing on terrace (at all floor levels) polyethylene water storage tank having tripple layer of Finolex / Relpipe (Relience) / Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST.
126	Providing and laying cement concrete 1:5:10 (One cement : Five sand : Ten graded stone agg. 40mm (Forty millimetre) nominal size bedding for 150 mm ( One hundred fifty millimetre) diametre PVC pipe with necessary form work and curing complete including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. .
127	Constructing brick masonry manhole in cement mortar 1:4 (One cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix {One cement isto One point five coarse sand (zone- III) isto Three graded stone aggregate 20 mm ( Twenty Millimeter) nominal size, foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm ( Forty Millimeter) nominal size), inside plastering 12 mm ( Twelve Millimeter) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto four graded stone aggregate 20 mm ( Twenty Millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( Ninety into Eighty Centimeter) and 45 cm ( Forty Five Centimeter) deep including C.I. cover with frame (light duty) 455x610 mm ( Four Hundred Fifty Five into Six Hundred Ten Millimeter) internal dimensions, total weight of cover and frame to be not less than 38 kg ( Thirty Eight Kilogramme) {weight of cover 23 kg ( twenty Three Kilogramme and weight of frame 15 kg ( Fifteen Kilogramme} With Sewer bricks conforming to IS : 4885 complete as per the direction of Engineer-in-Charge icluding carriage of materials with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkana, toll tax, sales tax,GST nad any other taxes imposed by the Government.
128	Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm ( forty milimetres) nominal size), inside plastering 12 mm ( twelve milimetres) thickness with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside Inside size 120x90 cm ( One hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) deep including C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg ( twenty three kilogram )and weight of frame 15 kg ( fifteen kilogram) With Sewer bricks conforming to IS : 4885 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
129	Construction of brick masonry chambers for under ground C.I. inspection chamber and bends with second class common burnt clay building bricks in cement mortar 1:5 (one cement; five sand) C.I. cover with frame (light duty) 350mm x 610mm( three hundred fifty five millimeter into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23kg (twenty three kilogramme) and weight of frame 15 kg (fifteen kilogramme) with RCC top slab in cement concrete 1:2:4 ( one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) foundation concrete 1:5:10 ( one cement isto five sand isto ten graded stone aggregate 40mm (forty millimeter) nominal size) inside plaster 15mm(fifteen millimeter) thick with cement mortar 1:3 ( one cement isto three sand ) finished smooth with a floating coat of neat cement on walls and bed concrete inside dimensions 455x610x450mm( four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax or any other taxes imposed by the Government.
130	Providing and laying 20 mm (twenty millimetre) nominal bore in trenches, galvanised mild steel tubes (medium grade) with G.I fittings including trenching and refilling etcetra including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. .
131	Providing and fixing 15mm (fifteen millimetre) diametre to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. .
132	Providing and laying 150mm (One hundred fifty millimetres) nominal bore/diametres to level or slopes PVC pipe of Finolex / Relpipe (Relience) / Vectus for sewerage line and jointing with approved adhesive complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax, and any other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Civil Construction Tenders

Plumbing And Sanitary Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Restoration Of Damaged Structure Handed Over To Department Of Education At Chharabra (Shimla) Under Section 118 Of The Himachal Pradesg Tenancy And Land Reforms Act 1972, By Deputy Commissioner Shimla. (Sh:- Repair And Maintenance Of Civil, Shimla-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Restoration Of Damaged Structure Handed Over To Department Of Education At Chharabra (Shimla) Under Section 118 Of The Himachal Pradesg Tenancy And Land Reforms Act 1972, By Deputy Commissioner Shimla. (Sh:- Repair And Maintenance Of Civil, Shimla-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us