|
| 1 | Repair to plaster of thickness 12mm (Twelve millimetre) to 20mm (Twenty millimetre) in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete and as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government. |
| 2 | Removing white or colour wash by scrappting and sand papering and preparing the surface smooth including necessaty repairs to scratches etcetera complete and as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government. |
| 3 | Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax,Sales tax or any other taxes imposed by the Government. |
| 4 | Providing and fixing andosied aluminium work for door window, ventilator and partitions with extrued built up standard tublurand other sections of approved make confirming of IS 733 and IS 1285 andosied transparent fixed with rawl plugs and screw or with fixing clips with expansion hold fastners i/c necessary filling up of gaps at junctions all complete as per architectural drawings and the directions of Engineer-in-Charge The rates including including Royality, Malkhana, Octroi, Toll tax, sale tax, GST or any taxes imposed by the Government |
| 5 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etcetera complete as per the architectural drawings and the directions of Engineer-in-Charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4.0mm (Four point zero millimetre) thickness (weight not less than 10 kg/ sqm) as per direction of Engineer-in-Charge The rates including including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any taxes imposed by the Government |
| 6 | Steel work of Tata/Sail riveted, bolted or welded in built up sections, framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 7 | Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI marked-Z-120) of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted limpet and rubber washers complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 8 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government. |
| 9 | Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) for plain cement concrete, in or under water in open foundation for all types of structures, including pumping or bailing out water/ dewatering (surface/sub-soil water) and including removal of slush which may arise at the time of laying under water for all heights/depth and any quantum of water including cost of form work and curing complete as per drawing and MORD technical specification 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government. |
| 10 | Providing and laying size of Tile 500x500 mm (Five hundred into five hundred millimetre) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etetera, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government. |
| 11 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 12 | 40mm (Forty millimetre) thick cement concrete flooring 1:2:4 (One cement isto two sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size laid in one layer finished with a floating coat of neat cement complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. |
| 13 | Providing and fixing 300x16mm (Three hundred into sixteen millimetre) brass sliding door bolt anodized colour and shade with bolts and nuts or screws complete as per drawing as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 14 | Providing and fixing 300x10mm (Three hundred into ten millimetre) brass tower bolts (berrel type) anodized dyed to required shade or colour with necessary screws etcetera in doors complete as per drawing as per direction of Engineer in Charge.including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 15 | Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) brass tower bolts (berrel type) anodized dyed to required shade or colour with necessary screws etcetera in doors complete as per drawing as per direction of Engineer in Charge.including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 16 | Providing and fixing 150mm (one hundred fifty millimetre) Brass handles to required colour and shade with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, GST, toll tax or any other taxes imposed by the Government. |
| 17 | Providing and fixing 125mm (One hundred twenty five millimetre) Brass handles to required colour and shade with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, GST, toll tax or any other taxes imposed by the Government. |
| 18 | Providing and laying 75mm (Seventy five millimetre) thick compacted bed of dry brick aggregate of 40mm (Forty millimetre) thick nominal size including spreading, well ramming, consolidating and grouting with Sand, including finishing smooth etc. complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 19 | Making plinth protection 50mm thick of cement concrete 1:3:6 (One cement isto three coarse sand (zone - III) isto six graded stone aggregate 20mm (Twenty millimetre) nominal size over 75mm (Seventy five millimetre) thick bed of dry brick ballast 40mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 20 | Excavation in foundation trenches etectra in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts. The rate is including Octroi, Royality, Malkana, GST, Toll tax or any other taxes imposed by the Government. |
| 21 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in sub structure Grade-M20 (M-Twenty) Nominal mix 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate (40mm) forty millimeter nominal size) and MORD technical specification section 800, 900 & 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete for all heights/depths and any quantum of water complete including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, GST, Toll tax or any other taxes imposed by the Government. |
| 22 | Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500 D or more.for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. The rate including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government. |
| 23 | Providing and fixing G.I. Pipe 15mm (Fifteen millimetre) nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 24 | Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax,Sales tax or any other taxes imposed by the Government. |
| 25 | Providing and laying C.I manhole cover with frame. The weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) (weight of cover 23kg (Twenty three kilogramme) and weight of frame 15kgs (fifteen kilogramme) of manhole cover 455x610mm (Four hundred fifty five into six hundred ten millimeters) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax,GST or any other taxes imposed by the Government. |
| 26 | Providing and placing three layered PVC water storage tank, ISI marked 12701 sintex make and of having capacity 500ltr. (Five hundred liters) tank complete in all respects, with necessary fittings including over flow pipe ball valve, scour pipe, with polythene float valve, PVC cover with locking arrangement including providing pads of sizes as required for inlet and outlet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, Toll tax,GST or any other taxes imposed by the Government. |
| 27 | Providing and fixing white vitreous china Matrix water closet (European type) with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid each including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. |
| 28 | Providing and fixing wash basin with C.I. brackets, 15mm (Fifteen millimetre) C.P. brass pillar taps, 32mm (Twenty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 29 | Providing and fixing C.P. Brass bib tap with capstan head 15mm (Fifteen millimetre) dia complete and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.. |
| 30 | Providing and fixing C.P. brass angle valve 15mm (Fifteen millimetre) dia without nuts complete and pipe as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 31 | Providing and fixing C.P. Stop cocks 15mm (Fifteen millimetre) dia complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 32 | Providing and fixing C.P. Brass pillar tap with capstan head 15mm (Fifteen millimetre) dia complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 33 | Providing and fixing PVC connection with brass unions 15mm dia (Fifteen millimetre) complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 34 | Providing and fixing 110mm (One hundred ten millimetre) dia PVC plain bend ISI marked including fixing with approved adhesive etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 35 | Providing and fixing 110mm (One hundred ten millimetre) dia PVC offset 45' ISI marked including fixing with approved adhesive etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 36 | Providing and fixing PTMT ball valve of approved quality and colour 15mm (Fifteen millimetre) nominal bore complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 37 | Providing and fixing 110mm (One hundred ten millimetre) dia PVC door bend ISI marked including fixing with approved adhesive etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 38 | Providing and fixing G.I. Sockets 15mm (Fifteen millimetre) dia etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 39 | Providing and fixing G.I. Tee equal 15mm (Fifteen millimetre) dia etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.. |
| 40 | Providing and fixing G.I. Elbows 15mm dia (Fifteen millimetre) etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government.. |
| 41 | Providing and fixing G.I. Nipple 15mm (Fifteen millimetre) dia etcetera complete and as per direction of Engineer-in -Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 42 | Providing and fixing G.I. plug 15mm (Fifteen millimetre) dia etcetera complete and as per direction of Engineer in Charge.including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 43 | Providing and fixing PVC Pipes 150mm dia (One hundred fifty milimetre) etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 44 | Providing and fixing PVC Pipes 110mm dia (One hundred ten milimetre) etcetera complete and as per direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 45 | Providing and fixing PVC floor trap 110mmx90mm (One hundred ten millimetre into ninety millimetre) complete and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST or any other taxes imposed by the Government. |
| 46 | Providing and laying ISI marked factory made chamfered edge Cement Concrete paver blocks make of NTC/NITCO/HPPWD approved having thickness 60mm (Sixty millimetre) of M-30 grade with approved color design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax, sale tax ,GST or any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
