Tender For Repair/Replacement Of Damage Parts & Renewal Of Office Furniture & Including Painting/Polishing Of Tp Items At (Pxe/Itr Labs) At Chandipur, Chandipur-Odisha

TDR : 54856530

Tender Notice
BOQ

19 Days Left

Chandipur , Odisha

Tender Brief : Tender For Repair/Replacement Of Damage Parts & Renewal Of Office Furniture & Including Painting/Polishing Of Tp Items At (Pxe/Itr Labs) At Chandipur

Document Fees
₹ 500 /-

EMD
₹ 98000.0 /-

Tender Value
Refer document

Submission Date
16-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (I) R&D CHANDIPUR Name of Work: REPAIR/REPLACEMENT OF DAMAGE PARTS & RENEWAL OF OFFICE FURNITURE & INCLUDING PAINTING/POLISHING OF TP ITEMS AT (PXE/ITR LABS) AT CHANDIPUR Contract No: GE(I)R&D/BLS/ 2026-27 Bidder Name : SCHEDULE 'A' (BOQ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Work / Item Item Code / Make Number or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE (including all Taxes as specified in tender Documents) In Figures To be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2	NOTE (Applicable for all items) :-(The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.TABLE OFFICE OFFICERS STEEL {FD-84 (M)/FD-CCE R&D/BLS/ 65}: - M&L for carrying out repair and replacement of the following parts of table office officers steel all as shown on drg to match with existing including reassembling completely all as directed by Engr-in-Charge
3	S&F in replacement of table top of size 1370x760 mm made out of 18mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.
4	S&F in replacement of drawers of table made out of 1 mm thick MS sheet, over all size drawer as per drawings duly painted with a coat of pink primer all as shown in drg and as directed and specified.
5	S&F in replacement of shutters to the box fabricated out of 1mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified
6	S&F in replacement of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified.
7	S&F in replacement of side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified.
8	S&F in replacement of drawer lock with duplicate keys (Make : Godrej/Harrison/Link) or as approved by GE/Engr-In-Charge.
9	S&F of repair/replacement of Leg of size 25x25mm square tube as per existing size
10	S&F in replacement of rubber shoes for leg
11	After the removing of old paint, rust (by emery paper) and prepared whole surface of table office officers steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Burger,Asian,Apolite) all as directed by Engr-in-Charge.
12	TABLE OFFICE CLERK STEEL {FD-84(M)}: - M&L for carrying out repair and replacement of the following parts of table office clerk steel all as shown on drg to match with existing including reassembling completely all as directed by Engr-in-Charge.
13	S&F in replacement of table top of size 12000x610 mm made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.
14	S&F in replacement of drawers of table made out of 1 mm thick MS sheet, over all size drawer as per drawings duly painted with a coat of zink primer all as shown in drg and as directed and specified.
15	S&F in replacement of back of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified.
16	S&F in replacement of side of box of table made out of 1.00 mm thick MS sheet duly painted with a coat of zink primer all as shown in drg and as directed and specified.
17	S&F in replacement of rubber shoes for leg
18	S&F in replacement of drawer lock with duplicate keys (Make : Godrej/Harrison/Link)or as approved by GE/ Engr-In- Charge
19	S&F of repair/replacement of Leg of size 25x25mm square tube as per existing size
20	After the removing of old paint, rust (by emery paper) and prepaired whole surface of table office officers steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour (Make: Berger,Asian,Apolite) all as per directed by Engr-in-Charge.
21	SCIENTIST TABLE (FD/CCE/R&D/BLS/44) : M&L for carrying out repair and replacement of the following parts of Scientist table.Removing carefully the existing unserviceable/damaged parts of Scientist table and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
22	S&F in replacement of Table top of size 1500mm x825mm made out of 18mm thick ply wood BWR with 1.00mm thick plastic laminated sheet and 4 mmTW beading all around. Bottom side of the top shall be painted with a coat of white primer.
23	S&F in replacement of Side support (Leg) made out of 18/19 mm thick one side teak face prelaminated particle board of size 825x750mm
24	S&F in replacement of Drawers as per drawing/size & shape.
25	S&F Middle support of size 1460x465mm made out of 18mm thick OST plywood.
26	S&F in replacement of Foot rest of 65x25x890mm made out of 1st class hardwood (Teak)
27	S&F in replacement of Drawer lock with duplicate key (Make : Godrej/Harrison/or as approved by CE/Engr-In-Charge)
28	S&F CP Handle 75mm long
29	Polishing to scientist table with french polish to obtain smooth glossy finish including necessary preparation of surface complete.
30	SR. EXECUTIVE TABLE : M&L for carrying out repair and replacement of the following parts of Sr. executive table.Removing carefully the existing unserviceable/damaged parts of Sr. executive table and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
31	S&F in replacement of Table top of size (1950x900mm),made out of 18mm thick ply wood BWR commercial confirm to IS duly fixed with 1.00 mm thick plastic laminated sheet & 4 mm thick TW beading all around the top and bottom shall be painted with a coat of white primer.
32	S&F in replacement of Side leg of 18/19mm thick x 900x750mm particle board one side teak face particle board
33	S&F in replacement of Drawers as per existing size and shape
34	S&F in replacement of Middle support (1420x525mm) made out of 19 mm thick OST
35	S&F in replacement of Foot rest (65x25mm) made out of 1st class hard wood teak
36	S&F in replacement of Drawer lock along with duplicate key (Make : Godrej/Harrison/or as approved by CE/Engr-In-Charge)
37	Polishing to Sr Executive table with french polish to obtain smooth glossy finish.
38	SR. SCIENTIST TABLE (FD/CCE/R&D/BLS/38) : M&L for carry out repair and replacement of the following parts of Sr Scientist table , removing carefully the existing unserviceable / damaged parts of Sr Scientist table and supply and fixed of new parts / componetns as per required size and shape to match with existing including re-assembling complete all shown in drg. and as directed by Engr -in Charge ,
39	S&Fin replacemnt of Table top of size 1950x900mm 18mm thick ply wood BWR gde with 1.00 mm thick laminated sheet at top and 4.00mm thick teak beading allaround. Bottom side of the top shall be painted with a coat of white primer
40	S&F in replacement of Side (leg) of size 900x750mm made out of 19mm thick particle board one side teak face particle baord as existing size & shape.
41	S&F in replacement of Drawer as per existing size and shape as mentioned in drawing
42	S&F in replacement of Middle suport of size (1910x495mm) made out of 19mm thick particle baord OST.
43	S&F in replacement of Foot rest (60x40x1530mm) made out of 1st class HW (Teak)
44	S&F in replacement of drawer lock along with duplicate key
45	Apply one coat of french polish to SR Scientist table to obtain smooth glossy finich including necessary preparation of surfaces complete to SR scintist Table all as shown in drg or as directed by Engr-In-Charge.
46	TABLE DINING FOR 6 PERSONS (FD-273) : - Removing carefully the existing unserviceable/damaged parts of table dining for 6 persons and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
47	S&F of table top made out of 18/19mm thick ply wood BWR grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer all as shown in drg and as directed by Engr-in-Charge.
48	S&F of leg of size (40 x 75 x 732)mm, high made out of 1st class HW (Teak).
49	S&F of long rail of size (25 x 100 x 1500)mm long made out of 1st class HW (Teak).
50	S&F of short rail of size (25 x 100 x 900)mm long made out of 1st class HW (Teak).
51	S&F of triangular bracket (as support) made out of 2nd class hard wood (Teak) as per shape & size
52	Apply one coat french polish to table dining 6 persons dressing to obtain smooth, glossy finish including necessary preparation of surfaces complete to table dining for six persons. All as shown in drg/directed by Engr-In-Charge
53	S&F plastic rubber shoe white/black best quality as per existing size and shape
54	WORK STATION CHAIR & CONFERENCE CHAIR (FD/CCE/R&D/BLS/04) : M&L for carrying out repair/replacement of the following parts and supply & fix of new parts as under of Work Station Chair & Conference Chair as per drg.
55	S&F in replacement of 50mm thick of high , size (500x525)mm density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam)duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) for seat complete all as per drawing and as directed by Engineer-in-Charge.
56	S&F in replacement of All as per item No 7.01 here-in-above but for back including 6mm thick foam cushion (HD) on back side of chair lining of size 400x300mm, edges trimmed etc complete all as per drawings and all as directed by Engineer-in-Charge.
57	S&F in replacement of Seat made out of 9mm thick curved ply wood (5 ply) seat, BWR grade ISI marked of size (500x525)mm.
58	S&F in replacement of Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size (400x300)mm.
59	Point welding to various parts as required.
60	S&F in replacement of 25mm thick high density foam cushion covered with tapestry cloth not less than Rs. 180/- per RM and including 12mm thick 2nd class hard wood base for arm rest complete all as per drawings and as directed by Engineer-in-Charge.
61	S&F in replacement of Castor wheel as per existing size and shape as per sample .
62	Applying one coat of 1st quality synthetic enamel paint colour OG/Black as approved by spray machine after preparation of existing frame work station chair & conference chair.
63	TABLE DINNING FOR 4 PERS (Users Sketch/TP):- M&L for carrying out repair and replacement of the following parts of table dinning 4 pers all as shown on drg and as directed by Engr-in-Charge.
64	S&F of Table top of size ( 1200x700mm) made out of 18mm thick plywood BWR grade with 1.00mm thick plastic laminated sheet at top and all around 4.00mm thick teak wood beding .Bottom side of the top shall be painted with coat of white primer.
65	S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.
66	S&F All as per item No. 8.02 here-in-before but for stiffner
67	S&F of rubber shoes best quality for legs
68	Preparing of steel surface of table dining for 4 pers and applying one coat of synthetic enamel paint over a coat of zink primer of required colour all as specified and as directed by Engr-in charge
69	SCIENTIST WORK STATION (FD/CCE/R&D/BLS/18): - M&L for carrying out repair and replacement of the following parts of scientist work station. Removing carefully the existing unserviceable/damaged parts of scientist work station and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
70	S&F in replacement of Table top of size 1500x825mm made out of 18/19mm thick prelaminated particle board Make- Archid/Novapan/Action tesa including 4mm teak wood beading alround.
71	S&F in replacement of Side(Leg) 20mm thick one side teak face particle board of size 825x750mm
72	S&F in replacement of Drawer as per existing size and shape
73	S&F in replacement of Middle support of size 1460x465mm madeout of 18/19mm thick prelaminated partical board make- Archid/Novapan/Action tesa
74	S&F in replacement of Foot rest of size 65x25x890mm made out of 1st class hardwood teak
75	S&F in replacement of Drawer lock with duplicate key Make- godrej/ harrison/link
76	Applying one coat of french polish to obtained smooth glossy finish after preparation of surface complete to Scientist work stn.
77	STOOL WOODEN 450X 300 X 600MM (GE/CDP/F/33) :M&L for carrying out repair and replacement of the following parts of working table .Removing carefully the existing unserviceable/damaged parts of stool wooden and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
78	S&F of Leg of size 45 x45x 581mm made out of 1st class HW
79	S&F of Long rail of size 19 x 40x450mm made out of 1st class HW
80	S&F of Short rail of size 19 x 40x450mm made out of 1st class HW
81	S&F of Stiffner of size 19 x 40x450mm made out of 1st class HW
82	S&F of Top of size 450x 300mm x 19mm thick of 1st class hard wood.
83	Applying one coat of french polish to obtain smooth glossy finish after preparation of surface complete to stool wooden.
84	SIDE UNIT 900x400x650MM (FD/CCE/R&D/BLS/19) : M&L for carrying out repair and replacement of the following parts of side unit 900x400x650mm.Removing carefully the existing unserviceable/damaged side unit 900x400x650mm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
85	S&F in replacement of Leg of size 20x35x650mm made out of 1st class hardwood (Teak)
86	S&FSide made out of 18mm thick one side teak face plywood of size 400x650mm
87	S&F Table top of size (900x400mm) made out of 18mm thick plywood with 4mm thick TW breading all aoround top.
88	S&F in replacement of Drawer as per drawing
89	S&F in replacement of multi purpose Lock with duplicate keys for drawer (make : Godrej/Harison/Link)
90	S&F in replacement of Support made out of 18mm thick one side teak face plywood of size 900x650mm
91	Polishing to Side Unit 900x400x650mm with french polish to obtain smooth glossy finish including necessary preparation of surface.
92	SIDE UNIT 900x430x700MM (FD/CCE/R&D/BLS/19) : M&L for carrying out repair and replacement of the following parts of side unit 900 x 430x 700mm .Removing carefully the existing unserviceable/damaged parts of side unit 900 x 430x 700mm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
93	S&F in replacement of Leg of size 20x35x700mm made out of 1st class hardwood (Teak)
94	S&F in replacement of Side made out of 18/19mm thick one side teak face plywood of size 430x700mm
95	S&F in replacement of Table top of size (900x430mm) made out of 18/19mm thick prelaminated particle board with 4mm thick Tw beading all around.
96	S&F in replacement of Drawer as per required size & shape .
97	S&F in replacement of multi purpose Lock with duplicate keys for drawer (make : Godrej/Harison/Link)
98	S&F in replacement of Support made out of 18/19mm thick one side teak face prelaminated particle board of size 900x 700mm
99	S&F CP Handle 75mm long as per existing pattern or as directed by Engr-In-Charge
100	Polishing to Side Unit size of 900x 430x 700mm with french polish to obtain smooth glossy finish including necessary preparation of surface.
101	RACK STEEL ADJ 6 TIER 1905mmx915mmx305mm {FD106(M)} : - M&L for carrying out repair and replacement of the following parts of rack steel adj 6 tier for re-assembling with new parts/components as per required size and shape all as shown in drg to match with existing all as per directed by Engr-in-Charge
102	S&F in replacement of shelves with nut and bolt/welding where ever required all as diected and specified as per drawing .
103	S&F in replacement of to the racks after removing dents from back. Top bottom and each shelves repairs to legs and refixing by welding and making it serviceable.
104	After the removing of old paint, rust (by emery paper) and prepaired whole surface of rack steel adj 6 tier for painting, then apply paint one coat of red oxide paint inner & outer, then after apply one coat of spray painting to rack steel adj 6 tier inner and outer surface with synthetic enamel paint olive green (Make: Asian Berger) complete all as shown in drg/directed by Engr-in-Charge.
105	LUNCH TABLE 1200x760x700mm (GE/BLS/20/95) : - M&L for carrying out repair and replacement of the following parts of lunch Table .Removing carefully the existing unserviceable/damaged parts of lunchTable and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
106	S&F of Table top of size ( 1200x700mm) made out of 18mm thick plywood BWR grade with 1 mm thick laminated sheet at topand all around teak wood beding .Bootom side of the top shall be painted with coat of white primer.
107	S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.
108	S&F All as per item No.14.02 here-in-before but for stiffner
109	S&F of rubber shoes for leg
110	Preparing of steel surface of lunch table and applying one coat of synthetic enamel paint of required colour all as specified and as directed by Engr-in-charge
111	LAB STOOL 370X420X850MM (FD/CCE/R&D/BLS/47) : - M&L for carrying out repair and replacement of the following parts of lab stool 370x420x850mm. Removing carefully the existing unserviceable/damaged parts of lab stool 370x420x850mm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
112	S&F in replacement of 50mm thick high density rubber foam cushion of size 440x380mm (shape as required size) duly covered with tapestry cloth for seat.
113	S&F in replacement of -do- but here in above for back of size 155x691mm
114	S&F in replacement of 9mm thick plywood (5nos ply) seat commercial duly finished of size 440x380mm BWR grade .
115	S&F in replacement of 9mm thick plywood (5nos ply) back commercial duly finished of size 155x691mm BWR grade .
116	M&L Applying one coats of 1st quality synthetic enamel paint black over a coat of pink primer (yellow) by spray machine after preparation of surface complete to lab stool 370x420x850 mm
117	JR STAFF TABLE (1200 X750 X750MM) (FD/CCE/R&D/BLS/20 ): M&L for carry out repair and replacement of the following parts of Jr staff table , Removing carefully the existing unserviceable / damaged parts ofJR staff table and supply and fixed of new parts / componetns as per required size and shape to match with existing including re-assembling complete all shown in drg. and as directed by Engr -in Charge.
118	S&F in replacement of Table top made out of 18mm thick plywood (BWR grade) with 1.00 mm thick plastic laminated sheet on top of size 1200x 750mm with all around 4mm thick TW edging bottom side of the top shall be painted with a coat of white primer
119	S&F in replacement of Leg made out of 19mm thick particle board with one side decorative finish
120	S&F in replacement of Support of size 1160 x 460mm) made out of 19mm thick particle board with one side decorative finish complete.
121	Apply one coat of french polish to JR staff table to obtain smooth glossy finish including necessary preparation of surfaces completer to JR staff table all as shown in drg/directed by Engr-In-Charge.
122	EXECUTIVE TABLE 1350X750X750MM (FD/CCE/R&D/BLS/18 ) : - M&L for carrying out repair and replacement of the following parts of executive table 1350x750x750mm. Removing carefully the existing unserviceable/damaged parts ofexecutive table 1350x750x750mm and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
123	S&F in replacement of Table top of size 1350x750mm made out of 18/19mm thick prelaminated partical board make- Archid/Novapan/Action tesa including 4mm teak wood beading all around the top.
124	S&F in replacement of Side(Leg) 20mm thick one side teak face partical board of size 625x750mm
125	S&F in replacement of Drawer as per existing size and shape
126	S&F in replacement of Middle support of size 505X425mm madeout of 18/19mm thick prelaminated partical board make- Archid/Novapan/Action tesa
127	S&F in replacement of Foot rest of size 65x25x850mm made out of 1st class hardwood teak
128	S&F in replacement of Drawer lock with duplicate key (Make- Godrej/ Harrison/Link)
129	S&F CP Handle 75mm long as per existing pattern or as directed by Engr-In-Charge
130	Applying one coat of french polish to obtained high glossy finish after preparation of surface complete to executive table.
131	BOOK CASE STEEL{FD90(M)} : M&L for carrying out repair and replacement of the following parts of Book case steel.Removing carefully the existing unserviceable/damaged parts of Book case steel and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
132	S&F in replacement of Glass pane 5mm thick as per required size & shape .
133	S&F in replacement of Shelf made out of 1.25mm PBI sheet of size 305x840mm
134	S&F in replacement of Handle steel chromium plated of size 75mm long.
135	S&F in replacement of Brass lock 6 lever with duplicate key make Godrej,Harisen/link or as approved by GE/Engr-in-Charge.
136	M&L Applying one coats of 1st quality synthetic enamel paint (OG/Gray) as approved over a coat of pink primer (yellow) by spray machine after preparation of surface complete to book case steel .
137	ALMIRAH LARGE STEEL WITH SHELVES {FD-67 (M)/FD1031} : - M&L for carrying out repair and replacement of the following parts of almirah large steel with shelves as per drg to match with existing including reassembling completely all as directed by GE/Engr-in-Charge.
138	S&F in replacement of base in \\"U\\" shape made out of 1.25 mm thick PBI sheet with ends cover welded with electric welding machine to match with existing 100mm high from buttom.
139	S&F in replacement of three way locking device 10 mm dia as per required shape & size
140	S&F in replacement of shelves made out of 1.00 mm thick MS sheet over all size 485 x 920 mm.
141	S&F in replacement CP MS handle of size 100mm long as per existing pattern and design or Almirah or as directed and specified by GE/Engr-in-Charge.
142	S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes as approved by GE all as directed and specified
143	S&F in replacement of MS cleat for shelves made out of 1.00 mm thick MS sheet
144	S&F in replacement of key hole cover outer best quality approved by GE
145	S&F in replacement of key hole cover inner side made out of 1.00 mm thick MS sheet
146	After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah large steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah large steel internally & externallyexposed to view with synthetic enamel paint olive green (Make: Asian, Berger) complete all as shown in drg / directed by GE/Engr-in-Charge.
147	ALMIRAH MED STEEL WITH SHELVES {FD-243/FD-1032} : - M&L for carrying out repair and replacement of the following parts of almirah med steel with shelves as per drg to match with existing including reassembling completely or as directed GE/Engr-in-Charge.
148	S&F in replacement of base in \\"U\\" shape made out of 1.25 mm thick PBI sheet with ends cover welded with electric welding machine to match with existing 100mm high from but buttom.
149	S&F in replacement of three way locking device 10 mm dia as per required shape & size
150	S&F in replacement of shelves made out of 1.00 mm thick MS sheet over all size 440 x 765 mm.
151	S&F in replacement CP MS handle of size 100mm as per existing pattern and design to any type of Almirah all as directed and specified by GE/Engr-in-Charge.
152	S&F in replacement 3 way lock, 4 levers with duplicate keys MAKE : HARRISON/GODREJ and other standard makes or as approved by GE or as directed and specified in drg.
153	S&F in replacement of MS cleat for shelves made out of 1.00 mm thick MS sheet
154	S&F in replacement of key hole cover outer best quality approved by GE
155	S&F in replacement of key hole cover inner made out of 1.00 mm thick MS sheet
156	After the removing of old paint, dent, rust (by emery paper) and prepaired whole surface of almirah medium steel for painting, then apply one coat of red oxide paint inner & outer, then after apply one coat of spray painting to almirah med steel inner and outer surface with synthetic enamel paint olive green (Make: Asian,Berger,Apolite complete all as per drg.
157	WORK BENCH ACCESSORIES{FD/CCE/R&D/BLS/51} : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of work bench asssoceries of as per drg
158	Table top size 1500 x 900 mm made out of 18 mm thick plywwood BWR gde fixed with 1.0mm tick plastic laminated sheet and TW 4mm edging all around of the top bottom side of the top shall be painted with one coat of white primer including preparation of surface and all as directed by Engr- In Charge.
159	Side leg 20mm thick one side teak face particle board size as per existing and all as directed by Engr-in Charge.
160	S&F of Drawer as per eixsting size and shaped all as directed by Engr -in Charge.
161	S&F of Foot rest of size 50 x 20 x 1500mm made out of 1st class hard wood
162	S&F in replacement of drawer lock with duplicate keys
163	S&F CP Handle 75mm long as per existing patten or as directed by Engr-In-Charge
164	Polishing to work bench assoceriest with french polish to obtain smooth glossy finish complete and all as directed by Engr-in-charge
165	SOFA SINGLE SEATER {FD/CCE/R&D/BLS/34} : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Sofa single Seater as per drg
166	100mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) duly covered with tapestry cloth over long cloth for seat complete of size 680x525mm costing not less than Rs. 250/- per R/M.
167	All as per item No 22.01 here-in-above but for back complete 680X325mm
168	S&F of side frame of size (725x625)mm and section 45 x 45mm complete made out of 1st class hard wood (Teak).
169	All as per item No 22.03 here-in-above but for frame seat bottom of size (700x615)mm having section (45x45)mm made out of 1st class hardwood (Teak).
170	All as per item No 22.03 here-in-above but for frame back of size (625x615)mm section (45x45)mm made out of 1st class hardwood (Teak).
171	All as per item No 22.03 here-in-above but for arms of size 45x45x680mm made out of 1st class hardwood (Teak).
172	Polishing to sofa sigle seater with french polish to obtain smooth glossy finish.
173	SOFA DOUBLE SEATER (FD/CCE/R&D/BLS/35) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Sofa Double Seater as per drg
174	100mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) over long cloth for seat complete of size 655x1050mm.
175	All as per item No 23.01 here-in-above but for back complete of size 1050x325mm coting(Make Hariyana handlooms/Vimal/Gwalior or as approved)
176	S&F of hand rest of size 45x45x680mm long made out of 1st class hardwood(Teak).
177	Polishing to sofa double seater with french polish to obtain smooth glossy finish.
178	CUP BOARD STEEL WITH MINOR LOCKER (TP) : M&L for carrying out repair and replacement of the following parts of Cup board .Removing carefully the existing unserviceable/damaged parts of Cup board and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
179	S&F in replacement of Leg (Base) made out of 1.25mm thick PBI sheet heigh to match with the existing and welded to body at bottom of 100mm high.
180	S&FMS in replacement of three way locking device
181	S&F in replacement of Brass lock 6 lever with duplicate key
182	S&F in replacement of Handle steel chromium plated of size 100mm long.
183	S&F in replacement of Key hole cover inner made out of 1mm thick PBI sheet bent to shape as per drg
184	M&L Applying one coats of 1st quality synthetic enamel paint (OG/Gray) as approved over a coat of zink primer (yellow) by spray machine after preparation of surface complete to cup board steel with minor locker.
185	DESK SCHOOL CHILD 2 SEATER {FD124(M)} : M&L for carrying out repair and replacement of the following parts of Desk school child 2 seater. Removing carefully the existing unserviceable/damaged parts of Desk school child 2 seater and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
186	S&F Top 18mm thick ply wood BWR grade fixed with 1.00mm thick laminated sheet at top of size 900x455mm and 4mm thick T/w edging all around the top and bottom sid of the top shall be painted with a coat of white primer all as shown in drg.
187	S&F of bottom 18mm thick ply wood BWR of size 800x380mm
188	S&F of side 18mm thick plywood BWR thick of size 550x380mm
189	S&F of back 12mm thick plywood of size 800x380mm
190	Leg with 16G MS 25mm square tube, 550mm long
191	Stiffner with 16G MS 25mm square tube 310mm long
192	S&F hard rubber shoe best quality as per existing size and shape
193	M&L Applying one coats of 1st quality synthetic enamel paint (OG/Black) as approved over a coat of pink primer (yellow) by spray machine after preparation of surface complete.
194	DESK SCHOOL CHILD 3 SEATER {FD124(M)} : M&L for carrying out repair and replacement of the following parts of Destk school child 3 seater. Removing carefully the existing unserviceable/damaged parts of Desk school child 3 seater and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
195	S&F of top 18mm thick plywood BWR grade fixed with 1.00mm thick laminated sheet at top of size 1350x455mm and 4 mm thick T/W edging all around the top bottom side of the top shall be painted with a coat of white primer all as shown in drg.
196	S&F of bottom h 8mm thick plywood BWR of size 1200x380mm
197	Leg with 16G MS 25mm square tube, 550mm long
198	Stiffner with 16G MS 25mm square tube 310mm long
199	S&F hard rubber shoe best quality as per existing size and shape
200	M&L Applying one coats of 1st quality synthetic enamel paint (OG/Black) as approved over a coat of zink primer (yellow) by spray machine after preparation of surface complete to desk school child 3 seater
201	CHAIR REVOLVING EXECUTIVE (MAKE OF PARTS/COMPONENTS:GODREJ MODEL NO.PCH-6002A/7001/7000/7042 AND EQUIVALENT (TP) : M & L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair revolving executive of model No. PCH-6002A,7001,7000,7042 and equivalant all as per Godrej Pattern.
202	S&F in replacement of Seat as per existing size & shape.
203	S&F in replacement of Back as per existing size & shape.
204	S&F in replacement of Adjustable hydraulic system complete with outer cover.
205	S&F in replacement of pedestal (Base frame).
206	S&F in replacement of PU Arms.
207	S&F in replacement of Castor wheel as per existing size.
208	CHAIR REVOLVING EXECUTIVE (MAKE OF PARTS/COMPONENTS : GODREJ MODEL NO. PCH-5001T/7001D/9N01 AND EQUIVALENT (TP) : M & L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair revolving executive PCH-5001T,7001D 9N01 and equivalant as per Make/Model No. mentioned above.
209	S&F in replacement of Seat complete as per size & shape.
210	S&F in replacement of Back complete as per size & shape.
211	S&F in replacement of Adjustable hydraulic system compete with outer cover
212	S&F in replacement of pedestal (Base frame)
213	S&F in replacement of PU Arms.
214	S&F in replacement of Castor wheel as per existing size.
215	CHAIR REVOLVING EXECUTIVE (MAKE OF PARTS/COMPONENTS : GODREJ MODEL NO. PCH-7002/5002T/9N02/8102 AND EQUIVALENT (TP) : M & L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair revolving executive PCH-7002/5002T/9N02 and equivalant as per Make/Model No. mentioned above.
216	S&F in replacement of Seat complete as per size & shape.
217	S&F in replacement of Back complete as per size & shape.
218	S&F in replacement of Adjustable hydraulic system compete with outer cover
219	S&F in replacement of pedestal (Base frame)
220	S&F in replacement of PU Arms.
221	S&F in replacement of Castor wheel as per existing size.
222	CHAIR OFFICE WITH ARM CUSHIONED SEAT AND BACK MODEL NO 7-B (TP) M&L for carrying out repair/replacement of the following parts and supply & fix of new parts as under to Chair Office with Arm Cushioned seat and Back Model No. 7-B as per drg.
223	S&F in replacement of 75mm thick high density foam cushion (Make: Sleepwell/ Feather Foam/Cool Foam) of size 450x400mm (Shape as per drg) duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) made out of single piece of required size for seat complete all as directed by Engineer-in-Charge.
224	S&FAll in replacement of as per item No.30.01 above but for back complete.
225	S&F in replacement of 25mm thick high denisity foam cushion with tapesty cloth cover including 2nd class hard wood base for arm rest.
226	S&F in replacement of Machine screw with bolt, 65mm to 75 mm long, 3mm to 5mm dia as required.
227	S&F in replacement of 25x3mm Flat iron 50mm long MS clamp for fixing back frame/rear frame welded to steel frame of chair complete all as directed by Engineer-in-Charge.
228	M&L Applying one coats of 1st quality synthetic enamel paint (OG/Black) as approved over a coat of zink primer (yellow) by spray machine after preparation of surface complete on existing frame of chair office with arms cushioned seat back model No 7B.
229	COMPUTER CHAIR {FD/CCE/R&D/BLS/01 & TP} : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Computer Chair as per drg & as per the direction of Engr-in-charge.
230	S&F in replacement of 50mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) for seat of size 425x400mm, edges trimmed complete all as shown on drawing.
231	S&F in replacement of All as per item No.31.01 here-in-above but for back including 6mm thick foam cushion (HD) lining on back side of chair computer of size 400x300mm edges trimmed complete all as per drawings and as directed by Engineer-in-Charge.
232	S&F in replacement of Seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm.
233	S&F in replacement of Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm.
234	Point welding to various parts as required.
235	S&F in replacement of Castor wheel as per existing size and shape (as per sample)
236	Applying one coats of 1st quality synthetic enamel paint colour OG/Black by spray machine after preparation of surface complete on existing frame work of computer chair complete all as directed by Engr-in-charge.
237	CHAIR DINING OFFICER WITH CUSHION (FD/E6/MAP-II/06) :- M&L for carrying out repair/replacement of the following parts and supply and fizing of new parts/ components as under of chair dining officers as shown in drgs of as per direction of Engr-In-Charge
238	S&F of front leg of size 35 X 50 X 400mm long made out of 1 st class HW (teak) all as shown in drgs
239	S&F of rear leg of size 35 X 50 X 960mm long made out of 1 st class HW (teak) all as shown in drgs
240	S&F of rear rail of size 25 X 65 X 450mm long made out of 1 st class HW (teak) all as shown in drgs
241	S&F of side rail of size 25 X 65 X 460mm long made out of 1 st class HW (teak) all as shown in drgs
242	S&F of of size 15X30mm teakwood vertical strip made out of 1 st class HW (teak) all as shown in drgs
243	S&F of curved teak wood back rest of size 25 X 45 mm
244	S&F in replacement of existing old worn out unserviceable cushion 75mm thick of required size and shape duly covered with tapestary cloth as approved by Engr-In-Charge (make : Sleepwell/feather foam/Cool Foam)
245	S&F in replacement of old/broken sheet ply 12mm thick ply as per required size and shape as shown in drg (Make : National/Kitply/Greenply) duly fixed with screw.
246	Polishing to chair dining officer with french polish to obtain smooth glossy finish complete & as directed by Engr-In-Charge.
247	S&F hard rubber shoes in white/black colour of best quality as per required size
248	CHAIR VISITIORS (FD/CCE/R&D/ BLS/22) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair Visitors as per drg
249	S&F of front leg of size 50x32x450mm long made out of 1st class HW (Teak).
250	S&F of rear leg of size 50x32x825mm high made out of 1st class HW (Teak).
251	S&F of arm of size 50x32x540mm made out of 1st class HW (Teak)
252	S&F of back frame of size 32x40mm (overall length 1550mm) made out of 1st class HW (Teak).
253	S&F of support of size 25x32 x 500mm made out of 1st class HW (Teak).
254	S&F of high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) for seat size 500x540x50mm thick duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) over long cloth complete.
255	S&F of high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) for back size 420x210x20mm thick duly covered with tapestry cloth (Make Hariyana handlooms/Vimal/Gwalior or as approved) over long cloth.
256	S&F of seat made out of 9mm thick BWR grade ISI marked plywood size 500x540mm.
257	Polishing to chair visitor with french polish to obtain smooth glossy finish complete.
258	CHAIR WITH CUSHION SEAT & BACK (GE/CDP/F/21/98) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair with Cushion Seat & Back as per drg
259	S&F of front leg of size 30x55x450mm made out of 1st class HW (Teak).
260	S&F of rear leg of size 30x55x890mm made out of 1st class HW (Teak).
261	S&F of side rail of size 30x55x450mm made out of 1st class HW (Teak).
262	S&F of front rail of size 30x55x450mm made out of 1st class HW (Teak).
263	S&F of rear rail of size 30x55x450mm made out of 1st class HW (Teak).
264	S&F of stiffener of size 25x20x450mm made out of 1st class HW (Teak).
265	S&F of back frame made out of 1st class HW (Teak) as per existing size & shape.
266	S&F of seat made out of 6mm thick BWR grade ISI Marked ply wood as per existing size and shape.
267	S&F of back made out of 6mm thick BWR grade ISI Marked ply wood as per existing size and shape.
268	S&F of high density foam cushion 50mm (Make: Sleepwell/Feather Foam/Cool Foam) thick duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) over long cloth for seat.
269	S&F of high density foam cushion 20mm (Make: Sleepwell/Feather Foam/Cool Foam) thick duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) costing not less than 250/- per R/M.
270	S&F of rubber shoes best quality as per existing size and shape.
271	Polishing to chair cushion with french polish to obtain smooth glossy finish.
272	CHAIR WITH BACK REST (GE/CDP/F/27) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of chair with back rest of as per drg
273	S&F of front leg 50x 50 x 450mm made out of 1st class HW teak
274	S&F of rear leg 50x 50 x 850mm made out of 1st class HW tea
275	S&F of side rail 25x65x450mm made out of 1st class HW teak
276	S&F of front rail 25x65x430mm made out of 1st class HW teak
277	S&F of rear rail 25x65x430mm made out of 1st class HW teak
278	S&F of stiffiner19x25xx450mm made out of 1st class HW teak
279	S&F of back stiffiner 50x12x420mm made out of 1st class HW teak
280	S&F of seat plank 2nd class hard wood 19 thick 430x 430mm
281	Polishing to chair with back rst with french polish to obtain smooth glossy finish complete
282	CHAIR REVOLVING WITHOUT CASTER (TP) : M&L for carrying out repair and replacement of the following parts of chair revolving wihtout caster .Removing carefully the existing unserviceable/damaged parts of stool wooden and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
283	S&F in replacement 75mm thick high density sythetic foam cushion with tapestry cloth seat al as per existing
284	S&F in replacement 75mm thick cushion for back inclusding 6mm thick foam cushion (HD) lining on back side
285	S&F in replacement 9mm thick curved ply wood ( 5 nosply) seat commercial finish
286	S&F in replacement 9mm thick curved ply wood ( 5 nosply) back commercial finish
287	Preparing of steel surface of chair revolving without caster and applying one coat of synthetic enamel paint of required colour all as specified and as directed by Engr-in Charge .
288	EQUIPMENT CHAIR SINGLE SEATER (FD/CCE/R&D/BLS/58) :- M&L for carrying out repair and replacement of the following parts of equipment chair single seater. Removing carefully the existing unserviceable/damaged parts of equipment chair single seater and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
289	S&F in replacement of 100mm x 32mm thick high density foam cushion duly (Make :sleepwell/feather foam/Cool foam) covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) not less than Rs. 200/- per RM for seat complete of size 513x629mm.
290	S&F in replacement of 100MM x 32mm thick high density foam cushion duly (Make :sleepwell/feather foam/Cool foam) covered with tapestry cloth not less than Rs. 200/- per RM for back complete of size 513x325mm
291	S&F in replacement of Hand rest complete as per drg made out of 1st class hard wood teak
292	S&F in replacement of Applying one coat of french polish to obtained smooth glossy finish after preparation of surface complete to equipment chair single seater complete.
293	REVOLVING CHAIR 525X525X850MM (FD/CCE/R&D/BLS/04) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Revolving chair 525x525x850mm as per drg
294	S&F in replacement of 75mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) of size 525x525mm (Shape as per drg) duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) made out of single piece of required size for seat complete all as directed by Engineer-in-Charge.
295	S&F in replacement of 75mm thick high density foam cushion (Make: Sleepwell/Feather Foam/Cool Foam) of size 400x300 mm (Shape as per drg) duly covered with tapestry cloth(Make Hariyana handlooms/Vimal/Gwalior or as approved) made out of single piece of required size for seat complete all as directed by Engineer-in-Charge.
296	S&F in replacement of Seat made out of 9mm thick curved ply wood (5 ply) seat, BWR grade ISI marked of size (525x525)mm.
297	S&F in replacement of Back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size (400x300)mm.
298	S&F in replacement of Castor wheel as per existing size.
299	Polishing to Revolving chair 525x525x850mm with french polish to obtain smooth glossy finish.
300	CHAIR REVOLVING MODEL KAREENA HIGH BACK (TP) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair revolving Model Kareen High Back as per drg
301	S&F in replacement of Seat cushion complete as per size & shape.
302	S&F in replacement of Back cushion complete as per size & shape.
303	S&F in replacement of Adjustable hydraulic system compete with outer cover
304	S&F in replacement of pedestal (Base frame).
305	S&F in replacement of PU Arms.
306	S&F in replacement of Castor wheel as per existing size.
307	WOODEN BOTTOM CHAIR DINNING WITHOUT ARM WITH 12MM THICK CURVED PLYWOOD SEAT &BACK (User's Sketch):- M&L for carrying out repair and replacement of the following parts of wooden bottom chair.Removing carefully the existing unserviceable/damaged parts of wooden bottom chair and supply and fix of new parts/ components of required size and shape as per drg to match with the existing including re-assembling complete all as directed by Engr-in-charge
308	S&F of Front leg of size 50mmx50mm at top 30mmx30mm at bottom 430mm long made out of 1st class hardwood teak
309	S&F of Rear leg of size 50mmx50mm at top and 30mmx30mm at bottom with 820mm long made out of 1st class hard wood teak
310	S&F of Front rail of size 50mmx20x390mm made out of 1st class hardwood teak
311	S&F of Rear rail of size 50mmx20mmx390mm made out of 1st class hard wood teak
312	S&F of Stiffner of size 25mmx20mmx360mm made out of 1st class hardwood teak
313	S&F of 12 mm thick plywood (7nos ply)curved seat BWR grade teak face one side of size 430mmx420mm
314	S&F of All as per shown above but in back of size 420mmx355mm
315	Applying one coat of french polish after preparation of surface complete to wooden bottom dinning chair without Arm.
316	TABLE COMPUTER (TP) : M&L for carry out repair and replacement of the following parts of Executive table Computer, removing carefully the existing unserviceable / damaged parts of table computer and supply and fixed of new parts / componetns as per required size and shape to match with existing including re-assembling complete all shown in drg. and as directed by Engr -in Charge
317	S&F of Table top 18mm thick prelaminated particle baord as per existing size and shape
318	S&F of Bottom shelf 18mm thick particle baord as per existing size and shape
319	S&F sheves 18mm thick prelaminated particle baord as per existing size and shape
320	S&F mouse tray 18mm thickprelaminated particle baord as per existing size and shape
321	S&F drawer made out 18mm thick prelaminated particle baord as per existing size and shape
322	S&F telescopic channel as per existing size and shape for key board drawer
323	S&F of keyboard tray as per existing size and shape
324	S&F of hard rubber shoes black/white in colour (Best quality)
325	S&F of PVC caps for leg as per required size
326	M&L applying one coat of 1st quality synthetic enamelled black paint (Make : berger,Asian,Apolite) a over a coat of zink prime rtolega all as per drgs/direction of Engr-in-Charge
327	FORM WITH BACK 3 SEATER {FD-78(M)} : - M&L for carrying out repair and replacement of the following parts of form with back 3 seater all as shown in drg. and as directed by Engr-in Charge.
328	Removing the existing userviceable broken seat plank and supply & fix new second class hard wood (Bijasal/Hollock) seat plank of size 1350x255mm and 25mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glosy fensh of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.
329	Removing the existing userviceable broken back plank and supply & fix new second class hard wood (Bijasal/Hollock) back plank of size 1350x150mm and 25mm thick fixed to steel frame with GI nut/bolt & washer and duly polished with french polish glosy fensh of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.
330	S&F of legs made out of 25mm square conduit 16 gauge including cutting, welding to required length of adequate size of all as shown on drg and as specified and directed by Engr-in-Charge.
331	All as per item No. 18.03 here-in-before but for stiffner
332	S&F of rubber shoe for leg
333	Preparing of steel surface of form with back 3 seater and applying one coat of synthetic enamel paint of required colour all as specified and directed.
334	CHAIR REVOLVING MODEL FEATHERLITE HIGH BACK (TP) : M&L for carrying out repair,/replacement of the following parts and supply & fix of new parts as under of Chair revolving Model Kareen High Back as per drg
335	S&F in replacement of Seat cushion complete as per size & shape.
336	S&F in replacement of Back cushion complete as per size & shape.
337	S&F in replacement of Adjustable hydraulic system compete with outer cover
338	S&F in replacement of pedestal (Base frame).
339	S&F in replacement of PU Arms.
340	S&F in replacement of Castor wheel as per existing size.
341	CHAIR AUDITORIUM WITH/WITHOUT CUP HOLDER MODEL:GODREJ JUPITOR OR METHODEX OR EQUIVALENT (TP) : M&L for carrying out repair/ replacement of the following parts and supply & fix of new parts as under of Chair auditorium with or without cup holder of Model godrej Jupitor/Methodex or eqv as per trade pattern
342	M&L for removing chair form ground and S&F new nut & bolt of high tensile strength with double washer to fix chair in the ground as per required size & shape as directed by GE/Engr-in-charge
343	S&F new locking device for auditorium chair as required and as directed
344	S&F in Repair/replacement of the arm of the chair as required
345	S&F in new PVC back cover of the chair auditorium as required
346	S&F in replacement of Seat cushion complete including new fire retradant fabric duly upholstered as per size & shape as directed by GE/Engr-in-charge
347	S&F in replacement of Back cushion complete including new fire retradant fabric duly upholsteredas per size & shape as directed by GE/Engr-in-charge.
348	Preparing of steel base surface of chair auditorium and applying one coat of zinc primer followed by synthetic enamel paint of required colour all as specified and as directed by Engr-in Charge/GE .
349	Removing of all old fade out polish by remover/scrapper or caustic soda or any other means of without damaging surface of furniture as listed below,making the surface smooth and free from dust and applying high class french polish till glossy/shine finish obtained all as specified and as directed.
350	Almirah medium with shelves (DB-3959)
351	Table wooden of size 2.50X1.5X1.0 M WITH L/TOP (GE/BLS/F/11/71)
352	Book shelf open small (DB-4121)
353	Table Draughtsman {FD-6(M)}
354	Bin soiled linen multipurpose with ironing Board (FD/E6/MAP/09)
355	Table wooden 1.5x1x1m (GE/BLS/F/110/96)
356	Table conference with S/top {FD-8(M)}
357	Work Bench 1800x900x760 mm (FD-301)
358	Work Bench 1500x900x760 mm {FD-145(M)}
359	Equipment Table 825x825 (FD/CCE/R&D/BLS/56)
360	Equipment Table 600x600 mm (FD/CCE/R&D/BLS/56)
361	Work Table 3000x900x750 mm (GE/CDP/F/38)
362	Lab Table 1.5x1.2 mtr with L/Top (SPL)
363	Combined tray 2 spaces with pegion hole (WDF-32)
364	Bench Workshop Type B (F-42)
365	Removing of old paint, rust (by emery paper) and prepaired whole surface of table office officers steel for painting, then paint one coat of red oxide paint, then after apply one coat of synthetic enamel paint as per required colour, complete all as per directed by Engr-in-Charge.
366	Glass door Almirah steel (FD/CCE/R&D/ BLS/32)
367	Filing cabinet 2 drawers (TP)
368	Stool steel 305x305x600 mm {FD-81(M)}
369	Cabinet filing steel (TP)
370	Book shelf open large steel {FD-69(M)}
371	Almirah steel large glazed {FD-104(M)}
372	Rack adj steel 2475x900x500mm close type (TP)
373	Steel Rack 2000x950x500 mm (TP)
374	Double faced book Stack with main unit with one Extra Range (TP)
375	Double faced book Stack and unit unit (TP)
376	Locker bed side steel (FD/CCE/R&D/BLS/08)
377	Medicine chest steel (FD/CCE/R&D/BLS/13)
378	Over Bed table (FD/CCE/R&D/BLS/10)
379	IV Stand (FD/CCE/R&D/BLS/15)
380	Hospital dressing table steel (FD/CCE/R&D/BLS/12)
381	Rack side steel 975x900x500 mm {FD-106(M)}
382	Table dispensing {FD/CCE/R&D/BLS/14} Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Furniture Tenders

Furniture Items Tenders

Office Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair/Replacement Of Damage Parts & Renewal Of Office Furniture & Including Painting/Polishing Of Tp Items At (Pxe/Itr Labs) At Chandipur, Chandipur-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair/Replacement Of Damage Parts & Renewal Of Office Furniture & Including Painting/Polishing Of Tp Items At (Pxe/Itr Labs) At Chandipur, Chandipur-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us