|
| 1 | Supply and Erecting Pre Fabricated Steel Puff panel: Wall panel should be Steel PUF Panel should have two independent steel surfaces, freestanding structure, constructed from composite, free standing insulated steel Wall panels shall be made of GI 120GSM material having thickness not less than 0.6mm front and back PPGI steel 0.5mm thick. The core should consist of rigid polyurethane foam, which has been injected under high pressure, with a minimum density of 40kg/m3 and Thickness of panel for wall 50mm |
| 2 | Supply and Erecting Pre Fabricated Steel Puff panel: Celing panel should be Steel PUF Panel should have two independent steel surfaces, freestanding structure, constructed from composite, free standing insulated steel Wall panels shall be made of GI 120GSM material having thickness not less than 0.6mm front and back PPGI steel 0.5mm thick. The core should consist of rigid polyurethane foam, which has been injected under high pressure, with a minimum density of 40kg/m3 andThickness of panel for wall 50mm |
| 3 | Providing and Applying Coating: Filling of all Joints and cavities with Esdee Polyster putty for metal surface and Sanded Flush to provide a jointless finish primer with metal primer to give a bonding of paint and then sprayed with a water based liquid plastic aseptic and self sterilizing wall coating system , which protects against the growth of micro-organism, such as mould,funbgi, yeast and bacteria on its surface, Equivalent to a minimum dry film thickness of 300 micron. |
| 4 | Supply & Erection of Vinyl Flooring 2mm thick antistatic with thermal welding of joints to provide seamless Antisatict flooring system, with perfectly curved flush covings, all joints welded properly with same material .(Roll) |
| 5 | SITC OF :Hermatically SealedDouble Swing Door MOC : SS 304 Door Size : 1500mm x2100mm: MOC - SS 304 / 0.8 mm Sheet for Door Leaf Sheet MOC - SS 304 / 1.2mm thick for Door Frame Doors are designed to fit flush into the wall panel system on both sides and are supplied in different dimensions. Doors are fabricated from GI P. Coated Shutter has sheet thickness of 0.8mm and the frame of 1.2mm. Standard 50 mm panel has frame width of 50 mm and shutter width of 45mm. Doors are available in various sizes as per the requirement of the client. The following accessories are a part of the door: Shutter Thickness: 45 mm thick Stainless steel hinges Stainless Steel 'D' type of handles on pull side Stainless steel push plates on push side. Standard arm door closure (TS-68) View panel along with self adhesive tape and silicon sealant Both side key operated locking arrangement Automatic |
| 6 | SITC OF :Peripheral Lights / OT Luminaries : LED Type: Technical specifications:1. Recess mounted IP54 Protocol2. Non-hygroscopic peripheral lights.3.Size : 2ft x 2ft 4 . Sitable watts for required proper Illumination for Operation |
| 7 | SITC OF : LAF- SYSTEM CONTROL INTERFACE (3 Panel System):Theater Control Interface(TCI)With inside MOT controlling: Designed to have maximum controls within the theatre, will be located on a membrane type control panel mounted in the theatre wall. It compromises1. Digital Real time clock2.Digital Laps timer3.Set of Temperature controller, Humidity controller4.OT Light control5.Medical Gas Alarm6.Hands free telephone7.HEPA pressure monitor (Analog &/Or Digital) The panel will incorporate all the necessary controls for the correct operation and monitoring of the equipment and services with following feature -( One Pressure monitoring required out side every OT) |
| 8 | SITC OF : Surgical Scrub Automatic type MOC: SS 304 Size 1500*1000*600 mm: 1. Capacity - Two (2) Bay Scrub Sink2.Configuration - floor mounted3.Operations - Manual / Mechanical through Floor switch &/Or Elbow action4. Automatic sensor based operations.5. Hardware - Mixture valve (1 No.) and Solenoid valves (2 Nos.)6.The scrub sink is provided with front access panel for ease of maintenance & repair7. Automatic Operation Specifications: - Infrared Photo sensor Digital Timer with user defined time interval of 1,3,5, & 10 min8.MOC : Stainless Steel Grade 304, Anti-splash metal body construction polished finish9. Mixer arrangement for hot and cold water, Hot water source at Client end |
| 9 | Providing Factory fabricated cut- out in Wall & Ceiling panels for Electrical fittings & accessories. |
| 10 | Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copperconductor complete erected with glands & lugs, on wall/ trusses/ pole or laid inprovided trench/ pipe as per specification no. CB-LT/CU |
| 11 | Supplying, erecting & terminating 2C x 0.75 Sq.mm Shielded Sensor cable complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification |
| 12 | Supplying and erecting GI wire of high purity of required sizes used for earthingor any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/conduit with screws complete. |
| 13 | Providing & Fixing of Modular type Electrcial Switches and sockets complete with metallic backing box ( 2 switches + 2 sockets ) to be provided in the wall cladding panels with covering plate. 5/16 A |
| 14 | Providing and fixing wall-hung white wash basin of size 470x575x190mm ofapproved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental including S.S. bottle trap of having necessary pipe connections up to the outside face of the wall.etc complete. |
| 15 | Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved makeincluding necessary sockets/ union nut etc. complete as directed by Engineer in charge. |
| 16 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 17 | Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete |
| 18 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 19 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessaryfittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 20 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. |
| 21 | Providing and laying vitrified matt fininsh tiles having size 590mm to 605mmxto605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar includingneat cement float, fillingjoints, curingandcleaning etc. complete. |
| 22 | ADD FOR INSURANCE |
| 23 | ADD FOR GST 18% Please Enable Macros to View BoQ information |
