Supply of 1.5 TR Inverter type 5 Star rated split Air-Conditioner unit having Nominal cooling capacity of 4536 Kcal/hr (5275 watts) and as per BEE star rating minimum ISEER of 5.6 with temperature control thermistor, remote control unit, filters, rotary/scroll/swing type compressor, copper tubes for both indoor and outdoor unit, Refrigerant gas with topping up of refrigerant if required, transportation of all of the above to the various sites and supplying the following up to the length of 3 mtrs. etc as required. (1) Hot and cold refrigerant piping. (2) Suitable connecting electrical cable between indoor and outdoor unit. (3) PVC drain pipe of suitable size.Note 1) The manufacturers / Suppliers shall give a warranty of the air conditioner for 15 months from date of supply or 12 months from date of installation, which is earlier. Thereafter 4 years (48 months) additional warranty on the compressor and Indoor and Outdoor units PCB.
2
Dismantling of AC units
Dismantling of existing Split AC unit - indoor and outdoor units along with interconnecting cu pipe and cable, power connection cable etc. and storing at place shown by Exch. in charge etc. as reqd.
3
ITC of AC Units
Installation, Testing and commissioning of 1.5 TR 5 star inverter type split AC unit along with Hot and cold refrigerant copper piping, copper conductor flexible connecting electrical cable & PVC drain pipe up to the standard length of 3 mtrs. (as supplied under Item 1) including leak testing entire system, gas charging, insulating the refrigerant pipe and making opening in wall and making good the damages, making power supply connections from the power point etc. complete as required.
4
Pipe Line
Providing and fixing of additional refrigerant copper piping i. e. for Hot (gas) and cold (liquid) line of suitable size to match with the pipeline of the new split AC units, over and above 3 mtrs length wherever required along with suitable size rubber foam/insulation on surface of the wall i/c necessary flare nuts, suitably brazing with the existing pipe, clamping, making holes in walls and additional gas charging if required etc. as per site requirement complete as reqd. NOTE - The length of refrigerant pipes supplied with each AC units is 3 Mtrs. Extra length shall be paid extra for which firm shall quote their unit rates. (Only single run will be measured for both (i. e. hot (gas) and cold (liquid) line) refrigerant pipes.)
5
Connecting Cable
Supplying and laying 4 core 2.5 sq.mm. PVC insulated and PVC sheathed flexible copper cable along with refrigerant pipe or along with existing conduit / cable tray i/c binding with plastic tags for extending supply from existing industrial socket to indoor unit etc. as required. (Make- any ISI mark). NOTE- The length of Copper Cable supplied with each unit is 3 Mtrs. Extra length shall be paid extra for which firm shall quote their unit rates.
6
Angle Iron
Supplying and fixing of iron stand made out of 40mm x 40mm x 5mm thick angle iron for mounting outdoor unit of the above AC as per manufacturer i/c providing other necessary hardware, painting etc. complete as required.
7
MS Stand
Supplying & fixing of Powder Coated MS frame stand comprising of Two numbers bracket made of heavy duty MS Sheet to accommodate the Condenser (Outdoor) unit for fixing on the wall with suitable diameter and length of Anchor fast bolts and making good the damages etc. as per site requirement.
8
PVC Pipe
Supplying and Fixing of 25 mm dia ISI mark heavy duty PVC pipe with accessories for drain water connection, over and above 3 mtrs length wherever required etc. complete as required.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
