|
| 1 | Dismantling Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings. |
| 2 | Dismantling of timber scantling 40 Sq cm and over in section in any position as in unframed |
| 3 | Dismantling of timber scantling under 40 Sq cm in section in any position as in unframed work as in fillets, rails, posts, rafters, purlins etc |
| 4 | Taking down wooden roof trusses, coupled rafters or trussed beams clear span above span 4mtrs and upto 8mtrs |
| 5 | Dismantling of ceiling boards any thickness including cover fillets. |
| 6 | S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (GdeE- 250)qualityA |
| 7 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) qualityA |
| 8 | S&f for Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long diameter of neck in mm exc 20 and n exc 25 |
| 9 | S&F for Plates (plain or chequered) of Fe 410 -W (Gde- E- 250) quality- A as in channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc |
| 10 | M& L for Formwork to bed plates sides of pillars,posts, struts, piers, columns and stanchions → (horizontal or sloping) complete all as specified and directed. |
| 11 | M& L for PCC type B1 1:2:4 (20mm graded aggregate) for Bed block Providing, cement concrete in roof kerbs or mud stops, benching rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; in benching on chajja, parapet wall and sides of wall etc. seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not rovided for watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 12 | M & L for Preparation of New steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 13 | S&F pre - painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 14 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 15 | S&F for false ceiling work of aluminium anodised snap grid frame work, size of grid 605 X 605mm , 6mm thick Everest designer boards or equivelent fixed Aluminium frame work with screws, including hangers 6mm dia, G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 X 3mm size 60mm long as in ceilings complete all as specified. |
| 16 | Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc. |
| 17 | Demolition of brickwork or stone/boulder masonry, built in CM including all quoins arches pillars etc. |
| 18 | M&L for Brickwork with sub- class 'B' bricks, straight or curved on plan exc 6 m mean radius,Old size brick built in Cement mortar 1:4 . |
| 19 | M&L for 15 mm thick cement plaster in CM 1:6 on Brick or concrete surface finished even and smooth without using extra cement all as specified |
| 20 | M&L for 15mm thick external plastering in CM (1:4) with water proofing compound on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed. (Water proofing compound will measured and paid separately) |
| 21 | M&L for Preparation of new surface of wall and applying two coat of oil emulsion distemper over a coat of primer over on internal walls surfaces complete all as specified and directed. |
| 22 | M&L for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm on new surface complete over two coat of dmprf white all as specified and directed. |
| 23 | Supply only water proofing compound |
| 24 | M&L for complete removal of existing surface finishes of external wall preperation of surface and providing and applying 3mm wall care putty over plastered surface to prepare the surface even and smooth and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot Tinted) wit silicon additives @ 1.43litre/10sqm over and including priming coat of exterior primer applied @.9 litre/10sqm over two coat of dmprf on new surface complete all as specified and directed. |
| 25 | M&L for complete removal of existing treatment on wall and applying two coats of oil bond distemper over & including one coat of primer complete all as specified and directed. |
| 26 | Taking down chowkat or frame with shutter (without taking off shutter from the frame ) area n exc 1.5 sqm each. |
| 27 | Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5 sqm but n exc 4 sqm each |
| 28 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC ultichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 29 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 30 | S&F for Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS 1856 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles apparature of diamond shape grills of 75mm and fixing approved powder coated aluminium standard section around the opening all complete as per requirement and direction of engr-in-charge. |
| 31 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 45x85 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately. Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkats of size 65x125 mm complrising of virgin PVC polymer of K value 58-60(Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2, moudules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge.Note : For WPC solid door/window frames minus 5 mm tolerance in demension ie depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 33 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 34 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed door shutter of size 35mm thick open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded mitred and rebated sash bars any number & fitted with cut and mitred beads for securing glass, etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 35 | S&F sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm each pane 4mm thick. |
| 36 | S&F Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed. |
| 37 | S&F in repairs Aluminium alloy wire cloth 0.45 mm nominal dia.of wire and average width of aperture 1.40 mm and and fixed with aluminium wire staples/wooden beads fixed. |
| 38 | S&F for Door closer hydraulically regulated,designation No, 3,universal type, suitable for door shutters of 851 to 1000 nun in width and of weight between 61 to 80 kg and fixed (aluminium) |
| 39 | S&F for Floor door stopper of aiuminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor, Overall length of cover plate 150mm |
| 40 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300 mm long. |
| 41 | S & F Butt hinges, medium weight cold rolled mild steel and fixed 100mm long. |
| 42 | S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 200mm long. |
| 43 | S & F Aluminium handles cast type anodised 150 mm long.. |
| 44 | M&L for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. Half brick but not exc one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed |
| 45 | S&F for MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts if required, hooks (stay) heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed |
| 46 | S&F for MS Hand rails, half round or other steel section or core for wooden drilled and countersunk forbalusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 47 | S&F in repairs Turbo ventilator with base plate on rooftop with ventilator vanes of Industrial Hi-Grade 8011 H-14 aluminium, weight of 6.5kg +/- 0.2kg, ventilator top plate (dia 500mm +/-5mm) and bottom ring (dia 600mm +/- 15mm) of stainless steel (0.5mm thickness), having following dimensions Height - 410mm +/- 5mm, Centre Width - 735mm +/- 5mm, no. of vanes shall be 42 nos Die pressed with each vane of 0.5mm +/- 0.02mm thickness with 2 nos of bearings of 6001 ZZ permanently lubricated and sealed type. The base plate shall be of E-Glass chopped strand matt(thermosetting polyester resin with hardener (MEKP - AO-9%) and accelerator (Cobalt Octate - 3%)) with profile design customised as per site requirement specified and directed by Engr-In- Charge.Note: The quoted unit rate shall includes taking down of existing turboventilator. Please Enable Macros to View BoQ information |
| 48 | S&F in repairs Turbo ventilator with base plate on rooftop with ventilator vanes of Industrial Hi-Grade 8011 H-14 aluminium, weight of 6.5kg +/- 0.2kg, ventilator top plate (dia 500mm +/-5mm) and bottom ring (dia 600mm +/- 15mm) of stainless steel (0.5mm thickness), having following dimensions Height - 410mm +/- 5mm, Centre Width - 735mm +/- 5mm, no. of vanes shall be 42 nos Die pressed with each vane of 0.5mm +/- 0.02mm thickness with 2 nos of bearings of 6001 ZZ permanently lubricated and sealed type. The base plate shall be of E-Glass chopped strand matt(thermosetting polyester resin with hardener (MEKP - AO-9%) and accelerator (Cobalt Octate - 3%)) with profile design customised as per site requirement specified and directed by Engr-In- Charge.Note: The quoted unit rate shall includes taking down of existing turboventilator. Please Enable Macros to View BoQ information |
