|
| 1 | Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead.. complete as per the direction of the Engineer-in-charge |
| 2 | Earth work in ordinary soil with initial lead and lift including rough dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site with initial lead of 50 mtr and all lifts, including shoring, shuttering & dewatering (if required) with cost of labour, labour cess, hire & running charges of all machineries, sundries & T&P required for the work complete as directed by the Engineer in charge. |
| 3 | Providing & laying cement concrete of prop. (1:4:8) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 4 | Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries, T&P required for the work etc complete in all respect excluding GST as directed by the Engineer-in-charge. (Measurement will be taken on finished compacted section only.) |
| 5 | Filling foundation trenches and plinth with excavated materials including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 6 | R.C.C. work of M-25 for following works having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth steel centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding centering & shuttering and cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 7 | Footing |
| 8 | Plinth Beam |
| 9 | Column |
| 10 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 11 | Providing & fixing of Rigid smooth centering and shuttering for R.C.C. works including false works and dismentalling then after casting including cost of materials complete in all respects as per drawing, design and direction of Engineer-in-charge |
| 12 | Footing |
| 13 | Column & Beam |
| 14 | Brick work in foundation and plinth with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 15 | Brick work in superstructure with flyash bricks of size 25x12x8cm in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 16 | C.C. work of (1:2:4) using 12mm size crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete , watering and curing for 28 days, and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 17 | Providing 16 mm thick cement plaster to the inside surface of brick masonry wall in cement mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading, royalties of materials, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. |
| 18 | 12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using screened & washed sharp river sand for mortar with approved quality of cement, finished smooth to the even surface of the brick masonry walls after racking out the joints properly ,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners etc. required for the work complete in all respect excluding GST as directed by the Engineer- in- charge. |
| 19 | Painting to external surface of building with two coats of weather coat over a coat of water based primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 20 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall, including providing and fixing and 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre, including two coats of approved enamel paint over a coat of red oxide primer for angle iron complete in all respect excluding GST as directed by the Engineer-in-charge |
| 21 | Supply, fitting & fixing of Y’ shaped angle iron (50x50x6) with anti-climbing spikes placed 2.4m or 3.00 m apart,flat ,angle etc. includding cutting & mending to the proper sizes ,welding ,cost, conveyance, labour required for the work complete in all respect and as directed by the Engineer-in-charge. |
| 22 | Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work complete in all respect as directed by Engineer-in-charge. |
| 23 | Supplying all labour, T&P for the Carriage of excavated earth/dismantled material by mechanical means upto 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 24 | Providing and fixing of Main Gate by using M.S. tube of approved size by welding etc. for substructure for panels, screens etc. complete inclusive of cost and conveyance of all materials, fittings, fixtures, cost of all labour,sundries, T&P, scaffolding/staging required for the work all complete as per the direction of Engineer-in-charge.. |
| 25 | Providing 10mm thick and above 0.40 Sqm size granite tile cladding of approved quality, colour and size in walls( near gate) at all height on 12mm thick bed of cement mortar of mix (1:3) (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the granite including cost, conveyance, loading, unloading, royalties, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 26 | N.B - (i) The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed. (ii) Sample of materials/ shall be approved before procurement and use. Please Enable Macros to View BoQ information |
