|
| 1 | Dismantaling existing plaster including disposal of refuse as directed by Engineer-in chage with in a distance of 60 meter (200 feet)60mt.(200feet |
| 2 | Dismantaling cement concrete or brick or granolithic floos including base concrete and including stacking of materials as directed by Engineer-in chage with in a distance of 60mt.(200feet) |
| 3 | scrapping old and white or colour wash including disposal of refuse as directed by Engineer-in chage with in a distance of 60 meter (200 feet)60mt.(200feet) |
| 4 | 12 mm cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded |
| 5 | Providing and applying white cement based putty of average thickness of Imm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth including cost of material, labour T&P etc all complete. |
| 6 | Finishing wall with exterior emulsion paint(apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Itr/10 sqm. Including on one coat primer applied @ 0.75 Itr/10 sqm. Coat curing and cost of all materials labour T&p etc. required for proper completion of work for two coat |
| 7 | S/F of 5mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement, c-sand mortar finished with white slurry jointing and polishing etc all complete.(sch no.11.46) |
| 8 | Providing and laying of 8 to 10 mm thick ivory or light shade Vitrified tiles of 600 mm x 600 mm size in flooring or skirting laid with 1:3 cement mortar (1cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete (sch no11.49) |
| 9 | SUPPLY & FIXING of flush door commerical quality corforming to is 2202 part 1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hingees bolt, handeles |
| 10 | 1000 Ltr.water tank etc all comp. |
| 11 | S/FIXING OF 1.50 H.P Subemercible pupm I.S.Imarka 2002 L.M.P. 60Mtr head(ie Kirloskar, K.S.B. Cropton make etc.)in all cost complete |
| 12 | Mild steel or iron works of tubler (rounded or square pipe including including cost of bolt, nuts if required for and welding, grinding and making holes as required for completion of work. |
| 13 | Providing and laying in cement concrete 1:5:10 (1cement: 5 coarse sand(III): 10 graded stone aggregate 40mm nominal size) and curing complete, including cost of formwork in foundation and floors. PWD (SCH) 4.1.10 |
| 14 | Providing & Fixing meshes S.S Mosquito Proof jaali etc all comp.work Chapter no.19 SL NO 8 |
| 15 | Supply and fixing of anodized aluminium partition having 2mm thick aluminium section partly glazed and partly 12mm thick laminated board Aluminium board size 83.50 x 44.65mm as vertical member and 11.40 x 44.45 as bottom and horizontal member with all fitting glass panes of 4mm thick handle and locks comp. |
| 16 | Earth work in cutting or in embankment in ordinary soil excavation to be done form of regular pits not excding 1/2M. in depth and work embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5m lift and 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. distance as directed by Engg. |
| 17 | Construction of granular sub base (GSB) by providing coarse graded mater as per clause 401. |
| 18 | Providing & laying of Rubber moulded Interlocking 80mm etc. all comp work |
| 19 | Cartage of earth up to 3.00 km etc. comp work |
| 20 | Add Gst Please Enable Macros to View BoQ information |
