|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15cm thickness ( below or above ground level) complete all as specified and directed. |
| 2 | M&L for 100mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in hardstanding surfaced finished even and smooth without using extra cement, complete all as specifed and directed. |
| 3 | M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed. |
| 4 | M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 5 | M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed. |
| 6 | M&L for Sand filling under floors or in foundations complete all as specified and directed. |
| 7 | M&L for Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including 20mm thick screed bed in CM 1:4 to receive floor tiles, complete all as specifed and directed. |
| 8 | 5 M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work, complete all as specifed and directed. |
| 9 | Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion natural ground and making good disturbed ground. |
| 10 | Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion in concrete, brick work, masonry etc and making good disturbed ground, complete all as specifed and directed. |
| 11 | Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil, complete all as specifed and directed. |
| 12 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat ironfillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165, complete all as specifed and directed. |
| 13 | S&F mild steel Round bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hooping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specifed and directed. |
| 14 | M&L for PCC 1:4:8 type D2 using 40mm aggregate as in foundatons, filling and mass concrete complete all as specified and as directed. |
| 15 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 16 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E- 250) quality-A, complete all as specifed and directed |
| 17 | S&F 1.00mm thick mild steel, plain,black sheet in wall cladding, steel gates and similar work cut size, holes punched, including round headed screws or welding seams including bending or turning up mitred angles etc, complete all as specified and directed. |
| 18 | M&L for preparation of new steel or iron sufaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 19 | Dismantling of fencing wire mesh of any type complete all as specified and as directed |
| 20 | Supply only mild steel galvanised chain link fencing of any size or type complete all as specified and as directed (chain link should be ISI mark) |
| 21 | Fixing for chain link fencing including line wires, any mesh, size, rails, straining bolts, etc. including provision of binding wire. (Chain link fencing and line wire shall be paid at supplied only rate) complete all as specifed and directed. |
| 22 | Dismantling of barbed wire fencing of any dia, complete all as specified and as directed. |
| 23 | S&F galvanised 2 strand steel barbed wire 2-24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured), complete all as specified and as directed. (steel barbed wire should be ISI mark) |
| 24 | Demolition of block masonary built in cement mortar including all quoins, arches, pillars, etc. and rubbish off the premises complete all as specified and directed. |
| 25 | M&L for Pre-cast cement concrete Type C1, 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10cm in width and setting in CM 1:6, complete all as specified and as directed. |
| 26 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) in CM 1:4, complete all as specified and as directed. |
| 27 | M&L for PCC type D-2 1:4:8 using 40mm graded stone aggregate in foundation, filling and mass concrete, complete all as specified and as directed. |
| 28 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping including necessary formwork, complete all as specified and as directed. |
| 29 | Deduct Schedule of Credit of as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item Please Enable Macros to View BoQ information |
