Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL WORK |
| 2 | Providing & laying Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of water pump required for the work etc complete in all respect excluding GST as directed by the Engineer-in-charge. |
| 3 | Brick work in superstructure with Aerated Autoclaved Fly ash (AAC) blocks of any approved sizes in cement mortar (1:6) having crushing strength not less than 4 N/mm2 confifming to IS:2185 immersing the bricks in water for not less than 6 hours before use (the blocks shall be free from cracks, well shaped, uniform in size includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty, labour, T&P etc. and as per direction of Engineer in charge. |
| 4 | Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-25 Grade in all type of Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies, Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) as per approved designs and drawings having a minimum compressive strength ( in work test) 25 N/mm2 in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher broken granite stone chips of approved quality from approved quarry, washed and cleaned to be mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, including cost of required steel centering and shuttering there after dismantling and removing the debrises away from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding wires and tying the grills and placing in proper position excluding GST as directed by the Engineer-in-charge. |
| 5 | Providing & fixing Thermo mechanically treated bars (Fe-500 ) Reinforcement bars of approved make for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars or tor steel and binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc. required for the work complete for the work in all heights as per the specification & excluding GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement. No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and wastage. Cost of these items shall be deemed to be included in the rates for reinforcement) |
| 6 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 7 | Supplying, fitting and fixing double charged vitrified flooring tile of premium grade using vitrified tiles having thickness of 8mm to 10mm conforming to IS 15622 ;2006(group-B) of Size(600mmx600mm) coloured /Printed series (Homogeneous) approved qualityand brand of Somany/ Kajaria/RAK, in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry, grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, Labour cess , sundries, T&P required for the work, complete in all respect as per specification excluding GST and direction of Engineer-in-charge. (Note- Sample of tiles shall be approved before procurement and use) |
| 8 | Supplying, fitting and fixing double charged vitrified flooring tile of premium grade using vitrified tiles having thickness of 8mm to 10mm conforming to IS 15622 ;2006(group-B) of Size(600mmx600mm) coloured /Printed series (Homogeneous) approved qualityand brand of Somany/ Kajaria/RAK, in DADO/ Skirting,riser of steps,wall on on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shadesof the vitrified tile if required watering and curing for 21 days,including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification excluding GST and direction of Engineer-in-charge.(Note- Sample of tiles shall be approved before procurement and use). |
| 9 | Providing ,fitting and fixing of size(30cmx60cm) size special plain/printed series ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 10 | Providing ,fitting and fixing of granite Stone plates(Above o.40 Sqm and 20mm thick )to flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 11 | Supplying , Fabrication & Erection of MS frames at all heights and levels in different shapes by using MS RHS/SHS Sections of appropriate size of TATA/Jindal or equivalent make as vertical,horizontal members fixed to the existing RCC Column/Beam/Roof Slab, by using 50mm MS Flats ,Anchor fastner of Hilti,Fishcher or equivalent make including painting of MS Structure with 2 coats of ZInc Chromite primer etc as per the direction of Engineer in Charge. |
| 12 | Supplying fitting and Fixing of Anchor fastner of 100mm Long and 8mm dia (Hilti XGN20M) anchor fasteners at 600mm c/c in zigzagas per site requirements by mechanical means including drilling holes and fixing anchor fastner to the concrete/Brick surface including all complete. etc completed in all respect as per the direction of Engineer in charge |
| 13 | Providing fitting and fixing of ISI marked 35mm thick flush doors confirming to IS:2202 (PART-1) decorative type ,core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings with 6mmthick glass vision panel of any approved size, design and quality with teak wood beading to edges including fixing of fixtures like Godrej make Mortice lock having model no 8170, Godrej make Door closure having model no 5959, 100mm hinges Godrej model no 4366, 3nos., stopper, S/S Tower bolt 200mm long,1nos as per requirement including cost of all materials, labour, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 14 | Finishing inside wall surface with cement based wall putty of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T & P etc complete as per direction of Engineer-in-charge. |
| 15 | Providing and painting internal surface two coats with Plastic emulsion paint over a coat of water based primer of approved quality and approved shade in all floors at all height by making the surface of wall smooth including cost, coveyance, loading and unloading, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 16 | Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. |
| 17 | INTERIOR FURNISHING |
| 18 | FLOORING |
| 19 | WOODEN FLOOR(ECOFIT FLOORING):-Providing & fixing 5mm thick Ecofit flooring with plank dimension 181mmx1220 mm of new hybrid flooring with a stone core. It comes with glue less locking with 0.5 mm wear layer for heavy (Class 34) & moderate commercial usage. It is led & Pthalate free material. It comes with slip resistance of >R9. It has castor chair according to EN >25000 cycle. The planks are installed over 2 mm foam and polythene sheet on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories (Skirting, Profile) etc. (Make: Squarefoot)etc completed in all respect as per the direction of Engineer in charge |
| 20 | ELEVATED WOODEN FLOOR:-Providing ,fitting and Fixing of 145mm height elevated Wooden Floor made out of two Layers 19mm thick BWR Block board (ISI) of approved make fixed over the two layers sal wood batten framing. Salwood battens of size( 50mmx50mm)are to be fixed @ 600mm C/C bothway and inter locking each other by wooden cleats , including all cost and conveyance of all materials ,labours Loading unloading T&P,all hardware fittings etc completed in all respect as per the direction of Engineer in charge.(Excluding Ecofit Flooring cost ) |
| 21 | CARPET TILE FLOOR:-Providing and laying of green certified carpet tiles thickness more than 5.5mm and size 50cmX50 cm with nylon content of 100% Tufted Textured loop pile , manufacturer using latest dyeing technology. The backing has to be non pvc backing. Tufted Pile Weight Standard 14.8 oz. per sq. yd. with antistatic, thermal resistance , sound insulation & sound absorption properties.Carpet to have fire resistance of Cfl-s1 ( with adhesion) and suitable for allergies. Product to have classification of use should be 33 commercial heavy use. The product has to be 100% recyclability with Environmental product declaration & material health statement certificate for sustainability. The product should have CRI green certified product. Rates including complete installation with backing foam, necessary stitching etc. The floor which receives the carpet to be thoroughly cleaned as per manufacturers specification. The carpet is to be laid over a bed of manufacturers approved adhesive (with VOC limit 50g/Ltr) of Arobond 44 of Colourbond Mktg. / VC 31 of Pidilite Ind) spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer in PVC or HDPE sheet of 500 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover /on commissioning. If after the protective layer is removed and stains observed in the carpet because of inadequate protection, the same shall be shampooed and made good to the satisfaction of the project managers. The measurements of carpet will be the actual laid area.etc completed in all respect as per the direction of Engineer in charge |
| 22 | FALSE CELLING |
| 23 | PLAIN GYPSUM FALSE CEILING: Suspended Plain Ceiling includes Gypserra¢â Perimeter Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. Gypserra¢â Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc¢ç soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc¢ç Rawl Plug- ¨ª8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. Gypserra¢â Intermediate channel {MaterialGI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Gypserra¢â Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of ¨ª4.2x13 Gyproc¢ç metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} The Gypserra¢â Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Gypserra¢â Intermediate Channel {Material- GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc¢ç Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge Gypboard¢ç Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres onceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc¢ç Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc¢ç Joint Paper tape.etc completed in all respect as per the direction of Engineer in charge |
| 24 | ALUMINIUM-BAFFLE CEILING: Aluminum Baffle ceiling system with powdercoated finish in wooden Finish, Baffles of height100mm and 50mm wide with 0.7mm thick AI,gap between baffles to be 150mm c/c. fitted with Aluminium sections including all materials ,labours ,T&P etc all complete as per the direction of Engineer-in Charge. |
| 25 | Providing and fixing of suspended ceiling system with prima fine fissured(mineral fibre celling board) approved microlook tiles of size 600x600mm with humidity resistance of 99% silhoutte reveal profile grid system with 15mm white flanges incorporation a 3mm or 6mm central recess. Main runner should be spaced at 1200mm c/c securely fixed to structural soffit by approved hangers at 1200mm maximum center and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greated than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centres to form 1200x600mm module. 600x600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central birdsmouth notches to facilitate fitting of 600mm cross tees. Wall angles in white colour to be secured to wall Providing and fixing of suspended ceiling system with prima fine fissured microlook tiles of size 600x600mm with humidity resistance of 99% silhoutte reveal profile grid system with 15mm white flanges incorporation a 3mm or 6mm central recess. Main runner should be spaced at 1200mm c/c securely fixed to structural soffit by approved hangers at 1200mm maximum center and not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greated than 600mm from the adjacent wall.1200mm long cross tees to be interlocked between main runners at 600mm centres to form 1200x600mm module. 600x600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central birdsmouth notches to facilitate fitting of 600mm cross tees. Wall angles in white colour to be secured to wall etc.complete in all respect excluding GST as directed by the Engineer-in-charge |
| 26 | PARTITION WALLING & DRY WALL |
| 27 | GLASS PARTITION:-Providing and fixing in position Internal 12mm thick Toughened Glass (Saint Gobain) Partition fixed with aluminium profile channel at top & bottom at required height Connected with continues Ceiling/Wall/ Floor mounted Safety connecting profile clamp fixed point at every 300mm with hexagonal socket screw complete with clip on SS mat finish covers. Floor embedded bottom mounted solid aluminium profile with self-locking along with EDPM gaskets. All joints to be sealed with clear weather silicon complete as per design & drawing . including cost, conveyance, loading, unloading, stacking of all Materials, cost of all Labour, T&P required for the work complete in all respect excluding GST as directed by Engineer-in-charge ( minimumSize of Glass Pane- 1.45x2.62mm subject to site requirement) |
| 28 | TERACOTA BLOCK PARTITION:-Supplying ,Fitting and Fixing of .Terracota Jali Blocks Partition wallling of size(200mmx200mm)and 50mm thk of any approved design fixing inside the M.S. frame with Laticreate adhesive layer not exeding 3mm thick and fixing ,welding /Nailing M.S. flat at each four Layers and painting one coat Silicon masonry paint including all complete. in all respect as per the direction of Engineer in charge |
| 29 | DRY WALL PARTITION:- Providing double wall 76mm thick Dry wall Partition with GYPROC RIGIROCK BOARD(1200mmx2400mmx13.mm)with Metal(G.I) framework partition having maximum reachable height of 3600mm satisfying L/240 criterion at 200Pa, possessing fire rating of 60mins, tested in accordance to BS-476 Part 20 & 22 & sound insulation (Rw) of 51*dB, tested in accordance to ISO 10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value of 0.50W/m²K & Severe duty rating as per BS 5234 part 2. Partition comprises of double layer, tapered edge Gypsum Board(GYPROC RIGIROCK BOARD), certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. for Unplanned loading, moisture resistance and High Impact resistance 76mm thick Gypserra¢â C-stud partition which includes single layer of tapered edge 13mm thick Gyproc¢ç Rigiorc Board (Conforms to IS 2095 Part 1 (2023) ( Type D,F,R2, H1) and EN 520 - Type D,F,I,R, H1, ASTM C-473/1396), Class 1 as per BS 476 - 7 of size 1220x2440mm is screw fixed to C-stud. 48x0.5mm Gypserra¢â C-stud {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at 610mm c/c in 50x0.5mm Gypserra¢â {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961} floor and ceiling channel. Floor & Ceiling channel is anchored to the floor & True ceiling using Gyproc¢ç Rawl plug ¨ª8x45mm {Material-IS 513 CR1 grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete grade} /Hilti XGN20MX anchor fasteners at 600mm c/c in zigzagmanner. Floor channel to be wrapped with 70¥ì Self Adhesive LDPE moisture barrier film to further improve corrosion resistance performance. 13mm thick Gyproc¢ç Rigiroc board strip of 50 mm width is placed between ceiling channel and RCC ceiling slab when deflection is more than10mm & fire rating is more than 30min. A Gypserra¢â noggin channel {Material-IS 513,Y/S-300Mpa, Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be provided at the horizontal joints of the two boards. Gyproc¢ç boards to be screw fixed with Gyproc¢ç Drywall screws of 25mm at minimum spacing of 300mm at centre and 150mm at periphery. 50mm Glass wool slab of density 20kg/m©ø shall be placed in metal framework. Glass wool holding clip should be used to hold Glass wool slab in its position. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc¢ç Pro-Fill Jointing compound, (Conforms to ASTM C475), Gyproc¢ç Joint Paper tape tape. The junction of the partition with masonry & all penetration through the partition has to be treated with Hilti/ Pyroplex fire and acoustic sealant. All other detailing and specifications to be followed as per approved drawing of Gyproc. All Gypserra¢â metal components are patent applied for. (Spl.Notes:-i) Spacing of GI C studs @600mm C/C. both way ii)GYPROC RIGIROC BOARD 13X1200X2400MM) to be used. (iii)Impct load proof.and carries 15 Kg load due to wall hanging) |
| 30 | Providing and fixing 12mm thick Toughened Glass Door Shutter of approved brand and manufacture at all height including making holes , fixing required patch fittings ( Godrej Make) & D100 floor spring 1.10m wide and 100kg(Godrej Make code no-8294)) as per design & drawing including cost, conveyance, loading, unloading, stacking of all Materials, cost of all Labour, T&P required for the work complete in all respect excluding GST as directed by Engineer-in-charge. |
| 31 | Providing,Fitting and fixing in position of S/S mat finish H type PULL Handle with Lock, Key of size( 35mm dia x 1500mm Long) for Glass doors , including cost,and conveyance of all Materials, cost of all tabot T&P required for the work etc. complete in all respect (excluding GST) as directed by the Engineer -in-Charge. ( GODREJ MAKE code no:-7781) |
| 32 | Providing ,Fitting and fixing in position of 12mm thick Toughened Glass SLIDING DOOR fixed with glass sliding door system GSS145-80 Kg(GODREJ MAKE- code no.:- 5788 ) and single glass door track T1-2m(2000mm (Godrej make . Code no-5789) sliding profile chanel at top and bottom at required height connected with continues ceiling /wall/floor mounted safety connecting profile clamp fixed point at every 300mm with hexagonal socket screw etc complete as per design and drawing including cost,conveyance,loading,unloading ,stacking of all materials cost of all labours T&P required for the work complete in all respect excluding GST as directedby Engineer -in Charge(size of Glass Pane 1.45mx2.80m or as per site requirement) |
| 33 | Providing and fixing in position Shatterproof Safety & Securty Film to internal Toughened Glass Partition printed with desired etching patten complete as per design and drawings complete including cost, conveyance of all Materials,cost of all Labour, T&P required for the work complete in all respect excluding GST as directed by the Engineer-in-charge. |
| 34 | Supplying and fixing of wall Panelling made of aluminium anodised section framing confirming to standard sections(50mmx25mmx1.50mm) as horizontal and vertical members with atleast 600 mm C/C and fixing of 9mmthick BWR ply with 4mmthick Veener pasting finished with melamine polishing etc complete as per the direction of Engineer in Charge. |
| 35 | Supplying and fixing of Black out Roller blinds by fixing powder coated top chanel, bottom chanel with bottom end Cap control unit and good quality of 0.9mm thick fabric of approved design and quality etc. including cost of all materials, labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 36 | Supplying fitting and fixing in position wallpaper of dreamz / flow / icon of Marshall or equivalent make as per approved pattern and size to the internal surface of wall or partition including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge.(Costomise wall paper/Printed) MAKE |
| 37 | CUSTOMISED FURNITURE |
| 38 | PLANTER BOX :- Supply and installation of Planter box Size(600mmx600mmx450mm) made out of 19mm thick.BWR Block Board and pasting with 1mm thick Laminates both side of any approved design including all complete as per the direction of Engineer -in Charge.. (As per approved drawings) |
| 39 | Supplying and installation of STORAGE Cabinet full height of Size (0.90mX0.45m X2.10m) with openable door shutter and four nos shelves made out of 19 mm BWR Block board with both side Laminates and locking arrangements . Inside Laminate 0.80mm thk. and Outside Laminate 1.0mm thk.The shutter should be fixed to the cabinet by auto shut hinges..All hardware fittings will be of Hettich/Ebco/Hafele make. It should be provided with plinth adjusters on the bottom including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per drawings specification and direction of Engineer-in-charge.(Front side area to be measured for Payment) |
| 40 | Supplying of Credenza (Size 1.2 x 0.45 x 0.75)M with openable door shutter made out of 19 mm BWR Block Board with two side Laminates and locking arrangements Inside Laminate 0.80mm thk. and Outside Laminate 1.0mm thk.The shutter should be fixed to the cabinet by auto shut hinges..All hardware fittings will be of Hettich/Ebco/Hafele make. It should be provided with plinth adjusters on the bottom. It should be provided with plinth adjusters on the bottom. including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification,drawings and direction of Engineer-in-charge.(Front side area to be measured for Payment) |
| 41 | Supplying and installation of Pantry Table unit with COUNTER BASIN for Dry Pantry of Size( 3.00mx0.60mx0.75m) as per approved Drawings,and made out of 19mm BWRBlock board with one no shelf and two sets openable shutters for each storage cabinet and Counter Basin unit . The shutter should be fixed to the cabinet by auto shut hinges. One stainless steel sink of size (24\\"x18\\"x10\\") (Mousumi) single Bowl to be fitted ,19mm thick prepolished granaite stone plate to be fitted on Table top with edge moulding & joint sealed with hot melt glue. It should have knockdown arrangement for fitting. .All hardware fittings will be of Hettich/Ebco/Hafele make. It should be provided with plinth adjusters on the bottom.complete as per specification, drawings and direction of Engineer-in-charge.((Front side area to be measured for Payment) |
| 42 | Supply and installation of 8 mm thick Lacquered Glass panes of size (800mmX1300mm) including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification,drawings and direction of Engineer-in-charge...(Front side area to be measured for Payment) |
| 43 | POD Cabinet :-Supply and installation of wodden POD of size (L.2.7mxB.1.5mxH.2.10m) with centre table and Cushion seat using 19mm thick BWR block Board ,75mm thk.High density foam cushion with Leatherette cover ,1mm thick laminate pasting to block board surface , etc as per drawing . All hardware fittings will be of Hettich/Ebco/Hafele make including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 44 | Supplying and installation of PANTRY Top storage Cabinate of Size( 3.00mx1.00mx0.25m) made out of 19mm BWR blockboard for PANTRY UNIT with shutter and shelves as per approved drawings . and design The shutter should be fixed on to the cabinet by auto shut hinges. It should have knockdown arrangement for fitting. .All hardware fittings will be of Hettich/Ebco/Hafele make. complete as per specification and direction of Engineer-in-charge. |
| 45 | Supplying and installation of Conference Table for 12 persons Size (4.50mX1.2m X0.75m) made out of 2 Layers 19 mm BWR Block board with both side Laminates as per drawings . Inside Laminate 0.80mm thk. and Outside Laminate 1.0mm thk..It should be provided with plinth adjusters on the bottom including cost, conveyance, loading, unloading, taxes of all materials, cost of all labour sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge..(Front side area to be measured for Payment) |
| 46 | Supplying and installation of Reception Table of Size( 2.70mx0.75mx0.90m) made out of 19mm BWR Block board with Drawer and openable shutter as per approved drawings &design .Front side of Table fitted with 5mm thick MDF fluted board with Duco spray painting ,Table top and Edges fitted with 6mm thick Sold surface ( Korian Board), .The shutter should be fixed to the cabinet by auto shut hinges .All hardware fittings will be of Hettich/Ebco/Hafele make. complete as per specification and direction of Engineer-in-charge..(Front side area to be measured for Payment)) (As per approved drawings) |
| 47 | Supplying ,fitting and fixing of Wall fitted BREAK FAST TABLE 450mm wide ,using 150mmx40mm sal wood wall frame and brackets ,Table top made of 19mm thk. Block bozrdwith 19mm thick granite Top including edge grinding laminate fixing to bottom surfaceof block board.including all complete as per direction of engineer -in Charge.(Front side Length to be measured for Payment) |
| 48 | MODULAR FURNITURE |
| 49 | Alpha Medium (Black) Back Mesh Chair* AN 70 Mesh* Centre Tilt Mechanism* Fixed Arms* Nylon Base* Fabric Upholstered Cushion Seat(Suggested at Coworking areas, Training and skill development centre, Mentoring room, Advanced co-working spaces, admin and office spaces, CEO room's support staff, Reception, Hardware and test measurment lab) |
| 50 | Loop with Desk and Book Rack*Cafeteria Chair* Polypropylene Seat & Back With Cushioned* Powdercoated Sledge Legs (Suggested at Training and skill development centre) |
| 51 | Astro High Back Mesh Chair* Headrest* AC 60 Mesh* Single Lock Synchro Mechanism* Adjustable Lumbar Support* One Way Adjustable Arms (Height)* Nylon Base* Fabric Upholstered Cushion Seat Suggested at COnference and meeting Rooms) |
| 52 | FP Invention Visitors Chair*Chromeplated Sledge Base* Fixed Arms*Leatherette Seat & Back ( Bodytouch)(Suggested at admin and office spaces, CEO and support staff area) |
| 53 | Sherwood High Back Chair* Height adjustable Manager Chair* Breathable Top grain leather upholstery* Thick Double Layer board Design, Strong Supports* Solid Wood armrest with leather upholstery* Down feather surface+High Density Foam, More comfortable thantranditional chairs* Title Mechanism with 4 position lock* Solid wood base,* 60 Distance TUV4 gaslift*60 mm PU castors past BIFMA Testing(Suggested at CEO room) |
| 54 | W SERIES- SINGLE SEATER SOFA WITH ARMS SIZES:700L X 665D X 775HTSIZES:700L X 665D X 775HT(Suggested at CEO's support staff) |
| 55 | W SERIES -TWO SEATER SOFA WITH ARMSSIZES:1200L X 665D X 775HTSIZES:1200L X 665D X 775HT(Suggested at CEO and suppport staff, pantry, Reception and Working pods) |
| 56 | LUCAS POWDERCOATED Prelam Hydroshield Top SIZES:800L x 800D x 750H.(Suggested at pantry) |
| 57 | CENTRE TABLE-SQUARE SHAPE SIZES:600WX600DX 450H(Suggested at CEO's support staff, and Reception) |
| 58 | CENTRETABLE-RECTANGLE SHAPESIZES:1050WX600DX 550H(Suggested at Reception) |
| 59 | MULTIPURPOSE RACKSIZES:1500L x 450D x 2100H(Suggested at Storeroom) |
| 60 | TANG CHAIR POLYPROPOLINE(Suggested at Pantry) |
| 61 | LEAF BAR CHAIRLeaf barstool with solid wooden legs(Suggested at Pantry) |
| 62 | CYLVIA POUFFE* Lounge Single Seater Sofa* Fabric Upholstered Cushion*Dia 490 / 390 x 450HSuggested at coworking areas) |
| 63 | COLLABORATE LINEAR WORKSTATION SIZES:1200W X 600D X 1100HSpecifications:Table Top: Made of 25mm thick prelaminated particle board of approved shade. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Under Structure Support: Table top is supported on MS Powder coated Collaborate Legs constructed by using Specially tooled & specifically designed Diamond shape 50x25x1.6thk ERW Tube – 16g, strong Leg bush & levellers made of Acrylonitrile butadiene styrene (ABS),Wire Management: 250mm Ht Racway with 65mm Dia Wire Manager GrommetMain Screen: 18mm thick Fabric magnetic screen on powder coated studs.Intermediate Screen: 8mm thick Coloured Glass(Suggested at Coworking areas, training and skill development centre, Advanced coworking areas, admin and office spaces, handware and test measurement labs) |
| 64 | ZEN EXECUTIVE TABLE SIZES:1800L X 900D X 750HTTable Top: 25mm thick pre laminated particle boardwith matching PVC edgelippingSupport: 25mm thick pre particle board with matching PVC edge lippingModesty Panel: 1200 x 450HT- 18mm thick pre particle board modesty panel of450mm Ht.Side Screen: 25mm thick pre lam particle board with matching PVC edge LippingSide Storage: 25mm thick pre lmainated particle board with sliding shutters.Wire Management: 300 aluminium flip up with soft closure and provision to mountswitches and sockets on PVC cable dump(Suggested at CEO's room) |
| 65 | PERFORM TEACHER'S TABLE SIZES:1500L x 600D x 750HTable Top: Made of 25mm thick prelaminated particle board of approved shade.Understructure: MS podwer coated 60X40mm legs and supporting MS cross beams (40X20mm) Suggested at Training and skill devellopment centre, mentoring room, and admin and office spaces) |
| 66 | CONFERENCE TABLESIZE: 4200W X 1500D X 750MM HT TABLE TOPSpecification:Table top: Made of 25mm thick prelaminated particle board of approved shade. All the edges of conference table surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Under Structure Support: 25mm thick PLT gable end.Modesty Panel: 18mm thick 450mm ht plt modesty panel is considered.Wich is machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC.Wire Management: 450mm Anodised flip up Made of Aluminum in anodised finish, which has soft closure and three way wire acess & PVC cable tray.For entry of cables from the floor into the cable tray, Wire Entry covers are provided between the intermediate legs with separator for entry of power and data.Suggested at conference room. |
| 67 | CPU TROLLEYFinish: STD Black Suggested at workstations |
| 68 | INTERNAL PH Work |
| 69 | Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 550x400 mm of Hindware make with CP waste coupling nut and 15mm x 450mm PVC connection pipe with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. |
| 70 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 71 | Supplying all material, labour T&P and fixtures of (a) Liquid Soap Container – Glass container or Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brass screws or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification. |
| 72 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia pillar Cock of any approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 73 | Supplying all material, labour T&P and fixtures for providing and fixing of stain less steel sink with drainboard of Nirali Elegance 1045x510mm or equivalent type of approved make with its components like 32mm CP waste of cat no ALD 705, 40mm waste pipe etc, including all requisite fixing materials complete as per the PH specification and direction of Engineer-in-charge |
| 74 | Supplying all materials, labour, T&P and fixing standard sized sink cock (Long Body) of any approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 75 | Providing and fixing circular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge |
| 76 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe SCH-80 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) |
| 77 | 20 mm dia |
| 78 | 25 mm dia |
| 79 | 32 mm dia |
| 80 | Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80 confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) |
| 81 | 40mm dia |
| 82 | 50mm dia |
| 83 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 84 | 75mm dia |
| 85 | 110mm dia |
| 86 | Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. |
| 87 | 110mm dia Single T Junction with door |
| 88 | 110mm dia Plain Bend |
| 89 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 90 | Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 91 | Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. |
| 92 | Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. |
| 93 | Internal Electrical Work |
| 94 | Circuit Cum Wiring |
| 95 | Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed 2 mm thick PVC conduit with modular switch and earthing the point with 1.5 sqmm FRLSH PVC insulated copper conductor single core cable including providing modular box with cover of requisite number of modules including providing cover plates as required. |
| 96 | Single light point controlled by one 6A switch or first light point of group control. |
| 97 | Subsequent point of group control |
| 98 | Twin control light point with 1.5 Sqm.m FRLS PVC insulated copper condutor single core cable in surface / recessed PVC conduit 2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 Sqm.m .FRLS PVC insulated copper conductor single core cable etc as required. |
| 99 | Supplying and fixing two module steeped type electronic fan regulator with proper modular plate switch box including connections etc. as required. |
| 100 | Supplying and fixing 6 Amp plug with 6 Amp switch (Modular Type) on existing switch board. |
| 101 | Supplying & fixing of suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin 5/6 amps modular socket outlet and 5/6 amps modular switch etc. as required. |
| 102 | Supply, installation, testing & commissioning of 6 / 16 Amp Plug Boards consisting of a 16 Amp clip-in type modular switch with indicator and a 6/16 Amp clip-in type modular shuttered plug socket fixed on metallic concealed box including interconnections and making good the damages caused complete as required and as per direction of Engineer-in-charge. |
| 103 | Supplying, installation, testing & commissioning of 20 Amp AC starter switch with 20 Amp modular socket outlet with 25 Amp Plug on surface or in recess, on 2 Nos two module GI box with plate etc. complete with direction of Engineer-in-charge. Starter-Crabtree(cat no-ACTO202504) or equivalent. |
| 104 | Wiring for circuit/ submain wiring along with earth wire of following size of FRLSH heavy gauge PVC insulated copper conductor single core cable in heavy duty PVC conduit laid in surface/ recess as required. |
| 105 | 2X2.5 + 1X2.5 sqmm FRLS Cu wire |
| 106 | 2X4 + 1X2.5 sqmm FRLS Cu wire |
| 107 | 2X6 + 1X2.5 sqmm FRLS Cu wire |
| 108 | 4X10 + 2X4 sqmm FRLS Cu wire |
| 109 | Fan & indoor Fixtures |
| 110 | Supply, delivery and fixing of Ceiling fan hook box made out of 18 swg GI sheet and containing 10 mm dia round ms bar projecting atleast 150mm on either side & duly bent to accommodate ceiling fan down rod bolt & having earthing arrangement as per direction of Engineer-in-charge. |
| 111 | Supplying, installation, testing and commissioning following type of light fixture with all other accessories, as required.(The colour temprature shall be between 5000 deg K as per application). |
| 112 | Fully diffused type Recessed/surface mounted 2'X2' LED fitting (3600 Lumen/ 36W) similar to Wipro (CAT No:CRCO10R036HP57G3)/ Equivalent of Philips/ LT. |
| 113 | Fully diffused type Recessed/surface mounted round type LED fitting (1800 Lumen/ 18W) similar to Wipro (CAT No:LD06-221-XXX-57-RF*)/ Equivalent of Philips/ LT. |
| 114 | Fully diffused type Recessed mounted/surface or Hanging type 4' Linear LED fittings (3000 Lumen/ 30W) similar to Wipro (CAT No:LM34-401-XXX-57-WG2L)/ Equivalent of Philips/ LT. |
| 115 | Commercial Batten type wall or surface mounted 4' LED fitting (2000 Lumen/ 20W) similar to Wipro (CAT No:LL24R-251-XX-57-2F) / / Equivalent of Philips/ LT. |
| 116 | Fully diffused type Recessed/surface mounted round type LED fitting (300 Lumen/ 3W) similar to Wipro (CAT No:LD38-200-XXX-30-XX)/ Equivalent of Philips/ LT. |
| 117 | 5mtr Cove strip type LED fitting (1500 Lumen/ 15W) similar to Wipro (CAT No:LG40-050)/ Equivalent of Philips/ LT. |
| 118 | Supplying and fixing of call bell/ buzzer suitable for single phase, 230 V, complete as required. (Make: Panasonic/ Havells/ Cona) |
| 119 | Supplying, installation, testing and commissioning of ceiling fan (5 star rating) including wiring the down rod, earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). |
| 120 | 1200 mm sweep |
| 121 | Supplying, installation, testing and commissioning of wall mounted fan (5 star rating) including earthing etc as required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells). |
| 122 | 400 mm sweep 1300 RPM |
| 123 | Supplying, installation, testing and commissioning of Heavy Duty Exhaust fan (5 star rating) including louvres, Ceiling Rose & Electric Connection as required. (Make -Bajaj/Usha/ Crompton/ Orient/ Khaitan/ Havells) |
| 124 | 300mm sweep 900 RPM |
| 125 | DB & MDBs |
| 126 | UPS PANEL(O/G) |
| 127 | One (1) no Incomer- 63 Amp FP ,10 KA MCB with 3 Nos Phase indicating lamps with control fuse/ MCB Digital Voltmeter and Ammeter with selector switch with required other accesories. |
| 128 | Busbar - 100 Amp,10KA Cu TP2N busbar suitable for operation at 415 Volt, 50 Hz, 3 Phase supply |
| 129 | Four(4) - Outgoing Feeders for (2 Nos of UPSDB- 1,2 & Two spares) each Comprising of |
| 130 | One (1) - 32 Amp 4P, 10 KA MCB (C-Curve) |
| 131 | PANEL AS ABOVE |
| 132 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (For all Floor DBs) |
| 133 | 12 way Single metal door |
| 134 | Supplying and fixing following rating MCBs/ Isolator/RCCB in the existing MCB DB complete with connections,testing and commissioning etc. as required. |
| 135 | 63 Amps, TPN 10 KA MCB (C-Curve) |
| 136 | 25 Amp to 32 Amps, TPN 10 KA MCB (C-Curve) |
| 137 | 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) |
| 138 | UPS & Other Accessories |
| 139 | Supply, Installation, Testing & Commissioning of 10 KVA Online UPS IGBT based True Online Smart Double conversion efficiency UPS and True Online Double Conversion with DSP Control Technology for High Performance with 3 PHASE I/P & 3 PHASE O/P with Isolation Transformer make Battery Rack with 30 Min Back Up on 90 % Running load along MS Battery KBS Rack & Battery inter connection link with standard make GE/ Emersion-VERTIV/ SIMENSE /ABB/ gutur/ Libert/ APC/Fuji/Aispl or equivalentreputedmakeA catogoryaccessories for installation.with Suitable Battery Bank for 30 minutes with VRL SMF Battery for (Exide/Quanta/Aispl Make) & all required accessories to complete the job including all connection. LOAD OF emergency) as per direction of Engg.-in-Charge. Warrenty period of all accessories & component & system mustbe 1 years & compelete test certificate must be submitted along with ups including component list & SLD. |
| 140 | Conduits |
| 141 | Supply, delivery and laying of following sizes of medium class PVC Conduit concealed in wall/ column/ roof slab of the building alongwith other accessories and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data cable wiring as required other accessories as per direction of Engineer-in-charge. |
| 142 | 20mm dia |
| 143 | 25mm dia |
| 144 | Earthing and Lightning Arrester |
| 145 | Earthing |
| 146 | Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 4.5 metre long with arrangements for fitting/ termination of G.I. flat / wire with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 147 | Providing and fixing of 8 swg GI Wire on surface or on recess as required. |
| 148 | Tray and Race Way |
| 149 | CABLE TRAY |
| 150 | Supply, fabricating and installing following size of hot dip G.I. perforated type cables trays including suspending from ceiling with angle, rods connection pieces, horizontal vertical bends, reducers, tees, cross members,G.I. nut bolts, G.I. washers, fasteners etc. complete as required per specifications & approved by the Engineer Incharge. |
| 151 | 300 mm (W) X 50 mm depth X 1.2 mm thickness |
| 152 | 150 mm (W) X 50 mm depth X 1.2 mm thickness |
| 153 | Raceway |
| 154 | Supply, laying, testing & commissioning GI raceways made of pre-galvanished sheet (DX51D Z120 MAC) with thickness of 1.5mm & 25mm height for distributing LV and ELV cabling in screed floors installations. Can be combined with junction boxes, backboxes (floorboxes) for wiring devices, fixing and coupler accessories. Consist of body & cover. Cover fitted on to the body with screws & can be opened easily if required. Particularly suitable for applications requiring EMC screening. Protection level should be IP 20 & IK 08. Standard length should be 2.44 mtrs. Confirms to standard EN 60-670, EN 50 085 - 2 - 2 & IEC 61534-22. Resistance to vertical load applied through small surface area should be 1500 N & Resistance to vertical load applied through large surface area should be 3000 N. Linear impedance in mili ohm /m of metal raceways length 5 mili ohm/m.Race ways should be supplied with complete accessories i.e. fixing brackets & couplers for joining raceways from the same manufacturer. Make:- Legrand/MK/OBO |
| 155 | 225 x 25 , 3 compartment 1.5mm thickness |
| 156 | Junction Box: |
| 157 | Supplying, instalation, testing & commissioning of Junction boxes for direct acess to cables at the intersection of raceways. Supply completely with base and cover plate (Lid) with height adjustable feature from 65mm to 90 mm. Confirms to standard EN 60-670,EN 50 085 - 2 - 2 & IEC 61534-22. For adjustable junction box, resistance to vertical load applied over a small surface area should be 500N & resistance to vertical load applied over a large surface area should be 2000N. Use junction box with fly over for direct acess to cables at the intersection of floor raceways while maintaining perfect separation and 90 degree cross overs between data and power cables.Make : Legrand/MK/OBO |
| 158 | 372 mm x 372 mm x 60 mm Junction Box |
| 159 | Floor Box: |
| 160 | Supply & Installation of floor box for which back box made of pre-galvanished sheet for mounting LV & ELV points on floor Consist of back box , lid & trim.Height adjustable from 65-90mm for mounting of tile/marble on the top. Cover fitted on to the back box can be opened easily if required. Protection level should be IP 20 & IK 08. Standard size of back box 325 X 325mm is required. Confirms to standard EN 60-670, EN 50 085 - 2 - 2 & IEC 61534-22. Resistance to vertical load applied through small surface area should be 1500 N & Resistance to vertical load applied through large surface area should be 3000 N. Floor box should be supplied with complete accessories i.e. flat plate/waved plate & WD from the same manufacturer. Make : Legrand/MK/OBO |
| 161 | Miscellaneous-Supply & fixing of Safety Equipment |
| 162 | 415KV Rubber Mat(1M x 2M x 2.0MM) |
| 163 | Shock Treatment Chart & SLD |
| 164 | Safety Gloves |
| 165 | Two sided EXIT LED Light fitting signage(both side visible) with built in battery back-up for 2 hrs with proper wiring with PVC conduiting from the existing power sources for all floors etc. Make:- BAJAJ (CAT No : BESL O3 LED SSD WBB Green) / Equivalent. |
| 166 | HVAC(ducting)-Supply, installation, balancing and commissioning of Factory fabricated GSS sheet metal oval/rectangular/round ducting As per SMACNA 2005 complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings of following sheet thickness complete as required. Sheet Make - SAIL /Jindal/ Bhusan / TATA |
| 167 | Thickness 0.63 mm sheet (24 Guage) |
| 168 | Thickness 0.80 mm sheet (22 Guage) |
| 169 | Thickness 1.00 mm sheet (20 Guage) |
| 170 | ADP-Supply, installation, testing and commissioning of 16 G GI Duct Volume control damper, complete with neoprene rubber gasket, nuts, bolts, screws, linkages, flanges etc as required. Make : Systemair / Airmaster/ Carryair |
| 171 | Supply, installation, testing and balancing of square shape powder coated Extruded Aluminium diffusers with Aluminium collar damper for Supply air, removable core & anti smudge ring & dampers as per approved shop drawings |
| 172 | Supply, installation, testing and balancing of square shape powder coated Extruded Aluminium diffusers without damper for Return Air as per approved shop drawings |
| 173 | Supply, installation, testing and balancing of powder coated Extruded Aluminium air Grilles with Aluminium collar dampers for supply air in accordance with the approved shop drawings. |
| 174 | Supply, installation, testing and balancing of powder coated Extruded Aluminium air Grilles without dampers for return air in accordance with the approved shop drawings. |
| 175 | Supply, installation, testing and balancing of Round shape powder coated Extruded Aluminium diffusers with Aluminium collar damper for Supply air, removable core & anti smudge ring & dampers as per approved shop .. 315 mm Dia |
| 176 | Make : Systemair / Carryair/ Air Master |
| 177 | Supply, Installation, Testing & Commissioning of Fire retardant type Double layer Flexbile Canvass Make : Any Reputed make with Fire Resistant Certificate |
| 178 | Thermal Insulation-Supply , Installation , Testing & Commissioining of Insulation material shall be Closed Cell Elastomeric Nitrile Rubber with anti microbial properties. Thermal conductivity of insulation material shall not exceed 0.033 W/(m.K) at mean temperature of 0C as per EN 12667. Moisture Diffusion Resistance Factor or ‘µ’ value of insulation material shall be minimum 10,000 without any external barrier as per EN 12086. Water Absorption by Volume of insulation material shall be < 0.2% as per ASTM C 1763 / ASTM C 209. The insulation material shall have fire performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame and also passes Fire Propagation requirement as per BS476 Part 6 to meet the Class ‘O’ Fire category as per 1991 Building Regulations and the Building Standards…Make : Armacell / K- Flex - A-Flex |
| 179 | 18 mm thick Class O Plus Plain sheet Insulation |
| 180 | Acoustic Insulation-Supply, installation testing and commissioning of duct acoustic insulation Inside the Duct with Engineered Nitrile Rubber open cell foam with Density 140 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test or 10,000 fpm air velocity as per ASTM C 1071-05 to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents. Make : Armacell / K Flex / A - Flex |
| 181 | 15 mm Nitrile Insulation |
| 182 | Data and Networking- |
| 183 | Supply, installation, testing & commissioning of 4 pair Cat6A U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568.2-D and ISO/IEC 11801 Class E , Cable should support operating temperature from -20° to +60°C Cable support Conductor Resistance ≤ 8.8 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 80V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 500 MHz , RoHS Compliant, LSZH jacket, shall comply with IEEE 802.3bt (Type 4) for Power Over Ethernet Applications Make: Belden / Legrand / Commscope |
| 184 | Supply, installation, testing & commissioning of Cat6A I/O with Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568.2-D,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3bt (Type 4) standard for POE application with atleast 1000 Plug to Jack mating cycles. The PVC material of Face plate should complie ABS /UL94-V-O certified and should be shuttered. Make: Belden / Legrand / Commscope |
| 185 | I/O Dual |
| 186 | I/O Single |
| 187 | Supply, installation, testing & commissioning of Cat 6A, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6A with Rear Cable Management. Should have easy clip management with labels and clear label covers, Cat6A RJ45 x 24 ports, Shall comply with ANSI/TIA-568.2-D, ISO/IEC 11801 Class EA, IEEE 802.3bt (Type 4) for POE applications, Operating Temperature: -10 °C to +60 °C, Plug Insertion Life, minimum 750 times, Current Rating 1.5A at 20 °C. Make: Belden / Legrand / Commscope |
| 188 | Supply, installation, testing & commissioning of Cat6A UTP 24 AWG Patch Cord Patch cord; UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Belden / Legrand / Commscope |
| 189 | 1mtr Length |
| 190 | 2mtrs Length |
| 191 | Supply, installation, testing & commissioning of 24 Port Layer-2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port, Switching Capacity 56 Gbps, Throughput 41.7 Mpps, Management Port 1 x RJ 45 Console port, PoE power budget 370 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard, MAC Address 16K, Jumbo Frame 12K, Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC. All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty Make: Netgear/Grandstream/Digisol |
| 192 | Supply, installation, testing & commissioning of 48 x 10/100/1000 Mbps Ethernet ports with 4 x 1/10Gig SFP+ ports Layer 3 Switch and module should be from same make for better compatibility and management, 1 x RJ45 port console port, Throughput132 Mpps, Switching Capacity 176 Gbps MAC Address32k, Temperature0°C -50°C , Switch should support DHCP server/relay/client, DHCP snooping/option82, Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON. All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Netgear/ Grandstream/Digisol |
| 193 | SITC OF 4 PORT PoE SWITCH 10/100Mbps PoE port, 2*10/100Mbps Uplink port , 250M Distance, Support IEEE802.3af/at , Whole Power:78W(52V 1.5A) , All port supported by MDI/MDIX auto flip and self negotiation , Supply 4 10/100Mbps adaptive high speed forwarding data packet non-lost port , Support IEEE802.3x flow control for Full-duplex mode and backpressure for Half-duplex mode , Each port max.ower supply reached 15.4/ 30W. Make: Digisol/ Dlink/ TPlink/Alcon |
| 194 | SITC OF 8 PORT PoE SWITCH with 10/100/1000Mbps POE port; 2xGigabit Up- Link ports, Support IEEE802.3af/at, PoE Power:100W or more, All port supported by MDI/MDIX auto flip and self negotiation, adaptive high speed forwarding data packet non-lost port. Support IEEE802.3x flow control for Full-duplex mode and backpressure for Half-duplex mode. Each port max. power supply reached 15.4/ 30W. Make: Netgear/ Grandstream/Digisol |
| 195 | Supply, installation, testing & commissioning of 24 Port Gigabit Fiber Ethernet Access Layer 3 Switch with 16 100/1000Base-XSFP + 8GE Combo(RJ45/SFP)+4 10 Gigabit SFP+ Uplink Ports, Switching Capacity 128Gbps, Throughput 95 Mpps ,CPU ARM7 800M , Packet Buffer Memory 1.5 MB ,MAC Address 16K , ACL Table 1K ,Jumbo frame 10k ,Switch should support IEEE802.3(10Base-T), IEEE802.3u(100Base-TX), IEEE802.3z(1000BASE-X), IEEE802.3ab(1000Base-T), IEEE802.3ae(10GBase), IEEE802.3x, IEEE802.3ak(10GBASE-CX4) ,Switch should support Static Routing, RIPv1/v2, OSPFv2,BGP4,OSPFv3, BGP4+Temperature Working 0°C~50°C, storage -40°C~75°C, Power Supply AC: 100~240VAC, 50~60Hz + 12VDC RPS. All hardware should supplied with the necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Netgear/ Grandstream/ Digisol |
| 196 | Supply, installation, testing & commissioning of 802.11ax WiFi6 Dual Band Access Point with 3.55Gbps aggregate wireless throughput and Dual-band 4x4:4 MU-MIMO with DL/UL OFDMA technology. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Grandstream/ Digisol/ Netgear |
| 197 | Supply and fixing of 1000 Base-LX SFP Transceiver LC Type (20kms) ,Connector type: LC Type, IEEE Standard: IEEE 802.3z, Wavelength (nm): 1310nm , Fiber Type: Single Mode , Max Cable Distance: upto 20Km, Case Operating Temperature: 0º ~70º , Storage Relative Humidity: 5% to 95%. Make: Netgear/HP/Digisol |
| 198 | Supply and laying of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Belden / Legrand / Digisol |
| 199 | Supply and installation of 24 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Belden / Legrand / Digisol |
| 200 | Supply, installation, testing & commissioning of 12 Port Rack mount Draw Type Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,ADAPTER, SM, SIMPLEX SC, PC TYPE ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core and PIGTAIL, SM (OS2), SIMPLEX SC, PC TYPE, 2M, LSZH ,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Belden / Legrand / Digisol |
| 201 | Supply, installation, testing & commissioning of OFC PATCHCORD, SM (OS2), DUPLEX LC-SC, PC TYPE, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db. Make: Belden / Legrand / Digisol |
| 202 | Supply, installation, testing & commissioning of 12U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 3nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Netrack/ Dlink |
| 203 | IP PBX |
| 204 | SITC of IP PBX System support up to 30 users and minimum 30 concurrent calls, integrated 2 PSTN trunk FXO ports through External Gateway, 2 analog telephone FXS ports with lifeline capability and up to 30 SIP trunk accounts, Gigabit network ports with Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive Voice Response), Supports any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs. Make: Grandstream/NEC/Matrix |
| 205 | SITC of IP Based PoE Phone, 2 SIP accounts, 2 line keys, 3-way conferencing, 3 XML programmable context-sensitive soft keys, Dual-switched 10/100 mbps ports, integrated PoE, HD audio on speakerphone and handset. Make: Grandstream/NEC/Matrix |
| 206 | Supply, installation, testing & commissioning of 4 pair Cat6A U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Belden / Legrand / Digisol. Make: Legrand/Molex/Digisol/ Commscope |
| 207 | Audio System |
| 208 | Audio System- Supply, installation, testing & commissioning of Passive Column Loudspeaker with min 12 X 2\\" Driver or better; RMS 120W @ 12 Ohms or better ; Frequency range : 120Hz – 20Khz ; Sensitivity 92 dB and Max SPL 113 dB; Beamwidth @1KHz : 174° x 9° (H X V) or better (Horizontal more is better; vertical less is better), Power Taps (100 V): 40W/20 W/10 W/ 5 W or better (required as per direction of EIC); OEM Mounting Bracket to be Included, Construction : Aluminium, CE Certification or more. Make: Audac/ Bose/ Meyer Sound |
| 209 | Supply, installation, testing & commissioning Dual Channel power amplifier, RMS/AES power handling @ 4 Ω : 2 x 250 W, @ 8 Ohms : 2 x 130 W, @ 8 Ohm Bridge : 1 x 500 W, Frequency response: 20 Hz - 20 kHz, Signal / Noise: > 90 dB, THD+N (@ 1 kHz): < 0.1%, Crosstalk (@ 1 kHz): > 70 dB, Technology: Class-D, Inputs sensitivity: 0 dB (1V RMS), Protection: DC Short circuit; Over heating; Over load; Signal limiting; Convection cooled, should be energy star rated, etc., CE Certification or more. Make: Audac/ Bose/ Meyer Sound |
| 210 | Supply, installation, testing & commissioning of 10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo), 1 Stereo Bus, 1 AUX, “D-PRE” mic preamps with an inverted Darlington circuit, 1-Knob compressors, 24-bit / 192kHz 2in / 2out USB Audio functions, XLR balanced outputs,Works with the iPad, +48V phantom power. Make: Yamaha/ Allen & Heath/ Dynacord |
| 211 | Supply, Installation, Testing & Commissioning of pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better. Table stand with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better. Make: Sennheiser/Shure/ Beyerdynamic |
| 212 | Video & SwitchingSITC of 55\\" 4K UHD(3840 X 2160) resolution Android LED display built in 2.4 GHz WiFi, 1.1 GHz built in Quad core processor, 2 GB DDR3 RAM, 8 GB memory, built in double core Mali 600 MHz GPU, with HDR 10, Dolby Audio, built in WiFi & Cromecast, HDMZI CEC, HDMIARC, built in Bluetooth 4.0. 20 W -Front facing speakers. 3 x HDMI 2.0, 1 x AV, 2 x USB 2.0 Type A, 1 x Headphone out, 1 x SPDIF out. Make: Panasonic/ Samsung/ Sony |
| 213 | Supply Installation Testing & Commissioning of 65\\" 4K Monitor - 65\\" Diagonal, Resolution 3840x2160(16:9), 350 NITS, Operation Hour 16 x 7, HDMI & Control Ports with all required accessories. Make: Samsung/ Panasonic/ LG |
| 214 | Supply, Installation, Testing & Commissioning of 86\\" 4K Multi touch interactive display, 400 cd/m2, built in Mali 470MP3 GPU CA55 Quad Core CPU and Android Pie 13.0 4 GB memory, 32 GB Storage, builtin WiFi & Bluetooth. 2 X 20 W -Front facing speakers, Continuous touch point: 20points: Windows, 10 ponts: Android. Rear port terminals: 4 x HDMI IN, 1 x VGA, 2 x USB 2.0 Type A, 1 x USB 2.0 Type C, 1 x Micro SD, 1 x secure slot( USB 2.0), 1 x OPS slot(15 W), 1 HDMI Out, 1 x RJ45. Front port terminals: 2 x USB 2.0 Type A, 1 x USB Type B for touch, 1 x HDMI 2.0 Input. Make: Panasonic/ Samsung/ Delta |
| 215 | Supply, Installation, Testing & Commissioning of CPU with Intel® Core™ i5-13th Gen, 16 GB RAM, 1TB SSD, along with preloaded Windows OS and MS Office with mouse and keyboard. HDMI, USB 3.0 Ports. Mini cabinet. Make: HP/ Dell/ Lenovo |
| 216 | Supply, Installation, Testing & Commissioning of Voice Tracking Camera supporting 4K @ 60fps, min 12X Optical Zoom with Field of View of PTZ Camera should be min 81 Degree. The Camera should track voice upto min 8 meters. The Camera should support the Automatic Auto Framing Mode when two individuals speak simulatneusly. The Panning range of camera should be min +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees. Camera should support simultaneous outputs through HDMI, USB 3.0 and IP and can be controlled via RS232/IP. Camera should support multiple video streams. The Camera should support PoE+ and Virtual USB Driver. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. 3-Year Warranty. Make: Lumens/ Sony/ Vaddio |
| 217 | Supply, Installation, Testing & Commissioning of wall mount PTZ camera stand. |
| 218 | Supply, installation, testing and commissioning of 4K60 4:4:4 AV switcher. Provides four HDMI® inputs and one HDMI output. Includes support of HDR (High Dynamic Range) and Dolby Vision® video formats, automatic switching of HDMI inputs, advanced EDID management, native Crestron® control via Ethernet, XiO Cloud® connectivity, and enterprise-grade security. Make: Crestron/ LibertyAV/ Extron |
| 219 | Supply, installation, testing and commissioning of a Transmitter with 1x HDMI input and 1x RJ-45 output which should support a resolution up to 4K60 4:4:4 video, It should support the HDCP up to 2.3, For UHD and 4K signals, TX . should be able to pass HDCP 2.2, EDID, & CEC. Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio. A cable length up to 130 ft (40 m) for UHD and 4K. Make: Crestron/ LibertyAV/ Extron |
| 220 | Supply, installation, testing and commissioning of a Receiver with 1x RJ-45 input and 1x HDMI output which should support a resolution up to 4K60 4:4:4 video, It should support the HDCP up to 2.3, For UHD and 4K signals,RX.Should be able to pass HDCP 2.2, EDID, & CEC. Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio. A cable length up to 130 ft (40 m) for UHD and 4K. Make: Crestron/ LibertyAV/ Extron |
| 221 | Supply, Installation, Testing & Commissioning of HDMI to USB Capture device with Full HD (1080p60) resolution through your system’s USB 3.0 port with an optional HDMI loop out that supports resolutions up to 4K @60Hz. an optional HDMI loop-out that supports resolutions up to 4K @60Hz. Make: Crestron/ LibertyAV/ Cypress |
| 222 | Supply, Installation, Testing & Commissioning of 8 Port Gigabit PoE+ Network switch - Fully Managed, 8x1G PoE+ ports, 2xSFP+ with 220W power budget. Pre-configured for Out-of-Box L2 Multicast (SDVoE-ready). Non-Blocking architacture. SNMP, RMON, MIB, LLDP, AAA, sFlow, RSPAN and PTPv2 1-step transparent clock implementation. Make: Netgear/Digisol/Cisco |
| 223 | Supply, Installation, Testing & Commissioning of SFP+ 10GBASE-LR singlemode 9/125µm LC-Duplex Optical Transceiver Module. Make: Netgear/Digisol/Cisco |
| 224 | Cables, Connectors and Other Accessories |
| 225 | Supply , Installation , Testing & Commissioning of 5 mtr HDMI High-performance Cables With Molded HDMI Connectors At Both Ends. HDMI Standard Supports High-definition Video Plus Multi-channel Audio in a single cable. Make: Crestron/ LibertyAV/ Falcon |
| 226 | Supply and laying of High-conductivity copper speaker Cable, 2.5 SQ mm stranded tinned copper conductor, PVC insulation, twisted Pair, PVC jacket. Make: Krystals/ LibertyAV/ Belden |
| 227 | Supply and laying of Microphone cable, 20AWG 2 core PVC insulated Cu conduction sheilded microphone cable. Make: Krystals/ LibertyAV/ Belden |
| 228 | Supply & Laying of Cat6A Cable 23AWG U/FTP Cable. Make: Legrand/ Molex/ Digisol/Commscope |
| 229 | Supply, Installation, testing & commissioning of Cat6A Patch cords, 1m. Make: Legrand/ Molex/ Digisol/Commscope |
| 230 | Supply, Installation, testing & commissioning of Conncetors: XLR, TRS Stereo, RJ45, RCA, Mono. Make: Neutrik/ MX/ Digisol |
| 231 | Supply, Installation, testing & Commissioning of Equipment rack, 9U or above Closed Equipment Rack with PDU, Shelf, D Nuts, Cooling Fans, Castor Wheels. Make: Valrack/ Dlink/ Netrack |
| 232 | BIOMETRIC |
| 233 | SITC of 4.3 inch Operation method Capacitive touch screen Video Lens 2 Resolution 2 MP (video stream: 720P)FOV HFOV = 41.5°; VFOV = 75.5°; DFOV = 87° Audio Audio quality Noise suppression and echo cancellation Network Wired network Support InterfaceNetwork interface 1 RJ-45, 10/100 M self-adaptive Lock control 1 Exit button 1 Door contact input 1 TAMPER 1 RS-485 1,RS-485 (Half duplex,HIKVISION）iegand 1,Wiegand （Hik 26bit,Hik 34bit USB 1 Authentication Card type M1 card General Built-in access controller Support Power supply 12 VDC to 24 VDC, 2 A Power consumption ≤ 10 W Working temperature -30 °C to 60 °C (-22 °F to 140 °F) Protective level IP65. Make-Hikvision/essl/Yale |
| 234 | SITC of Exit button designed for hollow doorframe doors with an embedded electric box. This exit button has NO, NC, and COM output contacts for access control. It is housed in a sandblasted aluminum panel. Make-Hikvision/essl/Yale |
| 235 | SITC of Signal door magnatic of Green: Working StatusPower supply 12 VDC, 340 mA × 2 Working temperature -10 °C to 55 °C (14 °F to 131 °F) Working humidity 0 to 95 % (relative humidity) Dimensions Lock Body: 238 mm × 45 mm × 25 mm (9.4\\" × 1.8\\\" × 1.0\\\") Armature Plate: 182 mm × 38 mm × 12.5 mm (7.2 × 1.5\\\" × 0.5\\\")\\" Weight 2.1 kg (4.6 lb)Material Shell: hard Anodizing Electroplating Operated Lock Body: eco-friendly Nickel Electroplating Operated Armature Plate: eco-friendly Zinc Electroplating Operated Thrust Max. 280 kg (617 lb) Door type Single leaf, double leaf, wooden door, glass door, metal door, fireproof door. Make-Hikvision/essl/Yale |
| 236 | SITC of Mounting lockL-bracket Dimension (L × W × H): 238 mm × 30 mm × 47 mm (9.4\\" × 1.2\\\" × 1.9\\\"); Z-bracket Dimension (L × W × H): 185 mm × 44 mm × 100 mm (7.3 × 1.7\\\" × 3.9\\\")\\" Weight 0.77 kg (1.7 lb)Material Shell: hard anodizing electroplated Door type Wooden Door, and Metal Door. Make-Hikvision/essl/Yale |
| 237 | SITC of Mifare Card for access pourpose. |
| 238 | SITC of VMS Softwer for Video management Surveillance. Make-Hikvision/essl/Yale |
| 239 | Supply, installation, testing & commissioning of 4 pair Cat6A U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Belden / Legrand / Digisol/ Commscope |
| 240 | CCTV Serveillance System |
| 241 | Supply,Installation,Testing & Commissioning of 4MP Dome IR Network Camera (1/2.8\\"CMOS sensor, Mini. Pixel of 2688*1520 or higher video quality, frame rate of Up to 25fps, S+ 265, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance , WDR , 3D-DNR for noise reduction, BLC, ICR, Alam in and Out. IPv4 network supported, IP66, rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af ( FCC, CE, BIS certified.) with accessories as require. Make: Alcon/ Hikvision/ Prama |
| 242 | Supply,Installation,Testing & Commissioning of 5MP Motorised Verifocal Bullet IR Network Camera 1/2.8\\" CMOS sensor, Mini. Pixel of 2592*1944 or higher video quality, frame rate of Up to 20fps, s+ 265, H.265, H.264 & MJPEg video compression, 2.7-13.5mm Fixed lens, physical ICR filter of both day and night, 80mtr IR Distance, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and Out. IPv4/IPv6 network supported, IP67, rated for weatherproofing, ONVIF ver 2.2 or higher, PoE IEEE 802. 3af ( FCC, CE, BIS certified.) with accessories as require. Make: Alcon/ Hikvision/ Prama |
| 243 | Supply,Installation,Testing & Commissioning of 2MP IP PTZ Network Camera 1/2.8\\" CMOS, ICR, PAL: 25fps (1920×1080, 1280×960, 1280×720, 704×576, 704×480, 640×480) NTSC: 30fps (1920×1080, 1280×960, 1280×720, 704×576, 704×480, 640×480) Sub Stream PAL: 25fps (704×576, 704×288, 640×360, 352×288) NTSC: 30fps (704×480, 704×240, Video Compression S+265/H.265/H.264/M-JPEG Triple streams, DC12V, Micro SD card slot up to 512gb, -30-65 °C, IP67, 25x optical zoom(5.2~ 125mm),Digital zoom 16x , IR range: up to 150m, (UL, FCC, CE, BIS certified). Make: Alcon/ Hikvision/ Prama |
| 244 | SITC of 63-Ch NVR with Video input 63 ch, Max Resolution 12 MP , Bandwidth Incoming 400Mbps; Outgoing 400Mbps Recording Resolution 12MP/8MP/6MP/ 5MP/4MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF , Preview Capability 3×12MP, 4×8MP, 4×6MP, 5×5MP, 8×4MP, 9×3MP, 16×1080P, 32×720P, 40×4CIF ,8 SATA interfaces for 4 HDDs, Up to 10TB for each HDD ,2xRJ45 self-adaptive 10/100/1000 Mbps network interfaces. Make: Alcon/ Hikvision/ Prama |
| 245 | SITC of Wireless P-to-P system with 802.11a/n/ac, flash 8MB, DDR3L 64MB, 2.4G FREEQUENCY 5.150GHz –5.850GHz. Make: WIS Net/ TP Link/ DAHUA |
| 246 | SITC OF 8 TB Surveillance HDD for 30 days recording with FHD resolution. Make: Seagate/ WD/ Consistent |
| 247 | SITC of 55\\" 4K UHD(3840 X 2160) resolution Android LED display built in 2.4 GHz WiFi, 1.1 GHz built in Quad core processor, 2 GB DDR3 RAM, 8 GB memory, built in double core Mali 600 MHz GPU, with HDR 10, Dolby Audio, built in WiFi & Cromecast, HDMZI CEC, HDMIARC, built in Bluetooth 4.0. 20 W -Front facing speakers. 3 x HDMI 2.0, 1 x AV, 2 x USB 2.0 Type A, 1 x Headphone out, 1 x SPDIF out. Make: Panasonic/ Samsung/ Sony |
| 248 | SITC of HDMI 2.0 cable, 5m. Make: Falcon/ LibertyAV/ Honeywell |
| 249 | Supply, installation, testing & commissioning of Cat6A UTP 24 AWG Patch Cord, 2m. Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Legrand/ Molex/ Digisol |
| 250 | SITC of 6\\" X 6\\" PVC box. |
| 251 | Supply, installation, testing & commissioning of 4 pair Cat6A U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant.. Make: Legrand/Molex/Digisol/Commscope |
| 252 | SITC of Cat6 Outdoor Double Jacket, 4 Pair, 23AWG with necessary accessories. Make: Legrand/Molex/Digisol/Commscope |
| 253 | FIRE FIGHTING(PIPE& SPRINKLER) |
| 254 | Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.Make- JINDAL/ TATA/ SAIL |
| 255 | 32 mm dia (Heavy Class) as per IS-1239 Part-I/2004 |
| 256 | 25 mm dia (Heavy Class) as per IS-1239 Part-I/2004 |
| 257 | Supply, Installation, Testing & Commissioning of Pendent / Upright type standard Sprinkler with quartzoid bulb of 68 / 79 deg. C temperature rating and 1/2\\" end connection confirming to IS:15105 with ISI mark for all floors etc. All complete as per direction of EIC.Make : TYCO / Viking / HD |
| 258 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of Stainless steel complete with 15NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Brust) with branch line (inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes as required:Make : NEWAGE / MINIMAX /SIPERREX |
| 259 | 1000 mm Length |
| 260 | Fire Alarm |
| 261 | Supply, Installation, Testing & Commissioning of addressable fire control module all complete as per specification & direction of EIC.(Make: RAVEL/Honeywell/Eaton) |
| 262 | Supplying installation testing and commissioning of Addressable Photoelectric type Smoke-Cum-Heat Detector (Multi Type), complete with base, isolator and all accessories for above / below false ceiling as per direction of Engineer-in-charge. Make-Morley IAS/Edward/Hochiki/Siemens/Eq. |
| 263 | Visual type Response indicators with LED indicating lamp, housed in suitable MS enclosure with acrylic cover fixed in flush with wall to operate in conjunction with smoke/Heat detectors.Make-Morley IAS/Edward/Hochiki/Siemens/Eq. |
| 264 | Supplying installation testing and commissioning of Audio Visual Strobe, complete with mounting box and accessories and module if require as per direction of Engineer-incharge. Make: Morley IAS/Edward/Hochiki/Siemens/Eq. |
| 265 | Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCP listed. Make: Morley IAS/Edward/Hochiki/Siemens/Eq. |
| 266 | Supplying installation testing and commissioning of Addressable Manual Call Point(MCP), complete with addressable mini input module, back box and accessories as per direction of Engineer-in-charge. Make: Morley IAS/Edward/Hochiki/Siemens/Eq. |
| 267 | Supplying installation testing and commissioning of Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete with all accessories as per direction of Engineer-in-charge. |
| 268 | Fire Exinguishers-Supplying installation testing and commissioning of ABC type fire extinguishers of 6 kg capacity confirming to IS:14609 including cost of all material & labour for all floors & service building etc. all complete. Make-MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/SAIEX or equivalent |
| 269 | Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made from ISI marked seamless cylinder confirming to IS: 7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket for all floors & service building etc. as per direction of Engineer-in-charge.Make-MINIMAX/CEASEFIRE/SAFEX/SAFEFIRE/OMEX or equivalent |
| 270 | Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part II and a polyurethane coated CO2 Gas Cartridge, ISI marked, IS: 4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge. |
| 271 | PANEL FIRE SUPPRESSION SYSTEM-Supply, fixing, testing and commissioning of Automatic linear pneumatic Tube Detection based Clean Agent System for Electrical Panels ( Fire De Tec Tube Panel Protection System), consisting of the following components. Make: Supremex/ Fire Trex/ Sevo |
| 272 | 2 KG Clean Agent system complete with FK-5-1-12 / NOVEC1230( UL Listed )gas & all necessary fitting, support ,and accessories,connected with DLP valve & End of Line Adaptor. |
| 273 | Pressure Switch (UL Listed) |
| 274 | Flexible Polymer Detection Tube with all necessary fittings & supports (UL Listed). |
| 275 | PA SYSTEM :-Supplying, installation, testing & commissioning of 6W metal box Ceiling / wall-mounted speakers complete as required.(Make: Henrich/Bosch/Ravel/Eq.) |
| 276 | Supply,installation,testing and commissioning of 2core x 1.5sq.mm FRLS cable with its required accessories like saddle,screw,grip etc fixed on the surface of the building structure.Make- POLYCAB/KEI/ RR KABLE/Finolex/Bolton |
| 277 | N.B - (i) The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed. (ii) Sample of materials/ shall be approved before procurement and use. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
