|
| 1 | SUB WORK NO 1-Well repair |
| 2 | Item No3- Providing and casting in situ R.C.C.M-300 of trap/granite/quartizite/geniss metal for approved quality for R.C.C. work as per detailed drawing and designs or as directed by Engineer in charge including normal dewatering formwork compaction finishing the formed surface with C.M. 1:3 of sufficient thickness if special finish is to be provided and curing etc. R.C.C. Beam l M-30 MJP DSR 2018-19 |
| 3 | R.C.C.Vertical Wall M-30 MJP DSR 2018-19 |
| 4 | Item No: 4- Providing and fixing in Position Tor / Mild steel bar reinforcement of various diameter for R.C.C. piles caps footings foundation slabs beams coloumns canopies stairacases newels chajjas lintels paradis coping fins arches etc.as per detailed drawing and schedules including cutting bending hooking the bars binding with wires or tack welding and suporting as required etc. ( including cost of binding wires ) |
| 5 | SUB WORK NO 2-Pumpig machinary |
| 6 | Item No. 1 :- Submersible Pumpset Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable fopr various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V+/- 10%, Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraullc thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer'sdesign.Antithrust stream lined non return valve shall be provided with the pump 3 m. Submersible copper conductor cable, in single/double run and 2 pair of erection clamp 65 mm width 10 mm thick shall be provided with each pump. 5.00HP Submercible Pump |
| 7 | Item No. 2 :-Sluice Valve Sluice valve of PN 1 rating with rising spindle generally conforming to IS 780 for sizes 50 mm to 300 mm dia and IS 2906 for various sizes and above with concrete supports. 65 mm dia on delivery |
| 8 | Item No. 3 :-Reflux valves Reflux valve of PN 1 rating generally conforming to IS - 5312 with renewable gun metal sealing face on swing door with concrete supports (DSR,MJP for Electrical & Mechanical works, P-15) 65 mm dia on delivery |
| 9 | Item No. 4 :- Pressure Gauge Providing Errecting 100 mm dia diaphram type specially designed for swage pumping Pressure Gauge of various capacities |
| 10 | Item No. 5A :- GI Pipe B class 65 mm Providing ISI mark GI Pipe of following class and dia including all local and central taxes, octroi, inspection charges transportation to stores etc. complete (IS- 1239-2004) |
| 11 | Item No. 5B :- GI Bend B class 65 mm Providing ISI mark GI Bend of following class and dia including all local and central taxes, octroi, inspection charges transportation to stores etc. complete (IS- 1239-2004) |
| 12 | Item No. 6 :- MS Pipes and Specials Designing Providing, Fabricating M. S. Special cable Tray supports, Drain pipes for D.G. Set, Pipe work& items related to all other similer work incuiding cutting bending & Painting , as per detailed specification. |
| 13 | Item No. 7 :- L.T. Control Panel Board Designing, Providing , Errecting, Testing & Commissioning with Satsfactory Test & Trial of Various Panel Boards as per detailed specifications. 1) GI sheet fabricated box for panel board 16guage |
| 14 | 2) Self Locking arrangement |
| 15 | 3) Marine water proof plywood |
| 16 | 4) ELCB 63Amp as per BIS 4293-1983 |
| 17 | 5) Volt Meter |
| 18 | 6) Ammiter |
| 19 | 7) Capacitor polypropylene condenser (HP x 1.5) |
| 20 | 8) Pilot Lamp Set |
| 21 | 9) Fully automatic FASD starter |
| 22 | 10) Triple pole clad / metal clad switch |
| 23 | 11) Iton meatclad change over switch |
| 24 | 12) Earthing GI Plate 0.6 x 0.6 x 0.6, charcoal |
| 25 | Item No. 8 :-Cables Submersible cable 3core 4.00 Sq. mm |
| 26 | SUB WORK NO 3 -Raising Main |
| 27 | Item No: 1- Excavation for foundation /Pipe trenches in Hard Murum including removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc. In Soil MJP DSR 2021-22 |
| 28 | In Hard Murum MJP DSR 2021-22 |
| 29 | In HMB MJP DSR 2021-22 |
| 30 | In SOFT ROCK MJP DSR 2021-22 |
| 31 | Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testing etc. 90 mm dia HDPE Pipes 8 MJP DSR 2021-22 |
| 32 | 80 mm dia GI Pipes MJP DSR 2021-22 |
| 33 | Item No: 3- Lowering laying and jointing P.V.C.Pipes / G.I. Pipes of medium class including conveyance from stores to site all labour giving satisfactory hydraulice test etc. 90 mm dia HDPE Pipes 8 MJP DSR 2021-22 |
| 34 | 80 mm dia GI Pipes MJP DSR 2021-22 |
| 35 | Item No: 5- Providing and fixing ISI Mark Air Valves Sluice Valves Non Return Valves as below of following diameter including all taxes ( central & local) railway freight inspection charges unloading and loading etc. 15mm Dia Air Valve MJP DSR 2021-22 P/I-15 + 10% |
| 36 | 80 mm Dia Sluice Valve MJP DSR 2021-22 P/I-15 + 10% |
| 37 | 80 mm Dia Non return Valve MJP DSR 2021-22 P/I-15 + 10% |
| 38 | Item No: 6- Providing and constructing B.B. masonryB.B. masonry valve chamber 60x45, Depth 0.9M with cover valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc.complete as directed by Engineer-in-charge. MJP DSR 2021-22 P/I-15 + 10% |
| 39 | Item No: 7- Hydraulic testing of GI/PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressuregauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 90 mm dia HDPE Pipes 8 MJP DSR 2021-22 |
| 40 | 80 mm dia GI Pipes MJP DSR 2021-22 |
| 41 | Item No: 8- Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc. MJP DSR 2021-22 P/I-15 + 10% |
| 42 | SUB WORK NO 4 -GSR |
| 43 | Item No: 1- Desigining ( aesthetically ) and constructing R.C.C. Ground Service Reservoir in. M-300 mix of required capacity including excavation in all types of strata foundation concrete container walls bottom slab top R.C.C. roof slab/ordome 20 mm thick cement plaster with water proofing compound in C.M. 1:3 proportion to inside face of the all container including epoxy paint from inside including refilling and disposing of surplus staff within lead of 50 m all labour and materials charges for laying and jointing of pipe assembly for inlet outlet washout overflow and bye pass arragement consisting of C.I./M.I. pipes special and valves of given diameters providing and fixing accessories such as M.S.laster and outside C.I. manhole cover and frame wake top slab B.B.Masonary chamber for all valves ventiliating shafts. including giving satifactory hydraulic test and water lightness test as per I.S. code and providing three coat of cement paint to all expose surfaces of structural including roof surface etc. ( Capacity.36000 Liters ) . |
| 44 | Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testing etc. 80 mm dia G.I. Pipes MJP DSR 2021-22 |
| 45 | Item No: 3- Excavation for foundation /Pipe trenches in earth soil of all types sand gravel and soft Murum / Hard Murum / Hard Murum & bouers /Soft Rock / Hard Rock by blasting including removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc. A- Soil |
| 46 | Item No: 4 - Providing and laying insitu cement concrete of grade ( M-100 ) 1:4:8 of trap/ granite /quartizite/geniss metal for foundation and bedding including dewatering formwork compacting and curing etc. |
| 47 | Item No: 5 Providing UCR maso in founadation and Plinth in C M 1:6 stricking the joints on unexposed faces racking out joints on exposed facesincluding watring and curing etc. |
| 48 | Item No: 6- Providing Flush and grooved pointing to UCR /BB maso in C M 1:3 stricking waterng and curing etc. |
| 49 | SUB WORK NO 5-Distribution |
| 50 | Item No: 1- Excavation for foundation /Pipe trenches in Hard Murum including removing the excavated materials upto a distance of 50 M and lift 1.50 m stacking and spreading as directed by Engineer in charge normal dewatering shoring and strutting preparing the bed for the foundation and excluding back filling etc. In Soil MJP DSR 2021-22 |
| 51 | In Hard Murum MJP DSR 2021-22 |
| 52 | In HMB MJP DSR 2021-22 |
| 53 | Item No: 2- Providing & Supplying medium class G.I.Pipes of following dia & class including all local & cental taxes octroi inspection trasporation to stores & all cost of jointing materials of labour & giving satisfactory hydraulice testing etc. 75 mm dia HDPE Pipes 6KG MJP DSR 2021-22 |
| 54 | 63 mm dia HDPE Pipes 6KG MJP DSR 2021-22 |
| 55 | 50 mm dia GI Pipes MJP DSR 2021-22 |
| 56 | Item No: 3- Lowering laying and jointing P.V.C.Pipes / G.I. Pipes of medium class including conveyance from stores to site all labour giving satisfactory hydraulice test etc. 75 mm dia HDPE Pipes 6KG MJP DSR 2021-22 |
| 57 | 63 mm dia HDPE Pipes 6KG MJP DSR 2021-22 |
| 58 | 50 mm dia GI Pipes MJP DSR 2021-22 |
| 59 | Item No: 5- Providing and fixing ISI Mark Air Valves Sluice Valves Non Return Valves as below of following diameter including all taxes ( central & local) railway freight inspection charges unloading and loading etc. 50mm Dia Sluice Valve MJP DSR 2021-22 P/I-15 + 10% |
| 60 | Item No: 6- Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc.complete as directed by Engineer-in-charge. B.B.masonry valve chamber 60x45, Depth 0.9M with cover MJP DSR 2021-22 P/I-15 + 10% |
| 61 | Item No: 7- Hydraulic testing of GI/PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressuregauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia HDPE Pipes 6KG MJP DSR 2021-22 |
| 62 | 63 mm dia HDPE Pipes 6KG MJP DSR 2021-22 |
| 63 | 50 mm dia GI Pipes MJP DSR 2021-22 |
| 64 | Item No: 8- Refilling the trenches with available excavated stuff with soft materials first over pipeline and then hard materials in 15 cm laters with all leads and lifts including consolidation surcharging etc. MJP DSR 2021-22 P/I-15 + 10% |
| 65 | SUB WORK NO 6- Miscellaneous Works |
| 66 | Item no :- 1 Commissioning,runningand maintaining the scheme to quantities,ratedcaoacity,including manning necessary personal such as oprater, valveman ,etc. as per requirement of the scheme and who should also administerchemical dose for a period of 3 months ,together with training of personalspaerd by local body as directed by Engineer-in-charge. (MJP DSR 2021-22, P.No. |
| 67 | Item no :- 2 Providing & Fixing Information Board as per type design including necessary excavation for fixing M.S. angle post in all types of strata ,P.C.C.blocks in grade (1:2:4), angle post two section 50 x 50 x 6 mm of 2.75 M each, steel plate of 16 gauge & size 1.5 x1.2 meter supported by M.S. plate of size 25 x 6 mm of length 1.50 meter each @ top and bottom painting the angles and board by oil paint in two coats, writing letters on one coat of approved shade etc. completed (PWD DSR 2021-22, P.No.255, I.No.1(a) ) Please Enable Macros to View BoQ information |
