|
| 1 | BEAUTIFICATION OF VISHWA SANTI BUDDHA VIHAR BY PROVIDING AND INSTALLATION OF FACADING LIGHTING SYSTEM FOR MUNICIPAL COUNCIL UDGIR |
| 2 | Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 3 | Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 4 | Supplying and installing cat-6 LSZH cable suitable for networking as per specification no. WG-COC/NC |
| 5 | Supplying and installing cat-6 armoured cable with ECCS tape suitable fornetworking as per specification No. WG-COC/NC |
| 6 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 12kW, TPN MCB 63A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 7 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 8 | Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board. |
| 9 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 10 | Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/ 4 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 |
| 11 | Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. |
| 12 | Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD |
| 13 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 14 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 15 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 16 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 17 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 18 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 19 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete |
| 20 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 21 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP |
| 22 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). |
| 23 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 24 | Supplying & erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 25 | INVITING E-QUOTATIONS FOR BEAUTIFICATION OF VISHWASHANTI BUDDHA VIHAR BY PROVIDING AND INSTALLATION OF FACADE LIGHTING SYSTEM FOR MUNICIPAL COUNCIL UDGIR |
| 26 | Supplying, installation and testing of Cast Iron Bollards with 10 to 15 W LED Lamp. Used for Lighting plays a crucial role in enhancing the aesthetics and functionality of any outdoor space. Among the many options available, outdoor bollard lights have gained popularity for their versatility and ability to create a visually-appealing ambiance. These light fixtures not only provide illumination but also serve as decorative elements that add character and charm to pathways, gardens, and other exterior areas. Technical specification- IP- 54, Material : Alu. Casting, Color -Finish Grey, 15w in-built LED, 3000 K |
| 27 | Supply, Installation of Dust tight and protected against complete. junction box is an electrical enclosure that Outdoor more wiring connections. The box protects the connections, which usually contain vulnerable points such as wire splices, from environmental conditions and accidental contact. FRP Junction Box range has an IP rating of 66/67 making it the ideal choice for the types of environments described previously |
| 28 | Supply of 120W DMX Energy saving, environment friendly, long life, exclusive innovative designed RGB/ RGBW projector light with highly efficient LEDs, High Power color changing Projector light for lighting with DMX logarithmic & advanced optical technology. High strength Aluminium die casted fixture with anti-aging, anti-corrosion powder coating. Toughened glass cover with High Impact Resistance strength. The multiple options in lens meets the demands of various lighting designs and maximizes the utilization of light. High performance LEDs offer rich, saturated glare free light at significantly less cost for installation, operation, and maintenance than traditional light sources. Uniquely designed fixture with angle adjustment for illuminating desired area. with High level waterproof IP 67/68 and VDE/UL approved nylon connector molded with cable is used for carrying DMX signal from DMX Controller to fixture or from one fixture to another fixture without DMX signal loss & noise generation. Built-In Potted IP67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 4kV & other safety test as per IS 15885 Part-2/ Sec 13, IEC60598-1.IP66, IK07,Lumen outpout - 4500lumens /5500 lumen, THD < 10%,pf >0.95, Equivalent to Havells make Ranger 120W DMX |
| 29 | Supply of exterior rated Architectural LED RGBW Linear LED Wall Washer luminaire 80W DMX ; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness and diecasted end caps, Total System wattage not exceeding 24Vwith system lumen output should be more than 4000 lmwith all LEDs on. Luminaire shall be capable of producingdynamic color changing light with 16 million colors as thelight fixture should be programmable using 8 bit controlDMX512 protocol / Ethernet based control. Luminaireshould be complete with dedicated Lens made up ofUL/VDE approved PC for each LED, offering beam angleof different types such as narrow, medium, wide or ellipticalas per the site requirement. Fixture should have Height 81mm ± 5% including surface mount base width 42.8 mm ±5% , length 1000 mm ± 5% with constant locking hinges forsimple position control from various angles without specialtools. DMX enabler circuit should be inside the Luminaireonly. Luminaire shall be provided with a BIS ApprovedPotted Driver of IP 66/67 rating made of extrudedaluminium to make it more thermal efficient, Led Drivershould have Operating input voltage range: 90-305Vac, PF> 0.95 and must have safety operation range form 100V -270Vac. Led driver must have SELV output and Casetemperature i.e. Tc > 90°C. Fixture shall be suitable tooperate at an ambient temperature range of -10°C to 50°Cand complete luminaire shall be IP66 and IK07 rated. LEDLife time shall be at least L70B50 @ 100000 burninghours. LED should be with ceramic package of makeNichea, Osram, Cree, Lumiled only. DMX enabler circuitshould be inside the Luminaire only. The product should beBIS approved with R number mentioned on product label.To be supported with Product test reports - LM79, BISReport and LEDs Test Reports. Luminaire shall beconforming to BIS i.e. IS 10322 (Part5/Sec 5). Potted IP67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over VoltageProtection ,Surge Voltage Protection upto 10kV with SPD &other safety test as per IS 15885 Part-2/ Sec 13, IEC60598 1. Equivalent to Havells make Colorline 80W DMX |
| 30 | Supply of exterior rated Architectural LED RGBW Linear LED Flex Wall Washer luminaire 80W DMX ; suitable for facade lighting with extruded aluminium housing, powder- coated finish, Clear toughened glass of 4mm thickness and die casted end caps, Total System wattage not exceeding 24V with system lumen output should be more than 4000 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol / Ethernet based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PC for each LED, offering beam angle of different types such as narrow, medium, wide or elliptical as per the site requirement. Fixture should have Height 81 mm ± 5% including surface mount base width 42.8 mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. Luminaire shall be provided with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90- 305Vac, PF > 0.95 and must have safety operation range form 100V - 270Vac. Led driver must have SELV output and Case temperature i.e. Tc > 90°C. Fixture shall be suitable to operate at an ambient temperature range of - 10°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 100000 burning hours. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. DMX enabler circuit should be inside the Luminaire only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports- LM79, BIS Report and LEDs Test Reports. Luminaireshall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5). Potted IP67 electronic LED driver with APFC, lower THD, Open Circuit Protection, Over Voltage Protection ,Surge Voltage Protection upto 10kV with SPD & other safety test as per IS 15885 Part-2/ Sec 13, IEC60598 1. Equivalent to Havells make Colorline 80W DMX |
| 31 | Supply,InstaIIation,Testing & Commissioning of 24W DMX Stylish & Modern Linear monochromatic /RGB wall grazer LED luminaire with multi angle lens option to illuminate & ornate the lighting design application. Features & Benefits Configurable white or monochromatic RGB Lighting effects with gorgeous colour purity and dynamic change Digitally design based on DMX 512 protocol to obtain the desired colour combination out of 16 Million colours Long life & photobiologically safe LEDs High performance electronic driver ensures zero maintenance No harmful UV & IR radiations Environment friendly as it does not contain Mercury Instant light with low running temperatures Operating temperature: -30 C to +50 C Average life L70B50: 70000 hours. DMX decoder device is In-Built with in fixture with IP66 protection. Housing & Finish High strength Extruded Aluminium fixture with anti- aging, anti-corrosion electrostatic powder coating with aesthetically designed heat sink for efficient thermal management. Metal gland is used for power & data signal cable entry and provision for loop in-loop out. Available in Window Grey - RAL 7040 Body Colour. Light Source High efficiency long life LED module with SMD LED package mounted on MCPCB. Lens & Cover PC Lens with symmetric & elliptical distribution. Toughened glass cover with High Impact Resistance strength. (For detailed photometric data, please refer LM79 report & IES file). Electronic driver Built-In Potted IP67 electronic LED driver with APFC, lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection up to 4kV & other safety test as per IS 15885 Part-2/ Sec 13, IEC605981. Signal Transmission Cable High level waterproof IP67/68 and VDE/UL approved nylon connector moulded with cable is used for carrying DMX signal from DMX Controller to fixture or from one fixture to another fixture without DMX signal loss & noise generation. Mounting The |
| 32 | Supply of DMX Controller for the system including all other accessories required for the running of the system Controller should have Input Power 5-5.5V DC 0.6A and Output Protocol DMX512 with 4 universe, 2 universe should work in Stand Alone Mode and 2 universe should work in live mode with laptop/ tablet / computer. The universe should be expandable from 2 to 4 DMX512 universes. It should be compatible for Programmability with PC, Mac, Tablet, Smartphone by using USB & Ethernet .Dmx controller should have network controllability feature to control the scene remotely through LAN and triggered via UDP packets on port 2430. Its must have Connections Type C USB, XLR3, Ethernet, battery. There should be provision for Memory microSD card. Device should have Intuitive backlit keyboard with 10 presets and also have provision of kepad on device for changing scene manually from device. Device should be capable to work on Extended triggering possibilities (TCA) & also have Smart Upgrade Technology (SUT). It is an IP 20 unit and has an Operating Temperature of 0°C to 50°C. weight should not be more than 120g. OS Requirements for the controller is Mac OS X 10.8-10.12, Windows 7/8/10. Standards should be EC, EMC, ROHS. The controller should have a variety of features including 2048 DMX channels, clock/calendar, iPhone/iPad/Android remote control, Ethernet facilities, dry contact port triggering and multi-zone SD card memory. Network synchronization of one area across hundreds of universes with the possibility of 99 scenes across 5 areas with auto clock triggering for sunrise and sunset and as per the festivals for specific occasions. Device should be equipped with meta; clamp to mount on wall. All Dynamic LED lighting fixtures & controllers shall be of same make to avoid integration, synchronization, and maintenance issues in future. To be provided with IP 66 enclosure if installed in external environment. |
| 33 | Supply of DMX Splitter with Input Voltage range : 190- 240V AC, Power Consumption 5W max. Housing is made of CRCA with powder coated finish Mounting, 19 inch rack mountable, Operation Temperature -30°C to +55°C, 8 Output with 3pin XLR terminal sockets, Ingress Protection Rating IP20. This unit takes the DMX Signal from DMX Controller & split the signal into 8 separate output channels. The output terminals of Splitters are optically isolated from the input. Splitters should be capable to amplify the DMX signal & allowing the data link to be extended by max. 300 m (1044 ft.) using AWG 22 DMX cable or 150 m (500 ft.) using AWG 24 DMX cable or maximum 20-25 fixture per output channel. To be provided with IP enclosure if installed in external environment. |
| 34 | Supply of Instruction forwarder which dedicated to amplify, forward and insulate the signal that comes from the DMX controller When it is connected to the bus of DMX512. long distance transmission, realize extending the signal transmission distance, Water proof IP65, compatible with various kinds of power range fixture. Seclusion type, total isolation withstand voltage>500v, suitable for long distance transfer or stronginterference environment.External Constant voltage 24V Power supply required to operate the device, DMX Signal is protected from Surge upto 4KV. |
| 35 | Programming Charges for DMX512 is a standard for digital communication networks that are commonly used to control lighting and effects. It was originally intended as a standardized method for controlling stage lighting dimmers, which, prior to DMX512, had employed various incompatible proprietary protocols. DMX lighting is a type of digital lighting control. DMX stands for Digital Multiplex and is a system that allows multiple fixtures to be affected by a single controller. DMX lighting uses a data signal to precisely control the intensity, colour, and other parameters of LED lights. Control multiple LED lights at once. DMX controllers/decoders are great for theater lighting, stage lighting, church lighting, and other applications that require synced lighting systems. |
| 36 | Supply DMX XLR Cable. XLR cables are what's most often used for analog functions such as microphones and interconnects. Analog has a much lower impedance requirement so cables don't have to be rated, but usually the impedance is around 45 ohms. DMX cables are what we use for lighting. XLR cables are what's most often used for analog functions such as microphones and interconnects. Analog has a much lower impedance requirement so cables don't have to be rated, but usually the impedance is around 45 ohms. DMX cables are what we use for lighting. |
| 37 | Supplying, installation and testing of 9 to 14 W energy efficient In-ground recessed luminaires are designed to create luminous wall architecture, or accentuate architecture elements in facades providing distinctive lighting effects. Designed for high lumen efficiency at reduced wattage creating exceptional lighting effects. Product Description - Luminaire made up of die-cast aluminium & Stainless steel, Hard chrome plated stainless steel 316 grade front ring, Silicone gasket, Toughened clear glass, Luminaire hard wired with 3 x 0.5mm2 cable of 0.5 metre length, Supplied with mounting sleeve for preparing recessed opening in ground, Cable entries for through-wiring of mains supply cable, Integral constant current power supply, CRI (Ra) : >80 (90 CRI - On Request), Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply, Ordering guide : KL-4140-CCT (Colour Temperature), Available CCT : 3000K, 4000K, 5700K, Product Benefits - High luminous efficiency at reduced wattage, A sleek and minimalist shape provides distinctive lighting effects for inground and wall architecture, Sustainable LED technology offers durability and optimal light output with low power consumption, Area of Application - Walk ways, |
| 38 | Supplying, installation and testing of 12W/M RGBW LED 1 meter Neon Flex light, Lighting gives texture, layering & depth to the Architectural structures & envelopes the space a glowing cascade of light. LED monochromatic strip light with right balance helping accentuate areas. IP67 waterproof with silicon cover, Safety input voltage for LED module, no harmful UV & IR radiations, Environment friendly as it does not contain Mercury, Instant light with low running temperatures, Operating temperature: - 20C to 50C, Average life L70B50: 35000 hours, powered by an independent, isolated, SELV output, Applications Building and Monument. 12W/M RGBW LED Neon Flax light |
| 39 | Supplying, installation and testing of 12W/M RGBW LED 5 meter monochromatic strip light, Lighting gives texture, layering & depth to the Architectural structures & envelopes the space a glowing cascade of light. LED monochromatic strip light with right balance helping accentuate areas. IP67 waterproof with silicon cover, Safety input voltage for LED module, no harmful UV & IR radiations, Environment friendly as it does not contain Mercury, Instant light with low running temperatures, Operating temperature: - 20C to 50C, Average life L70B50: 35000 hours, powered by an independent, isolated, SELV output, Applications Building and Monument. 12W/M RGBW LED monochromatic strip light |
| 40 | Supplying, installation and testing of Decodor DMXaddressing on programming LED stripes. |
| 41 | Supply and installation of Mounting Track - 1 meter |
| 42 | Supplying, installation and testing of IP67 electronic LED driver 350 W, constant voltage supply with Output Short- circuit protection, |
| 43 | Supplying, installation and testing of IP67 electronic LEDdriver 150 W, constant voltage supply with Output Short- circuit protection, Please Enable Macros to View BoQ information |
