Tender For The Work Of Renewal—Including General Repairs Using P.C. (Premix Carpet) Via A Hot Mix Plant—On The Ayana Pakar Purwa–Fariha Road (From Km 1) Passing Through Karke Ka Purwa Up To The Bharatol Road, For The Financial Year 2026-27., Auraiya-Uttar Pradesh
TDR : 54846106
Tender Notice
BOQ
Expired
Auraiya
Uttar Pradesh
Tender For The Work Of Renewal—Including General Repairs Using P.C. (Premix Carpet) Via A Hot Mix Plant—On The Ayana Pakar Purwa–Fariha Road (From Km 1) Passing Through Karke Ka Purwa Up To The Bharatol Road, For The Financial Year 2026-27.
Name of Work:- वित्तीय वर्ष 2026-27 में अयाना पाकर पुर्वा फरिहा मार्ग के किमी0-1 से करके का पुर्वा होते हुए भरतौल मार्ग पर हॉट मिक्स प्लान्ट द्वारा पी0सी0 से सामान्य मरम्मत के साथ नवीनीकरण का कार्य।
Sl. No.
Item Description
1
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
2
Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
3
20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508. Case - II By Mechanical Means(HMP 40/60) (I) Bitumen VG-10
4
Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Case - III : Type C By Mechanical Means(HMP 40/60) (I) Bitumen VG-10
5
Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
