|
| 1 | Dismantling plain cement or lime concrete work including stacking of serviceable material in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per the direction of E/I. |
| 2 | Dismantling R.C.C. work including stacking of serviceable material in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per the direction of E/I. |
| 3 | Dismantling pucca brick or lime work including stacking of serviceable material in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per the direction of E/I. |
| 4 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth & floor including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work up to plinth level:1:2:4 (1 cement: 2 coarse sand (zone-1) :4 graded stone aggregate 20 mm nominal size) |
| 7 | Taking down old door and window shutters including stacking of serviceable material in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per the direction of E/I. |
| 8 | Taking down chaukhats in door including stacking of serviceable material in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per the direction of E/I. |
| 9 | Taking down chaukhats in windows including stacking of serviceable material in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete as per the direction of E/I. |
| 10 | Supplying, fitting and fixing fully glazed steel door, windows or ventilators of standard rolled \\"Z\\" and mullion steel sections and size as per IS - 1038 joints met and welded with 100 x 16 x 3 mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15 x 10 x 10 cm, size including cost of oxidised iron fittings, with hingesm handle as per steps, catch springsm 3mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs with 20mm long 6.3 mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage of work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I. |
| 11 | Providing and laying double charge vitrified tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming ti IS 15622/ ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete. Size of Tile 600 x 600 mm. |
| 12 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 13 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 :3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, includingpointing in white cement mixed with pigment of matching shade complete. |
| 14 | Providing and laying 25mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime mortar (1:1:1) (lime putty : surkhi : coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes abd royality all complete as per building specification and direction of E/I.600 x 600 mm size |
| 15 | Providing and laying 25mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes abd royality all complete as per building specification and direction of E/I. |
| 16 | Providing 250 mm wide brick drain in cement mortar (1:6) with av. 150 mm clear depth and 250 mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 17 | Reinforded cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1:5:3 cement: 1.5 coarsesand(zone-l):3 graded stone aggregate 20 mm nominal size). |
| 18 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete. TMTC-500 8mm dia |
| 19 | 10mm (TMT Coil Fe 500) |
| 20 | 12mm (TMT Coil Fe 500) |
| 21 | TMT-500 16mm dia |
| 22 | TMT-500 20mm dia |
| 23 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I. |
| 24 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I. |
| 25 | Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royality all complete as per building specification and direction of E/I. |
| 26 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and prepairing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/I. |
| 27 | Providing two coats of snowcem of approved shade and make over old surface including washing, cleaning and prepairing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/I. |
| 28 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. |
| 29 | Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two component, factory designed, ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps :-(a) Surface preparation :-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement prouting to be done with non-shrink expanding admixture of Sika India Pvt. Ltd. / MYK Schimberg / Dr Fixit/Fosroc of equivalent. Providing and repairing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm X 150 mm fillet of mortar (Cement: sand- 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concrete base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material labour, tools complete.(b) 1st Coat: - Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application 45 gsm of Fibreglass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/Sqmt/coat. For the purpose of measurement the entire treated surface will be measured.(c) 2nd Coat:-To apply the 2nd coat of two component acrylic modified, ready to use, Flexible cementitious material right angle to the 1st coat over the glass fibre laid surface, 2nd coat should be applied @0.7 kg/ Sqmt /coat. For the purpose of measurement the entire treated surface will be measured.\\" After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Water proofing Brand:- Sika Tooseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2K / MYK Aquafin TG - Product Performance - Chemical Base Part A: Acrylic copolymer.Part B: Specially graded cementitious powder- Density 1.6 kg/l (mixed density) at +27°C - Tensile Strength :- |
| 30 | Making plinth protection 50mm thick of cement concrete 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nomial size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 31 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 32 | Earth work in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees,, shrubs all complete as per approved design, building specification and direction of E/I. |
| 33 | Filling in foundation trenches and plinth in layers not exceeding 150mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted |
| 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level:1:4:8 (1 Cement : 4 Coarse Sand : (zone-iii) : 8 graded stone aggregate 40 nominal size) |
| 35 | Providing and laying 25 mm. thick kotah stone slab flooring of approved size, texture and colour over 19mm. thick base of lime mortar (1 1 :1) (lime putty:surkhi: coarse sand) laid over and joined with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandurn stone, including cost of curing, taxes and royalty all complete as per building specification and direction af Ell. (i) 300X300 mm size |
| 36 | Providing and laying 25 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12 mm thick cement mortar (1:3) and joined with grey cement slurry mixed with pigment to match the shade of the slab including rub bing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 37 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone - III) : 3 graded stone aggregate 20 mm nominal size) |
| 38 | Reinforcement Cement Concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excludind cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 nominal size) |
| 39 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, shelves, chajjas, lintels, bands, plain window sills, staircases, and spiral staircases above plinth level upto floor five level, excludind the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size) |
| 40 | Providing designation 75A brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. Thick morter joints, cost of screening, materials, scaffolfing, raking out joints to 15mm. Depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 41 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I |
| 42 | Providing two coat of synthetic enamel paint over a coat of primer of approved shade and make over new wooden & surface after cleaning, removing dirt, scales, smokes, grease and sand paper, including cost of scaffolding and taxes all complete as per building specification and direction of E/I |
| 43 | Supplying, fitting and fixing good quality, well dressed and well seasoned local wood in choukhats in doors, windows. |
| 44 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 45 | Supplying fitting and fixing 35mm thick solid core type decorative double leaf flush door shutters. |
| 46 | Supplying, fitting and fixing MS grill gate made of 20x6mm MS flat or 16mm square bars fitted on 25x25x6mm. MS Angle frame. |
| 47 | Supplying, fitting and fixing M.S. grill made of 20x6 mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 48 | Centering and shuttering including strutting, propping, etc. and removal of form for foundations, footings, bases of columns,etc. for mass concrete |
| 49 | Centering and shuttering including strutting, propping, etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 50 | Centering and shuttering including strutting, propping, etc. and removal of form for Lintels, beams, plinth Beams, girders, bressumers and Cantilivers. |
| 51 | Centering and shuttering including strutting, propping, etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 52 | Providing & fixing Fan hook of 16 mm. dia. M.S. bar 1 Mtr. Long bent to required size and shape, placed in position and fixed in Truss Frame / RCC Slab / beam at the time of casting all complete as per building specification and direction of E/I. (Where materials is not supplied by deptt.) |
| 53 | Stone Chips |
| 54 | Cement |
| 55 | Steel |
| 56 | Brick |
| 57 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.(A) 580 mm. long(c) With 12.5 lit. low level PVC Cisten |
| 58 | Supplying, fitting and fixing 40mm high vitreous white glazed earthen E.W.C. with ‘p’ trap of parry Hindustan or any other approved I.S.S. make including supplying and fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450grams 15mm P.V.C. alkathene pipe 45cm. long with brass coupling at both ends and white/black plastic solid state seal and lead of commander/cuckoo or other I.S.S. make with hinges or screws etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide priming, all complete as per specification and direction of E/I.(i) With 'P' trap(b) 12.5 lit. low level PVC Cisten |
| 59 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 60 | Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobbins short pieces, cutting loose collars, lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc. all complete as per specification and direction of E/I.(a) 100 mm dia |
| 61 | Supplying fitting and fixing H.C.I. pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobbins short pieces, cutting loose collars, lead and yarn for making lead caulked joints, cutting pipes to size including earth work or scaffolding where necessary etc. all complete as per specification and direction of E/I.(b) 75 mm dia |
| 62 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.(B) H.C.I. Heal Rest bend(i) 100 mm dia (wt. 5.5 Kg. app.) |
| 63 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.(B) H.C.I. Heal Rest bend(ii) 80 mm dia (wt. 4 kg app.) |
| 64 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.(D) H.C.I. double junction with door and ear(i) 100 mm dia (wt. 15.5 kg. app.) |
| 65 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.(D) H.C.I. double junction with door and ear(i) 80 mm dia (wt. 15.5 kg app.) |
| 66 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.(J) Floor trap with grantings(i) 100 mm dia |
| 67 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.(K) Norton patent H.C.I. Cowel(i) 100 mm dia (wt. 3.25 kg. app.) |
| 68 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 69 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single pushfit Coupler110 mm |
| 70 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door110x110x110 mm |
| 71 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend |
| 72 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe |
| 73 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 74 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms |
| 75 | Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 76 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 77 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 78 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mmwide and effective height of 88 mm, weighing not less than170 gms |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall25 mm nominal dia Pipes |
| 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall32 mm nominal dia Pipes |
| 83 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 84 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350gms.) with extra socket all complete as per specification and direction of E/I. |
| 85 | Providing and fixing brass/C.I.Stop cock of approved quality all compelte as per specification and direction of E/I.BRASS STOP COCK15 mm dia |
| 86 | Providing and fixing brass/C.I.Stop cock of approved quality all compelte as per specification and direction of E/I.BRASS STOP COCK20 mm dia |
| 87 | Providing and fixing brass/C.I.Stop cock of approved quality all compelte as per specification and direction of E/I.BRASS STOP COCK25 mm dia |
| 88 | Point Wiring in PVC Conduit, with Modular type Switch:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required.Group C |
| 89 | Twin Control Point Wiring in PVC Conduit, with Modular type Switch:-Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required. |
| 90 | Supply and Fixing Light Plug Point with Modular Type Accessories:-Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. |
| 91 | Supply and Fixing Light Plug Point with Modular Type Accessories:-Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required. |
| 92 | Supply & fixing 20A SPN MCB Industrial Socket Outlet:- Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required. |
| 93 | Power Plug Wiring in PVC conduit (2x4 sq. mm):-Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 number 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 94 | Circuit / Sub-main wiring in PVC Conduit:-Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 2x1.5 Sqmm + 1x1.5 sqmm earth wire (For 5/6A Plug Points) |
| 95 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire |
| 96 | 2x6 Sqmm + 1x6 sqmm earth wire (For AC) |
| 97 | S/F TP MCB DB:- Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). Make :- Legrand/Anchor/Havells/HPL. v4 Ways (4+12 ways) double door |
| 98 | S/F 'C' series SP MCB:-Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. Make- Legrand/Anchor/Havells/HPL. 6/32A, Single Pole |
| 99 | S/F TPN RCCB:- Supplying and fixing following rating, TP&N ( three phase and neutral) 415Volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300mA in the existing MCB DB complete with connections, testing and commissioning etc, as required. 40 A/300mA |
| 100 | S/F Modular Boxes, base & cover plate:-Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm) |
| 101 | S/F Ceiling Rose:-Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 102 | S/F Batten / Angle Holder:-Supplying and fixing batten / angle holder including connection etc as required. |
| 103 | ITC fluorescent fitting directly on surface :-Installation testing and commissioning of Pre - wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc, directly on ceiling / wall, including connection with 1.5 Sq. mm. FR PVC insulated, copper cond. |
| 104 | ITC Ceiling Fan:-Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC insulated,copper conductor,single core cable etc, as required. |
| 105 | S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 106 | ITC Exhaust Fan/Wall Fan upto 450 mm sweep :-Installation of exhaust fan / Wall Fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required. |
| 107 | S/F Modular type Switch / Socket:-Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amp one way switch |
| 108 | 15/16 amp one way switch |
| 109 | 15/16 amp 6 pin socket outlet |
| 110 | Supplying, Installation, Testing & Commissioning of following size ceiling fan 3 blades confirming to IS 374: 2019 including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz , Single Phase supply etc. complete as required.1200mm (48\\") Ceiling Fan |
| 111 | 12\\" (300mm) exhaust Fan |
| 112 | Add 18% for G.S.T. |
| 113 | Labour Cess Please Enable Macros to View BoQ information |
