|
| 1 | Earthwork excavation in foundation in all kinds of soil within initial lead of 50m and intial lift of 1.5m including rough dressing and levelling the bed & as per specifiction approved by the E.I.C. |
| 2 | Supplying and filling in foundation trenches and plinth with sand, well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and , materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. |
| 3 | Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation and floors using 4cm (1 1/2\\") 0 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. |
| 4 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position complete as per direction of Engineer-In -Charge. A) Column Base Footing |
| 5 | B. Column |
| 6 | C. Plinth Beam |
| 7 | D. Lintel |
| 8 | E. Chajja |
| 9 | F. Roof Beam |
| 10 | G. Roof Slab |
| 11 | Supplying, Cutting, Straightening coiled or bent up M.S. rods or Tor steel of SAIL(HYSD Fe-500) welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer-in-charge All reinforcement steel and structural steel shall be procured from primary producers of steel-SAIL/RINL/TATA/JINDAL(Panther)/SHYAM STEEL. |
| 12 | Brickwork with Fly ash bricks in cement mortar (1:6) in F&P (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete in all respect as per direction of Engineer in charge. |
| 13 | Brickwork with Fly ash bricks in cement mortar (1:6) in Superstructure (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work and royalties etc. complete in all respect as per direction of Engineer in charge. |
| 14 | 12mm (1/2'') thick cement plaster in cement mortar (1:6) finished smooth to brick walls after raking out the joint including watering and curing for seven days with cost and conveyance of all materials and labour with T& P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge. |
| 15 | 16mm (5/8'') thick cement plaster (1:6) finished smooth to inside of 9''/10'' thick brick walls after raking out the joint including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge. |
| 16 | 6mm thick cement plaster (1:4) finished smooth to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with royalities etc. complete in all respect as per direction of Engineer in charge. |
| 17 | Priming 1 (One) coat with wall primer water bond cement primer including all labour, materials etc complete as per direction of Engineer-in-Charge. |
| 18 | Finishing wall surface with Weather Coat two coats with any approved shade including cost, conveyance, , cess and royalties of all materials with labour and T&P required for the work etc., complete in all respect as per direction of Engineer In Charge. |
| 19 | Distempering two coats of approved make and finished smooth and even surface of approved make to receive painting including cost of scaffolding etc. with cost of all materials, labour etc, complete, as per direction of Engineer-in-charge |
| 20 | Supplying, fitting and fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622-2006 (Group-B) of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement: 4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. |
| 21 | Providing and fixing of homogeneous vitrified tiles in dados, skirting and rises of steps /walls on/over 12mm th cement plaster (1:3) (1cement:3sand) joined with neat cement slurry mixed with pigment to match the shade of tiles, rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 22 | Providing and Fixinng factory made 100% Solid WPC (Wood Polymer Composite) -Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement and screwed with full body weaded star headed screws having minimum frame density of 780 kg/cbm and an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property. |
| 23 | Supplying . fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with Imm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per the direction of Engineer-In-Charge. |
| 24 | Supplying and fitting-fixing of Two-Track Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTA / NCL VEKA LTD.) sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 25 | Supplying, fitting, fixing of, M.S Grill for (MS Door, MS GATE ,M.S grill ,, MS Square Bar Spike to openings,tubular trusses and collapsible gate ) of approved specification and of approved size, materials and design with a coat of primer including painting two coats over a coat of redoxide primer with cost and conveyance of all materials, labour, royality, etc. complete in all respect and as per direction of Engineer-in-charge. |
| 26 | Priming 1 (One) coat with wall primer cement primer to Iron Surface including all labour, materials etc complete as per direction of Engineer-in-Charge. |
| 27 | Painting two coats of Synthetic enamel paint of approved make to Iron/Wood work with cost, conveyance, taxes of all materials and labour with T&P required for the work etc.complete in all respect as per direction of Engineer in charge. |
| 28 | EI Works:Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/ HAVELLS/RR KABLE/KEI with 20 mm dia PVC non metallic heavy duty conduit FRLS type ISI marked Make-AKG/BEC/Precision/Norpack 6A modular type ( flame retradant type) switch ISI marked Make-Schneider (Zencelo) /legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (flame retradant type) Make-Schneider (Zencelo) / legrand( Myrius) / Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. Group-A. |
| 29 | Group-B. |
| 30 | Group-C. |
| 31 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch and socket(modular type)( (anti bactorial and flame retradant type)) with suitable size modular box and cover(anti bactorial and falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider (Zencelo) / legrand( Myrius) /Panasonic (vision) |
| 32 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch and socket (modular type)( (flame retradant type)) and other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) |
| 33 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch and socket(modular type)( flame retradant type)) with suitable size modular box and cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider ( Zencelo ) / legrand ( Myrius) / Panasonic (vision)(For equipment power). |
| 34 | Recess wiring for circuit/submain wiring with the following mentioned size PVC FRLSH/LSZH insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed PVC conduit Heavy duty FRLS of mentioned size Make-AKG/BEC/ Precision/Norpak as required as per direction of Engg.-in-Charge. a) 2x1.5mm2 + 1x1.5mm2 |
| 35 | b) 2x2.5mm2 + 1x1.5mm2 |
| 36 | c) 2x4mm2 + 1x1.5mm2 |
| 37 | d) 2x6mm2 + 1x2.5mm2 |
| 38 | DBsSupply and fixing of 6 way DD single pole and neutral sheet steel MCB distribution board on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator)Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/Equivalant model of Havells/Cand S/Hager/ ABB//LandT as per direction of Engg.-in-Charge. |
| 39 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND/ Siemens/ Schneider /Equievalant model of Havells/Cand S/ ABB/Hager/LandT in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. |
| 40 | Supplying and fixing 63 Amps DP 240 volts MCB Make-LEGRAND/ Siemens/ Schneider /Equivalant model of Havells/Cand S/ ABB/Hager/LandT in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. |
| 41 | Fitting and FixturesS/F. of 250mm Sweep Exhaust fans of ISI marked.(Make-Havells /Usha/ Crompton/Orient/Bajaj/ equivalent) |
| 42 | S/F of 400mm sweep wall mounted fan. (MakeUSHA/Bajaj/Crompton/Havells) |
| 43 | Supply and Fixing of 80 watt LED High bay light fitting.MakeHavells/Bajaj/Wipro/Philips/Crompton/Panasonic |
| 44 | Supply and Fixing of 250 watt with Efficacy 120 lm/watt LED Flood light fitting.MakeHavells/Bajaj/Wipro/ Philips/Crompton/Panasonic |
| 45 | Providing and Fixing of 50mm dia G.I. Pipe Medium Class |
| 46 | S/F. of 20Wt.,100lumens/watt efficacacy, aluminium batten Light emitting diode Tube light fittings of Bajaj/Havells / Crompton/Philips/ Panasonic/ Halonix/Wipro |
| 47 | S/F. of 15 Wt. surface/recess mounting LED light fittings of Bajaj/Havells / Crompton/Philips/ Panasonic/ Halonix/Wipromake. |
| 48 | S/F. of 6 Wt. RGB surface/recess mounting LED light fittings of Bajaj/Havells / Crompton/Philips/ Panasonic/ Halonix/Wipromake. |
| 49 | SITC of Acrylic Signage Board in English and Odia language and Logo including Transportation Charges as per direction of Engineer-in-charge. |
| 50 | S/F. of 63A ICDP Main Switch of Havells/ LandT/Anchor/CandS make. |
| 51 | Supply of 6 sq.mm 2 core XLPE Cu.Armoured Cable of ISI marked.(Make -Polycab/Havells /KEI/RR Kable/Finolex/Gloster) |
| 52 | Supply of 32 mm dia HDPE Pipe . |
| 53 | Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 54 | Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required. |
| 55 | S/F of special earthing complete with 600x600x3.15mm thick copper plate , charcoal , salt including excavation of earth and filling of loose soil upto ground level including all connection and masonary work. |
| 56 | PH Works:Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS15778, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Ground Floor 20mm dia C - PVC pipe |
| 57 | 25mm dia C - PVC pipe |
| 58 | 32mm dia C - PVC pipe |
| 59 | Supplying all materials, labour TandP and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 60 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 61 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 62 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 63 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 64 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 65 | 25mm dia brass full way valve (Shakti make) |
| 66 | 32mm dia brass full way valve (Shakti make) |
| 67 | 15mm CP Extension piece |
| 68 | 125mm CP grating |
| 69 | 15mm size C.P. flange |
| 70 | supplying all materials, labour, TandP and cutting holes through existing brick work including making good the damages in cement mortar (14) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost and conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground Floor |
| 71 | Supplying all materials , labour, TandP and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (124) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge Ground Floor |
| 72 | Supplying all materials, labour, TandP and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost and conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor |
| 73 | Supplying all materials, labour, TandP and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 74 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 78 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 79 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 80 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 81 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 82 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 83 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 84 | Supplying all materials, labour TandP and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 85 | Supplying all materials, labour, TandP and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral p or s trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (11) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost and conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. European water closet with p trap plain(Hindware/Parryware/Neycer make) |
| 86 | Supplying all materials, labour TandP and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost and conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 87 | Supplying all materials, labour, TandP and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mmx600mm long CP towel rail |
| 88 | Towel ring |
| 89 | Supplying all materials, labour, TandP and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 90 | Supplying all materials, labour, TandP and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 91 | Supplying all materials, labour, TandP and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder |
| 92 | Supplying all materials labor TandP and Fitting and fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. ½ x 5 inch CP Shower (Plaza Deluxe Make) |
| 93 | Supplying all materials , labour, TandP and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 94 | Supplying all materials , labour, TandP and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 95 | Supplying all materials ,labour ,TandP and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (136) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (16) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (124) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (13) with cement punning to inside, cement flush pointing (13) to outside, R.C.C cover slab (124) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge. Inside size 76cmx76cmx46cm with 18 inch dia RCC MH cover |
| 96 | Supplying all materials ,labour ,TandP and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (124) mix using 12mm size crusher broken HG chips, foundation concrete (148) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (16) in foundation and plinth and inside 12mm thick cement plastering (13) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 97 | Supplying all materials labour TandP filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 98 | Supplying all materials, labour, TandP and providing cement concrete ( 148 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 99 | Supplying all materials, labour, TandP and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (11) ( 1 cement 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 30cmx30cm Ground Floor |
| 100 | Supplying all materials,labour,TandP and providing 12mm thick cement plaster(14) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. Ground Floor |
| 101 | Supplying all materials, labour, TandP and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (13) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 20cmx30cm Ground Floor |
| 102 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centres standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 103 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 104 | Ext P.H. Supplying all materials, labour, TandP and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufactures specification, provoding and laying in trench cement concrete (148) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 100mm dia P.V.C. pipe |
| 105 | 5 Users septic tank of size 0.75 m x 1.50m x 2.0m Internal size Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 106 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial lIft. |
| 107 | Supplying all labor TandP and filling foundation and plinth with excavated materials well watered and rammed etc. all complete as per direction of EIC. |
| 108 | Supplying all materials, labor TandP providing CC (136) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 109 | Supplying all labor TandP andProviding C.C. (124) with 12mm size broken hard granite chips including watering curing and lead of all materials to site etc. all complete. |
| 110 | Providing C.C. (11½3) with 12mm size hard granite chips of RCC work including hoisting and laying and curing with lead of all materials to site. |
| 111 | Supplying all materials, TandP and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. |
| 112 | Rigid and smooth centering and sheltering for RCC work including falls work and dismantling than after casting including cost of materials in ground floor. RCC floor, roof slab chhaja up to 4.430 m height |
| 113 | Supplying all materials labour TandP and providing 1st class KB brick work in CM (13) in foundation and plinth including watering and curing and lead of materials to site. |
| 114 | Supplying all materials labour TandP and providing 12mm thick C.P (13) including watering curing and conveyance of all materials to site. |
| 115 | Supplying all materials labour TandP and providing cement punning including watering curing and conveyance of all materials to site. |
| 116 | Supplying all materials labor TandP filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
