|
| 1 | Supply & fixing of Spare parts for the EOT Cranes of capacity more than or equal to 2 (two ) tonnes but less or equalto 50 (fifty ) tonnes installed at different location in Laboratory buildings and workshop buildings. This shall also include arrangement of scaffolding, removal the existing component and staking the same at division's stores; supply, integration and testing of brand new spares to show proper performance all as per detailed tender specifications. |
| 2 | Magnetic Brake upto 1T capacity crane |
| 3 | Magnetic Brake of above 1T and upto 2Tcapacity crane |
| 4 | Magnetic Brake above 2T and upto 5Tcapacity crane |
| 5 | Magnetic Brake above 5T and upto 10Tcapacity crane |
| 6 | Magnetic Brake above 10T and upto 50Tcapacity crane |
| 7 | Magnetic Coil Break ; Drum OD 50mmto 75mm |
| 8 | Magnetic Coil Break ; Drum OD above75 mm and upto 100mm |
| 9 | Magnetic Coil Break ; Drum OD above100 mm and upto 150mm |
| 10 | Crane duty bearing (ID 25 mm to 50 mm) |
| 11 | Crane duty bearing (ID above 50 mm andupto 75 mm) |
| 12 | Crane duty bearing (ID above 75 mm andupto 100 mm) |
| 13 | Crane duty bearing (ID above 100 mmand upto 150 mm) |
| 14 | Crane duty bearing (ID above 150 mmand upto 200 mm) |
| 15 | Hydrolic Thruster Brake ; Drum OD100mm to 150mm |
| 16 | Hydrolic Thruster Brake ; Drum ODabove 150 mm and upto 200mm |
| 17 | Hydrolic Thruster Brake ; Drum ODabove 200 mm and upto 250mm |
| 18 | Hydrolic Thruster Brake ; Drum ODabove 250 mm and upto 300mm |
| 19 | Rope Guide OD upto 6mm |
| 20 | Rope Guide OD above 6 mm and upto10mm |
| 21 | Rope Guide OD above 10 mm and upto15mm |
| 22 | Rope Guide OD above 15 mm and upto20mm |
| 23 | Current Collector |
| 24 | Limit Switch (2 in 1) |
| 25 | Radio Remote (wire less) |
| 26 | PVC Wire rope for Pendent |
| 27 | Wire Rope OD upto 6mm |
| 28 | Rope OD above 6 mm and upto 10mm |
| 29 | Wire Rope OD above 10 mm and upto15mm |
| 30 | Wire Rope OD above 15 mm and upto20mm |
| 31 | Shaft, forged Material- EN24, Hardness 30 to 45 HRC |
| 32 | Gears, forged Material-EN353, Hardness 40 to 50 HRC |
| 33 | Couplings, Crane duty- Replaced by similar type |
| 34 | Crane wheel , Material forged/Cast Steel, Hardness 250- 300 BHN |
| 35 | DSL Buss bar (125 Amp 4 Bar RYB Green :GI |
| 36 | Brake Liner |
| 37 | Periodic inspection, preventive maintenance and servicing of EOT cranes of following capacity, at all heights, generally as per following steps including carrying out field test to assure safe use complete as per specifications and as directed by authorized representatives of RRCAT: |
| 38 | For EOT cranes of capacity more than 5 (five) tonnes but less or equal to 10 ( ten) tonnes. |
| 39 | For EOT cranes of capacity more than 3 ( three) tonnes but less or equal to 5( five) tonnes. |
| 40 | For EOT cranes of capacity more than 2 (two) tonnes but less or equal to 3 (three) tonnes. |
| 41 | For EOT cranes of capacity up to and including 2 (two) tonnes. |
| 42 | For Mono rail cranes of capacity up to and including 3 (three) tonnes. |
| 43 | For EOT cranes of capacity more than 30 (thirty ) tonnes but less or equal to 50 ( fifty) tonnes. |
| 44 | Carrying load testing of the crane as per I S 3177 latest edition and AERB guidelines as and when informed and taking out measures as required for ensuring effective brake system for all the three movements of crane, efficient performance of limit switches, power units, all fuses, indicators, push buttons, reassembling of bearings, pendents etc including replacement consumables if any, servicing of gear box, drum, rope, all moving parts, mechanical parts including rails, guides, welds etc complete and maintain the same to ensure proper functioning of brakes. Frequency of the load test shall be once in a year as per tender technical specification. |
| 45 | For EOT cranes of capacity more than 5 (five) tonnes but less or equal to 10 ( ten) tonnes. |
| 46 | For EOT cranes of capacity more than 3 ( three) tonnes but less or equal to 5 ( five) tonnes. |
| 47 | For EOT cranes of capacity more than 2 (two) tonnes but less or equal to 3 (three) tonnes. |
| 48 | For EOT cranes of capacity up to and including 2 (two) tonnes. |
| 49 | For Mono rail cranes of capacity up to and including 3 (three) tonnes. |
| 50 | For EOT cranes of capacity more than 30 (thirty ) tonnes but less or equal to 50 ( fifty) tonnes. |
| 51 | Carrying out Hydrostatic Pressure testing of Pressure Vessels containing any type of fluid in reservoir/vessel under pressure in the design working pressure range of 1.5 bar to 60 bar as per tender specification. |
| 52 | For Pessure Vessels up to 500 lt. Capacity. |
| 53 | For pressure vessels from 501 Lt. to 1000 Lt. Capacity. |
| 54 | For pressure vessels from 1001 Lt. to 2000 Lt. Capacity. |
| 55 | For Hp Tank of about 8000 Lt. Capacity . |
| 56 | Carrying out Ultrasonic test for measurement of thickness of Pressure Vessels containing any type of fluid in reservoir/vessel under pressure in the design working pressure range of 1.5 bar to 60 bar and calibration of gauges fixed on such vessels including testing of all associated safety valves as per tender specification: Please Enable Macros to View BoQ information |
