|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group -B) |
| 2 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 3 | Wiring for Group controlled (looped) light point/ fan/ exhaust fan point/ call bell point (with out independent switch etc) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 4 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 6 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. |
| 7 | Supplying and fixing metal box of 200mm X 125mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. |
| 8 | Supplying and fixing following Piano type switch/ socket on the existing switch box/ cover including connections etc. as required. a) 5/6 Amp. Switch |
| 9 | Supplying and fixing following Piano type switch/ socket on the existing switch box/ cover including connections etc. as required. b) 3 pin 5/6 Amp. Socket outlet |
| 10 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 8 way Double door |
| 11 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole |
| 12 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.a)40amp |
| 13 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 14 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 15 | Providing and fixing 6 SWG dia G.I. Wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/ cable as required. |
| 16 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 x 16 sq. mm (22mm) |
| 17 | Providing, laying and fixing of 40 mm dia GI pipe (medium class) for laying of U.G Cable including cutting of wall/ floor in stairs and making good with concrate and cement after fixing of GI pipe etc as required (ISI marked Make-Jindal). |
| 18 | Providing and Laying of one number XLPE insulated and PVC sheathed armoured power cable of 1.1 KV grade of size 2 x 16 sq mm, Conf. to IS:7098 part - I of direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. make Havells / Polycab / Finolex / KEI. a) 2x16 Sqmm |
| 19 | Providing and fixing of 600 x 600 mm x 300 mm joint box made out of 14 SWG thick CRCA sheet Powder coated with Siemens Grey colour shade , front door with Pad -locking arrangement floor moounted with 600 mm x300 mm frame and 1000mm long 04 Nos legs made out of 35 mm x 35 mm x 5 mm thick angle, out door type, dust proof front door openable having hinged cover, and rain proctected canopy cover at top complete with 4 Nos bus bars of 100 Amp capacity Joint box shal be suitable for three phase, 415 volt AC supply etc as required and Graunting the same in cement concrete foundation in 1:3:6 (1 Cement :3Corse : Sand:6 graded stone chips aggregate ) etc as required. |
| 20 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for size of 3½ X 35 sq. mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 21 | Supplying and fixing Fan Hook/ Clamps suitable for mouting 1200 / 1400 mm sweep ceiling fan etc as required. |
| 22 | Supplying and fixing Piano Rotary Socket Size electronic fan regulator on the existing phenolic laminated sheet switch box including connections but excluding sheet plate etc. as required. |
| 23 | Supplying,Installation, testing and commissioning of 1200 MM Sweep, 380 rpm, High Speed ceiling fan having three blades double ball bearing including wiring the down rod of standard length (upto 30 cm.) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable with connection, testing, commissioning etc as required. Providing and fixing phenolic laminated sheet cover on the fan box etc as required. ( Fan crompton make model: cool breeze / Havells/ Khaitan/Bajaj/Orient) |
| 24 | Supplying and fixing of 9 watt LED batten mirror light polycarbonate housing & integrated electronic driver, slim fixture 6500k ,cool day light, all in one fixure with wire complete with connection ,testing, commissioning etc as required .Havells Model No lumiline plus make or equivalent make Bajaj/ Surya/ Philips/ Crompton. |
| 25 | Supplying and fixing LED Bulk head fitting i/c 10 W LED Lamp complete with connection, testing commissioning etc as required. Make- Havells Model No. EXAFT10WLED857SSYMBOPC / Bajaj /Phillips /Crompton/Crabtree/Surya |
| 26 | Supplying installation testing and commissioning of Metal Body Exaust fan 300 mm size,High Speed 1300-1380rpm range with self opening louvers in the existing wall/ iron grill with suitable size washer /G.L. Stril ,sleeves, Nut & Bolts PVC connectors for making connections i/c to suitable size for fan and making the hole to suitable size of fan and making good the damage complete and louver shuters etc as required. Crompton Model No Drift air make Havells/Bajaj/Orient make. |
| 27 | Supplying and fixing 4 watt step light in white powder coated cast aluminium body with IP 54 Protection including making connection etc as required. Make Bajaj model Razor or Havells / Philips / Crompton. |
| 28 | Supplying and fixing wall mounted Led foot lighting of 04 Module i/c inuilt LED lamp with connection, testing, commissioning etc as required. Make Havells (ORO Range, AHOPFCGL04) / Bajaj/ Philips/ Crompton/ Crabtree/ Legrand |
| 29 | Providing and fixing 750 watt, 24 Volt single phase PWM solar power package consisting of 1 KVA capacity, 24 V rated solar conditioning unit 3X 550 Wp solar PV Module having nominal voltage 24 V, 02 nos LMCA C-10 rated 12 V, 150 AH tubular solar battery including galvanized iron stand, internal wiring with PVC insulated copper wire, junction box etc as required , the solar PCU unit should consists of the following a) Solar charger controller- single phase solar charge controller based on PWM technology, max input PV current 40 A, Protection against over current, battery over charger, PV/Battery reverse polarity , reverse current , battery over charger, PV/Battery reverse polarity, reverse current and high temperature, B) Inverter- 24 Volt DC input and 220 V pure sine wave output at rated load 1 KVA@ .8 PF , Efficiency >85% C) Grid Charger: I/P Voltage range WW 175-285 & NW 190-265 +/-10V, Grid charging current 13+/-1A, PV Module Make- Vikram/Waaree/Renewsys/Sukam/jakson/Tata, Inverter make Luminious/Microtax/Exide Please Enable Macros to View BoQ information |
