|
| 1 | Wiring for light point/fan point/ exhaust fan / call belli point with 1.5 Sq. mm, PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group \\"C\\" |
| 2 | Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front induding providing and fuang 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections etc. as required. |
| 3 | Wiring for light plug with 2x1.5 54. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single care copper conductor cable for earthing as required. |
| 4 | Wiring for power plug with 2x4 Sq mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 5 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 6 | Supplying and fixing brass batten/angle holder inducing connections etc. as required. |
| 7 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, induding providing and foxing phenolic laminated sheet cover on the fan box and earthing etc. as required: Ceiling Fan 1200 mm sweep, Category-A |
| 8 | Supplying and erection of 6 amps, to 32 amps. rating, 10 KA breaking capaoty, 240 volts, C curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole, Cat-A. |
| 9 | Supplying and erection of 6 amps. to 32 amps, rating, 10 KA breaking capacity, 240 volts, C curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required: Double pole, Cat-A. |
| 10 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required:- 63 Amps. Cat-A |
| 11 | Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required:- 63 Amps. Cat-A |
| 12 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification levels interconnections, phosphatize and power painted including earthing etc. as required:- Single door- 12 way |
| 13 | Earthing with G.1, earth plate 600mm x600mmx6mm thick, including accessories and providing masonry endosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 14 | Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. |
| 15 | Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required. |
| 16 | Providing, fixing of F.N. TPN Switch Disconnector Fuse (S.D.F.) 200 Amp. complete in all leads and lifts as per direction and to the entire satisfaction of Engineer in Charge. |
| 17 | Providing, fixing of surface mounting aluminium base 20 Watt LED tube light with all accessories connection, testing and commissioning etc. complete in all leads and lifts as per direction and to the entire satisfaction of Engineer in Charge. |
| 18 | Providing, fixing of 12 Watt LED lamp complete in all leads and lifts as per direction and to the entire satisfaction of Engineer in Charge |
| 19 | Providing, fixing of ENDURA SUNDOWN new genration energy saving and environmental frinedly long life LED street light including 75 watt LED bulb Havells make made up off pressure die cast aluminium housing with high efficiency LED as lighting source and toughened glass having bottom opening seperate driver compartment with IP66 protection and impect resistance of IK07 complete in all leads and lifts as per direction and to the entire satisfaction of Engineer in Charge |
| 20 | Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5min, welded frame work made of M.S. angle iron 50 mm x 50 mm x 6 mm thick with sufficient numbers of horizontal & vertica intermediate members (25mm x 6mm thick) flat iron including painting and bonding to the existing earth as required |
| 21 | Providing, fixing of 200 Amp. Kit Kat of standard make complete in all leads and lifts as per direction and to the entire satisfaction of Engineer in Charge. |
| 22 | Providing, fixing of 25 itr. Electric gyser of Havells/Bajaj/Usha make complete in all ads and lifts as per direction and to the entire satisfaction of Engineer in Charge. Please Enable Macros to View BoQ information |
