|
| 1 | Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts. |
| 2 | Dismentaling of GMS Tube ( L) grade of following dia and stacking properly at site complete with in all leads and lifts as per the entire satisfaction of Engineer in charge. |
| 3 | 80 mm dia |
| 4 | 100 mm dia |
| 5 | Relaying, jointing (by way of circumferntial butt welding joints by electric arc welding ) and testing of Galvanised mild steel tubes ( GI pipe) of following diameter confirming to IS:1239-1990( latest with up to date ammendments) having minimum wall thickness as per IS code with bevelled/ plain ends in a random lengtth of 4 to 7 meters , including manufacturing reducers/ tapers, all short pices bends etc and class of pipes specified below, provided and jointe as per site requirement made from parent tubes. including lowering and laying in excavated trenches to ensure required level including flushing , cleaning and hydraulic testing complete in all respect to the satisfaction of engineer in charge . the fabricated bends shall have three or four cuts having its radius not less then five times the dia of pipe . the damaged portion of the pipes and specials made from the parant tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bitumenous paint over a primming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. |
| 6 | 80 mm dia |
| 7 | 100 mm dia |
| 8 | Providing laying, jointing (by way of circumferntial butt welding joints by electric arc welding ) and testing of Galvanised mild steel tubes ( GI pipe) of following diameter confirming to IS:1239-1990( latest with up to date ammendments) having minimum wall thickness as per IS code with bevelled/ plain ends in a random lengtth of 4 to 7 meters , including manufacturing reducers/ tapers, all short pices bends etc and class of pipes specified below, provided and jointe as per site requirement made from parent tubes. including lowering and laying in excavated trenches to ensure required level including flushing , cleaning and hydraulic testing complete in all respect to the satisfaction of engineer in charge . the fabricated bends shall have three or four cuts having its radius not less then five times the dia of pipe . the damaged portion of the pipes and specials made from the parant tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bitumenous paint over a primming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. |
| 9 | 80 mm dia |
| 10 | Providing, installationg, commissioning and testing of squirrel cage induction motor 3 phase KSB/Kirloskar/Crompton Greaves/ABB/ Mathar platt with gear box of required capacity with base plate and all other required accessories and cabling work with in all leads and lifts and to the entire satisfaction of Engineer in charge. |
| 11 | 1.00 HP motor with gear box for flush mixer with rotating flocculator 1440 rpm |
| 12 | 1.50 HP motor with gear box for chamical house 1440 rpm |
| 13 | 2.00 HP motor with gear box for gaseous chlorination 1440 rpm |
| 14 | 2.00 HP motor with gear box for flocculator with rotating blade flocculator |
| 15 | Providing and fixing of 5.00 HP Monoblock pump set of KSB/Kirloskar/Crompton Greaves/ABB/ Mathar platt for lifting clear cold water with upto date amendments. The pump shall be capable of working dry condition and it should include the cost of bearing, nuts and bolts etc. Complete and should meet the following data:- Total head:- 24 meter Discharge:- 6.25 LPS |
| 16 | Providing and fixing of copper PVC insulated armoured power cable 2.5 sqmm 3 core of suitable size and capacity to motors and all other electircal equipments as per IS:1554(P-I) 1988 or latest ith upto date ammendments of siemens/GLOSTER /IEC/ICC/EICO/NATIONAL/GRANDLAY/Havells/KEI make including all other accessories such as thimbles, flexible pipes,solders,nuts and bolts cable glands etc. laid in pipes or trenches under floor and to the entire satisfaction of Engineer - in - Charge. . |
| 17 | Providing and fixing of Aluminium PVC insulated armoured power cable 10 sqmm 4 core of suitable size and capacity to motors and all other electircal equipments as per IS:1554(P-I) 1988 or latest ith upto date ammendments of siemens/GLOSTER /IEC/ICC/EICO/NATIONAL/GRANDLAY/Havells/KEI make including all other accessories such as thimbles, flexible pipes,solders,nuts and bolts cable glands etc. laid in pipes or trenches under floor and to the entire satisfaction of Engineer - in - Charge. . |
| 18 | Providing and fixing of Aluminium PVC insulated armoured power cable 120 sqmm 4 core of suitable size and capacity to motors and all other electircal equipments as per IS:1554(P-I) 1988 or latest ith upto date ammendments of siemens/GLOSTER /IEC/ICC/EICO/NATIONAL/GRANDLAY/Havells/KEI make including all other accessories such as thimbles, flexible pipes,solders,nuts and bolts cable glands etc. laid in pipes or trenches under floor and to the entire satisfaction of Engineer - in - Charge. . |
| 19 | Providing and fixing of starter (direct on line) of 3.00 HP of standard make such as L&T/ MEI/ Havels/AVON/ Crompton/ Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capacble of mounting a voltmeter 0 to 300 volts capacity and ampere meter of capcity 0 to 150 ampere of standard make complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge. |
| 20 | Bus bar chamber having three copper bars of suitable rating for full length equal to the width of the board for three live phases and suitable for inducted current, one 3 copper bar of half the rating of full length for neutral phase as per IS 8084-1976 and IS:11353-1985 read with BIS 5578-1985 with upto date ammendments. 63 Ampere. 4 way. |
| 21 | Providing and fixing of LED slim tube light 18 watt energy saving of reputed make complete with in all leads and lifts and to the entire satisfaction of Engineer in charge. |
| 22 | Providing and Fixing Air blower of Blowvacc roots blower make and model BV59H with electric motor and all other required accessories and cabling work with in all leads and lifts and to the entire satisfaction of Engineer in charge. |
| 23 | Demolishing Renforced cement concrete work manually/by mechanically means including stacking of steel bars & Disposal of unserviceable material within 50meter lead all complete as specified & As per direction & entire satisfaction of Engineer in charge. |
| 24 | Providing and laying cement concrete 1:4:8( 1cement:4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth. |
| 25 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in : |
| 26 | Foundations, footings, bases of columns and the like and mass concrete. |
| 27 | Providing & laying tor steel reinforcement for RCC work including straightening, cutting, bending, placing in position & binding all complete upto or above plinth level of mild steel & medium tensile steel bars all complete as specified & directed by the Engineer-in-charge. |
| 28 | Supplying and filling in plinth with sand under floors, including watering, ramming,consolidating and dressing complete |
| 29 | Providing and fixing Zinc Aluminium Steel Drinking Water Storage tank rising conical proof with HDG roof trusses and Lockable Access hatch including all fittings including 1 No. higher heavy duty cage Ladder GI 1 No Nylon rope and aluminium step access ladder hatch on roof outlet and over flow nozzles level indicator of material of provide by STAC and warranty of 10 Years including fixing of three laps under the roof 65 mm Dia inlet over flow and scour pipe and 65 mm dia and outlet welding all accessories with sluice valve in each point including all leads and lift with entire satisfaction of engineer in charge. (1,58,000 ltr capacity) ROOF SPECIFICATION:-Roof Type: Self Supported Dome TypeBulk Density Kg/Cum.: 1000Kq/m^3Sesmic Zone :- Zone IVRoof Angle: 8 Degree 30Wind Speed:- 180km / HrRoof Structure: Hot Dipped GalvanizedTECHNICAL SPECIFICATIONS OF SHEETWall Sheet Yield Strength: 300MPAWall Sheet Tensile Strength :- 340 MPAElongation:- 18%Sheet Corrugation Space :- 75mm Depth:- 18mmThickness: 0.8mm Each Corrugated SheetMake of Sheet:- TATA Bluescope Sheet Galvanize Coating: Zinc Alume ZA 150MOC of Sheet :- ZincalumeTECHNICAL SPECIFICATION OF LINERWeight/ Sqm. (CSM): 760 gsm Anti-Algae Stabilized: YesBoth Side PVC Food Grade :- Yes Thickness (mm):- 0.8mmWater Proofness:- 200 PSIStandred Colour :- Grey Base Febric: High Teenacity Polyster Filament YarnTemprature:--10 to +60 Degree Celcius PH Range :- 3 to 13Tested:- 2Kg/cm2 for any leaks Please Enable Macros to View BoQ information |
