|
| 1 | Demolition and breaking up drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia of pipe 150 mm complete all as specified and directed. |
| 2 | Demolition and breaking up drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia of pipe 200 mm complete all as specified and directed. |
| 3 | Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 4 | Returning filling including spreading leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed. |
| 5 | Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed. |
| 6 | M&L for PCC (1:3:6) type C2 (using 40 mm graded stone, aggregate) as in concrete bed to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipe complete all as specified and directed. |
| 7 | M&L PCC 1:3:6 type C2 (using 40 mm graded stone, aggregate) as in concrete bed to drain pipes including packing under haunching against the sides of pipes after they are laid and tested for 200 mm dia SWG pipe all as specified and directed. |
| 8 | S&F DWCPE(SN4) 150mm diameter sewage pipes including snap fit coupler and rubber ring incl testing ,properly jointing and laying in trenches to a level bed complete all as specified by Engineer-in-Charge |
| 9 | S&F DWCPE(SN4) 200mm diameter sewage pipes including snap fit coupler and rubber ring incl testing ,properly jointing and laying in trenches to a level bed complete all as specified by Engineer-in-Charge |
| 10 | Cleaning of EWC's, IWC's, bottle traps, Nahani traps, gully traps and floor traps etc and CI/ PVC pipes all types top to bottom including junctions etc, cleaning of sewage line upto GT in the area of Old/New Md accn and all OTM types of Accn complete all as specified by Engineer-in-Charge |
| 11 | Cleaning of GT's in the area of Old/New in Md accn and all types of Accn complete all as specified by Engineer-in-Charge |
| 12 | Cleaning of manhole depth of upto 1.8 m in the area of Old/New as in Md accn and all types of Accn and taking out sludge and depositing them to notified area by Municipal corp of Haldia for dumping or out side Defence land complete all as specified by Engineer-in-Charge |
| 13 | Cleaning of Manhole depth exc 1.8 m in the area of Old/New as in Md accn and all types of Accn including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge |
| 14 | Cleaning of Sewage line from GT to 1st Manhole in the area of Old/New as in Md accn and all types of Accn including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge |
| 15 | Cleaning of sewage line n.exc 10 m in length in the area of Old/New as in Md accn and all types of Accn including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge |
| 16 | Cleaning of Sewage line exc10.00mtr but and n.exc 20.00 m in length in the area of Old/New as in Md accn and all types of Accn including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge . (Note :- This item will be measured if length exceed from 10.00mtr.) |
| 17 | Cleaning of Sewage line exc 20.00 mtr but not exc 30.00mtr in length in the area of Old/New as in Md accn and all types of Accn including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as directed and as specified. Note :- This item will be measured if length exceed from 20.00mtr.) |
| 18 | Cleaning of Sewage line exc 30.00mtr but n.exc 50.00mtr and exceeding in length in the area of Old/New as in Md accn and all types of Accn including removal of all waste etc obtained during cleaning of sewage line within 500 m range complete all as specified by Engineer-in-Charge (Note :- This item will be measured if length exceed from 30.00mtr.) Note :- For execution of item srl No 10 to 18 above agency should deploy minimum of 01 Nos of Safaiwala on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended prompty within 04 hours so that health and life troops and their families may not be adversly affected. The Delay in rectification of complaint more than four hours, the penality will be levied @ Rs.100.00 Per complaint. |
| 19 | Mechanically used high pressure Super Sucker Machine capable of Air lifting of dense sludge like muds, slurry, small stones, debries, grits etc from sewer lines/Manholes thorough vaccum mode and capable of Jetting sewer lines of any dia. The machine shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE..( For ,Sanjay vihar ,Old / New APS Signal encalve and adjoining area ) Note: Rates quoted cleaned for 08 hrs of super sucker machine. Any work carried out throughout 08 hrs shall be measured as on Job. |
| 20 | Dismantling of 110 mm dia PVC pipe jointed in cement mortar and taking out old pipe complete all as specified and directed. |
| 21 | S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 22 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors bore of pipe 75 mm. |
| 23 | S&F PVC (SWR) bends any radius of 110 mm dia with access door complete all as specified and directed. |
| 24 | S&F PVC (SWR) bends any radius of 75 mm dia with access door complete all as specified and directed. |
| 25 | S&F 110 mm dia PVC (SWR) Cowls all as specified and directed including taking down old one.. |
| 26 | S&F PVC (SWR) floor trap, 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed including taking down old one. |
| 27 | Cleaning of 500 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing Date of cleaning on tank complete all as specified and as directed. |
| 28 | Cleaning of 1000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing of cleaning on tank complete all as specified and as directed. |
| 29 | Cleaning of 2000 litres capacity PVC water storage tank by taking down existing inlet and outlet pipes, setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing of cleaning on tank complete all as specified and as directed. |
| 30 | Demolition of brick work built in cement mortar in any description and position, complete all as specified and directed. |
| 31 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar (1:6), complete all as specified. |
| 32 | M&L for brick work with fly ash brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar (1:6), complete all as specified. |
| 33 | All as per item 32 above but except bricks complete all as specified and directed. |
| 34 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)and removing unserviceable material outside cantt area complete all as specified and directed. |
| 35 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition). (upto 4 storied bldg) complete all as specified and directed. |
| 36 | M&L in repairs for Machine pressed concrete interlocking paver block 80 mm thick M-40 grade conforming to IS 15658 -2006 complete all as specified and directed. |
| 37 | M&L for sand cushioning for paver block not exceeding 40 mm thick complete all as specified |
| 38 | M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggregate complete all as specified and directed. |
| 39 | M&L for providing PCC (1:4:8) type D2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 40 | M&L for cement concrete (1:3:6) type C2 using 40mm graded aggregate in surface channels and drains etc incl demolition of existing drain, surface channel all as specified and disposing of debries etc as directed by Engr-in-Charge. |
| 41 | M&L for cement concrete (1:2:4) type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified |
| 42 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified. |
| 43 | M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified & directed. |
| 44 | M&L for Pre-cast reinforced cement concrete 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in CM (1:6) including necessary forms, moulds etc complete all as directed . |
| 45 | M&L providing pre-cast cement concrete (1:2:4) Type B0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies, 55 mm thick (measured solid), including all moulding but excluding frame and set in cement mortar (1:4) complete all as specified & directed. |
| 46 | M&L for cutting existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 Round or 3/4 Section) in cement concrete 1:2:4, type B1, smooth finished and re-forming benching as required complete all as directed for 150 mm dia pipe. |
| 47 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside cantt area. |
| 48 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4)mixed finished even and smooth without using extra cement including taking down old plaster complete all as specified. |
| 49 | M & L for preparation newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfaces complete all as specified and directed. |
| 50 | M & L for preparation old plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfaces complete all as specified and directed. |
| 51 | M & L for preparation old plastered surfaces of wall and applying two coats of white wash over a coat of chalk whiting priming paint on plastered surfaces complete all as directed. |
| 52 | M&L for Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 53 | M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coats of synthetic enamel paints all as specified. |
| 54 | M&L for preparation of old steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paints all as specified. |
| 55 | Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 56 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 57 | Taking up or down 15mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed. |
| 58 | Taking up or down 20mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed |
| 59 | Taking up or down 25mm bore steel water tubing and connections,including cleaning for removal to store(GI Pipe) complete all as specified and as directed |
| 60 | Dismantling of 100/75mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 61 | S&F CPVC pipes 15 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. complete all as specified and directed. |
| 62 | S&F 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as directed. |
| 63 | S&F 25 mm bore (Outer dia) CPVC pipes of SDR 13.5 and plain CPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed. |
| 64 | S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 65 | S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. |
| 66 | S&F 20mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 67 | S&F 25mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. |
| 68 | S&F PVC (SWR) bends 110mm dia complete all as specified and directed. |
| 69 | S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed. |
| 70 | S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete complete all as specified. |
| 71 | S&F in repairs vitreous china wash hand basin, white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. |
| 72 | S&F in repairs Brass chromium plated 32 mm bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 73 | S&F in repairs 15mm bore CP angular valve fancy type,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed. |
| 74 | S & F in repairs 15 mm Dia CP Bib taps,fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 75 | S & F in repairs 15 mm Dia CP Bib taps (Two-in-one), fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 76 | S & F in repairs 15 mm Dia CP stop cock(concealed type) , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 77 | S&F in repairs 15 mm bore CP pillar taps, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure ,complete all as specified and directed. |
| 78 | S & F in repairs 25 mm Dia brass gun metal gate valve , with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 79 | S&F in repair CP Health faucet with all necessary fittings . Make : Prayag/Cera/Jaquar or equivalent Make : Prayag/Cera/Jaquar or equivalent complete all as specified and directed. |
| 80 | S&F in repair 600 mm PVC connection pipe 15 mm size with PTMT nut of following length complete all as specified and directed . |
| 81 | S & F in repair 110/125 mm floor trap fixed in floor with grating incl jointing with solvent 1:2:4 cement concrete,complete all as spd and directed |
| 82 | S&F 600 mm x 450 x 6 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick| AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass| screws and cup washers comlete all as specified and directed. Make Prayag Catpart No BLM-01 F or equivelant |
| 83 | S&F in repair brass CP Shower roses in repair with or without swivel joints, 125mm size, including fixing to steel pipes or union comlete all as specified and directed. |
| 84 | S&F CP Soap dish, fixed to plugs with chromium plated brass screws comlete all as specified and directed. |
| 85 | S&F in repair brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specfied and directed. |
| 86 | S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by GE complete all as specified & directed. |
| 87 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each. |
| 88 | S&F for Factory made single extruded WPC(Wood polymer composite) solid door Frames of size 45x70 mm comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as directed. |
| 89 | S&F for Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof , water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per directions of Engineer-in-charge complete all as specified and as directed |
| 90 | S&F Stainless steel handles 150mm long, bright polished complete, all as specified . |
| 91 | S&F stainless steel 250mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts complete, all as specified . |
| 92 | S&F stainless steel anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified . |
| 93 | Dismantling floor , earth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, all as specified. |
| 94 | M&L Anti-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed with adesive and pointed in epoxy grout with spacers including 15mm thick screed bed in CM (1:4) complete all as specified & as directed. |
| 95 | M&L for glazed ceramic (coloured) tiles of size 450x350 6-7mm thick as in vertical surface/dado set and jointed in adesive and pointed in white or coloured cement to match including 10 mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 96 | M&L for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate complete all as specified |
| 97 | M&L for Two coats of synthetic enamelled paint on New wooden surface exc 10cm width or girth including preparation complete all as specified and as directed. |
| 98 | Disnantling MS work of any type complete all as specified and directed |
| 99 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 100 | S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in including dismantling existing water storage tank |
| 101 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in including dismantling existing water storage tank complete all as specified & as directed. |
| 102 | S&F in repairs 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms complete all as specified & as directed. |
| 103 | S&F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210gms) complete all as specified & as directed. |
| 104 | S&F in repairs 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified & as directed. |
| 105 | S&F 100 mm bore CI pipe in any length with cement joint fixed on wall including taking down old one complete all as specified & as directed. |
| 106 | S&F 75 mm bore CI pipe in any length with cement joint fixed on wall including taking down old one complete all as specified & as directed. |
| 107 | S&F 100 mm Bend of any radius diminius pieces etc complete all as specified & as directed. |
| 108 | S&F 75 mm Bend of any radius diminius pieces etc complete all as specified & as directed. |
| 109 | S&F 100 mm Branch pieces of any radius diminius pieces etc complete all as specified & as directed. |
| 110 | S&F 100 mm Branch pieces of any radius diminius pieces etc complete all as specified & as directed. Please Enable Macros to View BoQ information |
