|
| 1 | Dismantling post or struts (wood,steel or RCC) any section, including taking out embedded portion in concrete and making good the disturbed ground complete all as specified and as directed. |
| 2 | S&F for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) wind ties etc including all necessary welding, drilling etc and similar works confirming to Fe-290 grade E-165 complete all as specified and as directed. |
| 3 | S&F in repair Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bollts incl securing or tying at crossing with and provision of heavy duty galvanised mild steel wire, staples or staple pins etc as directed (Each line wire to be measured) complete all as specified and as directed. |
| 4 | S&F in repairs GI concertina coil fixed on angle iron post/struts with 3.15mm dia Gl wire (indernal dia 750mm) complete all as specified and as directed. |
| 5 | M&L for cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) In lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 6 | Dismantling of Mild Steel Work of any description not otherwise provided for complete all as specified and as directed. |
| 7 | S&F mild steel work as in Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed. |
| 8 | M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 9 | M&L for Preparation of old or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 10 | Dismentling of Precast Concrete article and precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 11 | M&L for precast cement concrete Block Masonary Type C-1, 1:3:6 with solid blocks exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 12 | M & L for Providing precast cement concrete type C0 1:3:6 (12.5 mm aggregate) louvres and jallies including in between pillars, 75 mm thick set in cement mortar 1:4 (mea sured solid), including all mould- ings but excluding frame complete all as specified and as directed. |
| 13 | Taking down cement plaster on brick or concrete wall surface of any description including raking out joints scrubbing down with water complete all as specified and as directed. |
| 14 | M&L for rendering to brick / concrete surfaces, 15 mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 15 | Material & Labour for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 16 | M&L Preparation of old plaster/ Concrete surface of wall, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including filling up all cracks and defects with CM 1:3 complete all as specified and as directed. Please Enable Macros to View BoQ information |
