|
| 1 | M&L for application of Ist coat including preparation of existing black top road surface by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical means (airless spraying machine) complete all as spd and directed. |
| 2 | M&L for application of 2nd coat after two days of Ist coat (given in Item No.-1) and preparation of existing black top road surface by brushing with wire brushing for removing cacked mud etc sweeping with brooms and finally fanning the plain surface with gunny bags or air compressor and to remove all loose dirt and applying one coat of black road marking paint (water based) spraying with mechanical mean (airless spraying machine) complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete as specified . |
| 4 | M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. Note-water proofing compound shall be measured and paid separately. |
| 5 | M&L for rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | Supply only Liquid water proofing compound ISI marked. |
| 7 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling by making free from dampness, oil or any loosely held particles, filling cracks if any with crack seal and applying a coat of Dampstop Advanced of Berger or equivalent of Sika/ Asian Paint/ Fosroc on saturated dry surface of wall as per manufacturer's instruction complete all as specified and directed. Note : Work will be carried out upto a height of triple storied buildings. |
| 8 | Complete removal of existing treatment from wall or ceilling surfaces by scrapping with mechanical sander machine upto entire saticsfication of Engr-in-Chage, all as specified and directed. Note : Work will be carried out upto a height of 12 mtrs |
| 9 | M&L for Preparation of newly plastered or scrapped surfaces of wall or ceiling and applying 1.5mm thick damp proof wall care putty in two coats as per manufacturer's instructions complete all as specified and directed. Note : 1. Work shall be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 10 | M&L for preparation of new surfaces/completely removed surfaces of wall / ceiling and applying Two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. |
| 11 | M&L for Preparation of old plastered surfaces/Putty surface of walls/ceilings by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed. Note: 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 12 | M&L for Preparation of old treated plastered surfaces of wall and applying one coat of weather proof exterior emulsion paint complete all as directed. Note: 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 13 | M&L for Preparation of old treated plastered/Puttied surfaces of walls and applying two coats of weather proof exterior emulsion paint complete all as directed. Note: 1. Work will be carried out upto a height of 12 mtrs. 2. Rates shall be inclusive of scaffoldings and other arrangements to reach the required height. |
| 14 | M&L for Preparation of old cement concrete interlocking paver block/chequered tile floor and similar flat concrete area on path, pedestal, hardstanding by brooming down or steel wire brushing, scrapping , removing grass roots in joints of paver block and cleaning all loose dirt & dust from the surface by fanning with air compressor and applying one coat of weather proof exterior emulsion paint as per original colour and pattern of tile, complete all as specified & directed. |
| 15 | M&L for preparation old steel surfaces (gates, fencing, grills, trusses, steel roof sheets and similar surfaces) of height upto 15 mtrs by removing mildew, dirt and any loose flaps of old paint and applying one coat of synthetic enamel paint by mechanical means (airless spaying machine) complete all as per manufacturer Instruction incl all scaffoldings and T&P and as directed by Engr in Charge. |
| 16 | M&L for preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 17 | M&L for preparation of Old painted steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint with approved shade complete all as specified and directed. |
| 18 | M&L for preparation old steel surfaces (gates, fencing, grills, trusses, steel roof sheets and similar surfaces) of any height by removing mildew, dirt and any loose flaps of old paint and applying two coats of synthetic enamel paint by mechanical means (airless spaying machine) complete all as per manufacturer Instruction incl all scaffoldings and T&P and as directed by Engr in Charge. |
| 19 | M&L for for preparation of old painted concrete, brick, stone or plaster surfaces including kerb stone, pillar surface and similar of any description over 10 cm width and girth and applying one coat of synthetic enamel paint complete all as directed. |
| 20 | M&L for preparation of old painted wooden surfaces over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified. |
| 21 | M&L for French polishing one or more coat on old polished wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler surfaces complete all as specified & directed. |
| 22 | M&L for one coat of primer on wall / ceiling through normal applications complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to required working) complete all as specified. |
| 23 | M&L for two coat of plastic emulsion (light / dark shade) on wall / ceiling through normal application using machinery etc complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement to required working) |
| 24 | M&L for preparation of existing old surface and applying one coat of plastic emulsion paint on walls complete upto to the height 15m complete all as per manufacturer instruction and directed by Engr in Charge (Rate shall be inclusive of scafolding and other arrangement torequired working) |
| 25 | M&L for providing and fixing 25 to 30mm thick plaster of paris ceilling/wall POP designer frame ( gypsum anhydrous) to flat surface over 2nd class soft wood fillets,or metal frame work and reinforced ,with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed |
| 26 | All as per item No. 25 here in above but to curved surface. |
| 27 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified & directed. |
| 28 | M&L for complete removal of existing paint and Finishing walls with textured exterior paint of required shade (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed. Please Enable Macros to View BoQ information |
