|
| 1 | Demolition Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar (1:6) complete all as specified and directed. |
| 3 | M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar (1:6) complete all as specified and directed. |
| 4 | M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including demolition of old brick work complete all as directed. |
| 5 | M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed. |
| 6 | M&L Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including demolition and use and waste of form work. . |
| 7 | Raking out joints to square rubble masonry, coursed or uncoursed and M & L for Raised pointing in CM 1:3 |
| 8 | M&L broken glass coping 25mm thick in CM (1:3) on top of wall including demolition of old coping complete all as specified and as directed. |
| 9 | M&L for preparation of Newly plastered surface and applying two coats of exterior antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- APEX of ASIAN paint or Equalent |
| 10 | S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 including dismantling old steel work complete all as specified and directed. |
| 11 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as directed |
| 12 | M&L Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified. |
| 13 | M&L for preparation of old painted steel/iron surafces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as directed |
| 14 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering |
| 15 | Supply and Laying natural grass carpet (Selection Number 1 Grass) including good and fine red earch/soil layer of 100 mm thick and watering and maintenance of Lawn for 03 Months or more till the grass forms a thick lown free from weeds and fit for mowing and Including (Coco pet, Neem cake & DDT powder) as per requirment as directed. |
| 16 | M&L 18 mm thick granite Chabutara (Non skid ) work in steps, jambs, pillars, window cills, cooking platforms, landings and like incl 10 mm thick screed bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges,including demolition of old granite of any thickness complete, all as specified and directed. |
| 17 | S&F Stainless steel railing made out of 304 grade steel with following specifications : |
| 18 | (a) Stainless steel hand rail of 50mm dia including bending at turns,welding and polishing complete(b) Stainless steel cross bars three nos 20mm dia fixed parallel to hand rail with balusters by welding.The ends of cross bars fixed with round bar spherical end cap including welding and polishing complete.(c) Stainless steel balusters of 900mm height and 38mm diameter pipes fixed at 90cm c/c.One end welded with hand rail and other fixed with step using anchorage clamps and dash fasteners etc as required at site to fix in position complete.(d) Stainless steel newel post 75mm dia with spherical cap fixed at starting and terminal point of railing.Newel post shall be fixed with brackets and dash fasteners etc complete. |
| 19 | Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed |
| 20 | M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed. |
| 21 | Material and labour providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in foundations, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed. |
| 22 | Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed. |
| 23 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in excavated soil |
| 24 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 25 | M&L for steel anchor bolts of length 15cm long, dia of neck 10 to 12 mm complete fixed in position complete all as directed |
| 26 | S&F Pre- painted galvalume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 27 | M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface. |
| 28 | M & L for 75 mm thick cement concrete 1 : 4 :8 type C-2, (using 40 mm graded stone aggregate) as in plinth protection and making joints and filling with bitumen sand mastic including necessary form work. |
| 29 | M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade, as in floors/pavings laid over 50 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete in all respect and all as specified. Make : NAVEEN/SPARTEK/NITC Please Enable Macros to View BoQ information |