|
| 1 | Taking down chowkats or frames with shutters (without) taking of shutters) from the frame n.exc 1.5 Sqm each all as directed |
| 2 | Taking down shutters from the frame exc 1.00 sqm & n.exc 2.00 Sqm each all as directed |
| 3 | Dismantling of Wall and ceiling boards or insulation boads/slabs any thickness, incl cover fillets all as directed. |
| 4 | M&L for 12mm thick Perforated particle board/tiles for insulation and accoustic purposes and applying two coats of synthetic enamel paint over one coat of pink primer, suitably placed over and including false ceiling grid made of Anodised powder coated aluminium snap grid of size 605x605mm frame including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long coplete all as connected all items as per specification and drawing and directed by Engineer in charge. |
| 5 | Providing & Fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 75mm x 50 mm ( Decorative) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising with property of being termite / borer proof , water / Moisture Proof & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, , all as per specifications drawings as directed by the Engineer-In-Charge. |
| 6 | Providing WPC cub board shutter/ patitions of thickness 18 mm ( ±0.25 ) consisting of desired size fixed to WPC frame work as in shutters and shelves of cabinets, cupboards fixed in repairs all as specified and as directed. |
| 7 | Providing & Fixing Factory Made 30 mm thick 100% Solid WPC ( Wood polymer Composite ) Decorative /Laminated / Plain Flush Door Shutter with Property of being Termite/ Borer Free, Water/ Moisture Proof & fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, |
| 8 | M&L for 12mm thick (No of ply 7) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws as in cabinets, shelves, kitchen cabinet and cup boards etc complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for Teak wood lipping 6mm thick fixed with nails to block board veneered particle board or block board complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for Prelaminated particle board 18/19mm thick, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cabinets, shelves, kitchen cabinet and cup boards etc complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for 30mm width of flap continuous (piano) hinges, mild steel bright finish or electro galvanised fixed to wooden complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F auto concealed hydraulic stainless steel spider/butterfly hinges suitable for cupboards complete all as directed. |
| 13 | S&F 100mm size handles of stainless steel fixed with screws complete all as specified. |
| 14 | S&F aluminium anodized barrel tower bolts 200mm of extruded section complete. |
| 15 | S&F aluminium anodized handles 150mm long complete. |
| 16 | S&F aluminium anodized barrel tower bolts 150mm of extruded section complete. |
| 17 | S&F 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete. |
| 18 | S&F floor door stopper of aluminum alloy body 140mm complete. |
| 19 | S&F100mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete. |
| 20 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc complete all as specified. |
| 21 | M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, urinal partitions and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges complete all as specified. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 23 | M&L for glazed ceramic coloured tiles (premium quality) 450x350 or 350x250 x6-7mm thick coloured on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 10 mm thick cement plaster in CM 1 :4 complete all as specified and directed. |
| 24 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1 :6 complete all as specified and directed. M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, urinal partitions and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges complete all as specified. Please Enable Macros to View BoQ information |
