|
| 1 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 3 | Demolition of Cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 4 | M&L 50 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors with using liquid water proofing compound @2% by weight of cement finished even and fair complete all as specified and directed. Note: Supply only WPC liquid shall be measured and paid seperately |
| 5 | Supply only Liquid water proofing compound |
| 6 | M&L 18 mm to 20 mm thick leather finished granite tiles (of any size) machine cut, laid with Laticrete 345 Super Flex Tile Adhesive Polymer Fortified Large and Heavy Tile Mortar or equiavalent for Interior and Exterior Installations jointed epoxy grout to match the shade of granite stone or as directed in steps, jambs, coping, cills, and like complete all as specified and as directed. |
| 7 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and as directed. |
| 8 | M&L Vitrified tiles of size 150x150mm 6 to 7 mm thick Water-resistant, glazed finish, Anti-slip surface Swimming Pool Tiles of approved colour to match with existing tiles laying on horizontal and vertical surfaces laid with MYK Laticrete 335 multimax Lite One-Step Polymer Fortified Large and Heavy Tile Mortar or equiavalent for Interior and Exterior Ceramic Tile Installations and pointed with grouting with epoxy by using grout float to press the epoxy grout into the joints full depth of tile fill the gaps completely, grout prepared/mixed as per manufacturer's instructions to mix the two-part epoxy system (resin and hardener) in the correct proportions and remove excess grout from the tile surface. The color epoxy grout to match with the existing surfaces or as directed including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.Make : Sika Ceram 888 Tile Grout EP/ Pidilite Roff Starlike 2 component/ Sika Ceram 850 Design/ MYK Laticrate SP-100™ Premium Epoxy Grout / Laticrete Spectra LOCK PRO Epoxy Grout Minitor as approved. |
| 9 | M&L Designer rubber moulded chequered cement concrete tiles of size 300 x 300 x 22mm or 250 x 250 x 22mm thick with mixture of grey and white cemetnt in equal porportions with pigments and set and pointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layier in CM (1:4) for laying floor finishes etc complete all as specified and as directed. |
| 10 | M&L Cutting chases 3mm thick & 8mm depth in wall of any description, cleaning with air pressure till the surfaces is fully dry and grouting with epoxy by using grout float to press the epoxy grout into the joints full depth of cutting to fill the gaps completely, grout prepared/mixed with two-part epoxy system (resin and hardener) in the correct proportions or asper manufacturer's instructions and remove excess grout from the tile surface. The colour epoxy grout to match with the existing surfaces complete all as per manufacturers instrructions,as specified and direted by Eng-in-charge.Make : Sika Ceram 888 Tile Grout EP/ Pidilite Roff Starlike 2 component/ Sika Ceram 850 Design/ MYK Laticrate SP-100™ Premium Epoxy Grout / Laticrete Spectra LOCK PRO Epoxy Grout Minitor as approved.Note: 1. Cutting grroves in existing flooring/dado with tiles of size 150mmx150mm. 2.The superficial area treated surface will be measured for payment purpose. |
| 11 | M&LCutting chases 3mm width & 8mm depth in floor or sloped surfaces of any description, cleaning with air pressure till the surfaces is fully dry and grouting with epoxy by using grout float to press the epoxy grout into the joints for full depth of cutting to fill the gaps completely, grout mix with two-part epoxy system (resin and hardener) in the correct proportions prepared/mixed or asper manufacturers instructions and remove excess grout from the tile surface. The color epoxy grout to match with the existing surfaces complete all as per manufacturers instrructions,as specified and direted by Eng-in-charge.Make : Sika Ceram 888 Tile Grout EP/ Pidilite Roff Starlike 2 component/ Sika Ceram 850 Design/ MYK Laticrate SP-100™ Premium Epoxy Grout / Laticrete Spectra LOCK PRO Epoxy Grout Minitor as approved. Note: 1. Cutting grroves in existing flooring/dado with tiles of size 150mmx150mm. 2.The superficial area treated surface will be measured for payment purpose. |
| 12 | M&L Drilling holes in to RCC wall or floor 10 to 12mm dia and 150 mm deep inserting Alluminium / PVC nozzels suitable for cementious grouting mixed with admixtures and grouting in existing concrete, including expanders like Sika® Intraplast® N-200, and Superplasticizers to polyurethanes (for waterproofing), sodium silicates, acrylates, epoxies, and acrylamide and filling grout holes with Non-shrink Grout complete all as per manufacturers instrructions,as specified and direted by Eng-in-charge.Make : Sika® Intraplast® N-200 , Fosroc Cebex 100, Chryso Excem C, Conbextra GP2 as approved |
| 13 | M&L Vitrified Ceramic tiles anti-skid matt finish of size 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed CM (1:4) complete all as specified and as directed. |
| 14 | M&L Gratings of size 600mmx600 mm making with Corrosion Resistance SS Grade 304 purpose made suitable to existing openings of swimming pool for inlet /out let / suction etc fixed with SS screws or epoxy or suitable chemical complete all as directed by Eng-in-charge. Please Enable Macros to View BoQ information |
