|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, etc complete all as specified and directed. |
| 2 | M&L for PCC 1:3:6 type C2 (40 mm gradede aggregate ) as in foundation and mass concrete complete all as specified and directed. |
| 3 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-290 (Gde E165) complete all as specified and directed. |
| 4 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed. |
| 5 | S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed. |
| 6 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and directed. |
| 7 | S&F PVC (SWR) half round 150mm dia with rounded edges incl all accessories like bend T etc for eaves gutter complete all as specified and directed. |
| 8 | S&F in 150mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors , fixed on walls with necessary clips complete all as specified and as directed. |
| 9 | S&F 110 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as specified and directed. |
| 10 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in soft /loose soil complete all as specified and directed. |
| 11 | M&L for hardcore of gauge n.exc.63mm (using broken stone or boulders) deposited, spread and levelled in layers not exc.15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 12 | M&L for 50 mm thick 1:2:4 type type B1 (20mm graded aggregate) as in base finished the surfaces fair and even complete all as specified and directed. |
| 13 | M&L for 100 mm thick 1:4:8 type D-1 (40mm graded aggregate) as in sub base finished the surfaces fair and even complete all as specified and directed. |
| 14 | Removing excavated soil to a dist n.exc.50m complete all as specified and directed. |
| 15 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamal paint over one coat of red oxide primer complete all as specified and directed. |
| 16 | Excavation in over areas n.exc 1.5m deep not exc 3.0 m deep and getting out in soft/loose soil and complete all as specified and directed. |
| 17 | M&L PCC type C2 1:4:8 using 40 mm graded stone aggregates on in foundation, filling and mass concrete complete all as specified and as directed. |
| 18 | M&L for walling of RR stone masonary uncoursed ,well bonded bedded and solidly hearted built in CM 1:6 incl brought upto course at interval of every 60 cm complete all as specified and directed. |
| 19 | M&L 15 mm thick rendering plaster on other than fair faces of stone masonary surfaces in CM 1:6 complete all as specified and as directed. |
| 20 | M&L Providing and laying 60mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and directed. |
| 21 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 22 | M&L for walling of random rubble, brought upto uncourse, well bonded bedded & solidely hearted, built in C:M (1:6) complete all as specified and as directed. |
| 23 | M&L for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed. |
| 24 | M&L for formwork to sides and soffits for rough finished of floors or roof beams, lintels cantilevers, shelves including supports etc complete all as specified and as directed |
| 25 | M&L Formwork to sides of concret foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed. |
| 26 | M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 27 | M&L RCC (Nominal mix) type B1, 1:2:4 using 20mm graded stone aggr as in beams, cantilevers, lintel over 1.5 m span complete all as specified and as directed |
| 28 | M&L for TMT bars 10mm dia and over cut to length bent to shape required incl, cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to IS:1786 complete all as specified and as directed |
| 29 | M&L for TMT bars 5mm dia and over upto and incld 10mm dia as in stirrups, spacers and binders and binding with MS wire not less than 0.9mm dia (annealed) conforming to IS:1786 complete all as specified and as directed. |
| 30 | Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cms in depth in soft/loose soils complete all as specified and directed. |
| 31 | Spreading and leveling in layers n.exc 25 cm thick selected earth under floors including watering well ramming etc complete all as specified and directed. |
| 32 | M&L for sand filling under floors including watering and consolidation complete all as specified and directed. |
| 33 | M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified and directed. |
| 34 | M&L for 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed. |
| 35 | S&F Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats etc conforming to Fe 410-W (Gde-E- 250) complete all as specified and directed. |
| 36 | M&L non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry & pointd in coloured cement to match incl 15mm thick screed bed with CM 1:6 complete all as specified and as directed. |
| 37 | M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry & pointed in colour cement to match complete all as specified and as directed. |
| 38 | M&L rendering 15mm thick in CM 1:6 on other than fair faces of brick or concrete surfaces complete all as specified and directed. |
| 39 | M&L for rendering 20 mm thick in CM (1:4) in two layers of 10mm each (outer layer CM should be added with WPC) on fair faces of brick or concrete surfaces, complete all as specified and directed. |
| 40 | Supply only water proofing compound complete all as specified and directed.. |
| 41 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.. |
| 42 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 43 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. |
| 44 | S&F 3mm thick, figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 45 | S&F 75mm long butt hinges medium weight cold rolled MS complete all as specified and directed. |
| 46 | S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 47 | S&F Aluminium handles, 150 mm size, cast type, anodised complete all as specified and directed. |
| 48 | S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling of laid in floors in repairs complete all as specified and directed. |
| 49 | S&F Viterous China wash down water closet pan (pedestal pattern) EWC, white (excluding fixing bolts, flushing cistern and flush pipe) and flush pipe fixed with 110 mm, Wash down water closet (Pedestal pattern), PVC (SWR) 'S' trap complete all as specified and as directed. |
| 50 | S&F PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified and directed. |
| 51 | S&F 15mm bore dia bib taps cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed. |
| 52 | S&F 15mm bore dia Stop cock cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 53 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 54 | M&L for hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 55 | M&L for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate), 75 mm thick as in plinth protection / approach path of bldg complete all as specified and directed. |
| 56 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed complete all as specified and directed. |
| 57 | M&L Preparation of newly plastered surfaces of walls and applying three coat of white wash on new surfaces of walls complete all as specified and directed. |
| 58 | M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of suitable primer on new surfaces of walls complete all as specified and directed. |
| 59 | S&F 110 mm dia PVC vent cowl complete all as specified and directed. |
| 60 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall/trenches with necessary clamps,bolts etc complete all as specified and directed. |
| 61 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 62 | S&F 110 mm bore PVC (SWR) Tee complete all as specified and directed. |
| 63 | S&F vitreous china, white, flat back wash hand basin of size 550 mm x 440 mm including matching pedestal fixed with and including CP brackets (of suitable size) including 32 mm bore brass chromium plated waste coupling, 32 mm dia PVC waste pipe etc. complete including taking down old wash hand basin alongwith fittings complete all as specified and directed. |
| 64 | S& F Soap dish, vitreous China white, approximate size 160x 160x90mm. any type, fixed to plugs with chromium plated brass screw complete all as specified and directed. |
| 65 | S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 66 | S&F Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and directed. |
| 67 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 68 | M&L Concrete bed to drain pipe of 110m m dia including packing under and haunching against the side or pipe after they are laid and tested in complete all as specified and directed. |
| 69 | S&F Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 70 | S&F 500 litre Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including float valve 20 mm dia complete all as specified and directed. |
| 71 | M&L for PCC 1:3:6 type C-2 (using 40mm stone agg) as in surface channel / drains complete all as specified and directed. |
| 72 | Extra for forming fair finished drain or channel 30 cm inner girth cement concrete using extra cement including forms moulds mitred and stopped ends etc complete all as specified and directed by the Engr-in-Charge. |
| 73 | S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed. |
| 74 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 75 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick screed in CM 1:6 etc complete all as specified and directed. |
| 76 | M&L point wiring complete with 1.5 Sqm sincle core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, for one light point/ Exhaust fan point controlled by one switch complete all as specified and as directed. |
| 77 | All as per Sch A item No 76 above but One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and as directed. . |
| 78 | S&F modular switch single pole , one way 6 Amp 1 module 230 Volts,50Hz, ISI marked complete all as specified and as directed. |
| 79 | S&F Socket outlet 2 in 1, 3 pin ,6A 230 Volts,50Hz, ISI marked complete all as specified and as directed. |
| 80 | S&F ceiling rose, 3 phase ,PVC polycarbonate ,insulated body (ISI Marked) complete all as specified and as directed. |
| 81 | S&F LED lights fitting 1x18 watt 220 V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 82 | S&F lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as specified and as directed. |
| 83 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter , voltage 230 v ,50 hz RPM 1200, copper winding of sweep 250 mm complete with all accessories complete all as specified and as directed. |
| 84 | Supply and laying DWC pipe SN-4 with coupler 40mm OD, ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, PartII complete with fitting and cutting , jointing etc. Laid in trenches/fixed to pole /laying under road crossing /fixed on pavement wall with clamps complete all as specified and as directed |
| 85 | Supply ,laying ,jointing and testing in trenches or passing through pipe, 1100 Volts grade XLPE insulated, armoured heavy duty electric cable with aluminium conductor of cross sectional area 6 Sqmm 2 core with necessary fixing arrangements such as lugs, glands and terminal etc complete all as specified and as directed. |
| 86 | M&L for Excavation in trenches n. Exc 1.5 mtr wide and n.exc 1.5 mtr depth for laying of cable / foundation of pole and getting out in loose /hard /rocky soil complete all as specified and as directed. |
| 87 | M&L for Returning filling in loose /hard /rocky soil including spreading ,levelling ,watering and well ramming in layers not exceeding 25cm complete all as specified and as directed. |
| 88 | M&L for Removal of surplus excavated (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed. |
| 89 | S&F for sheet metal enclosure for 4 way distribution boards (DB's) single pole and neutral, double door suitable for fixing MCBs/ isolator fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed. |
| 90 | S&F MCB SPN 32 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed. |
| 91 | S&F MCB single pole 6 to 32 Amps , 240 Volts , 10 KA rupturing capacity , C curve complete all as specified and as directed. |
| 92 | M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DBs including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed by Engineer-in-Charge including testing on completion. |
| 93 | Supply & Fixing rotational moulded polythene water storage tank 500 Ltrs capacity, ISI marked multi multilayer constraction (cylindrical vertical with closed top) hoisted & fixed in position including supply and fixing of 25mm bore ball valves , high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and as directed |
| 94 | M&L for 25mm dia steel tubing medium grade galvanised with all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed |
| 95 | Supply & fix 25 mm bore Gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and directed Please Enable Macros to View BoQ information |
